|
HP OpenVMS Systems Documentation |
|
HP TCP/IP Services for OpenVMS
|
| Previous | Contents | Index |
While the master file format itself is class independent, all records in a master file must be of the same class. The master file directives are described in the following list:
$ORIGIN example.com WWW CNAME MAIN-SERVER |
WWW.EXAMPLE.COM. CNAME MAIN-SERVER.EXAMPLE.COM. |
A slave name server saves backup copies of the zone data in
SYS$SPECIFIC:[TCPIP$BIND]. Do not delete these backup copies. When the
master server is down and the slave server is running, the slave server
cannot perform a zone transfer until the master server comes back up.
However, with backup copies, the slave server has some data (though
possibly out of date) to perform its basic tasks.
6.6.4 Sample Database Files
The following sections provide sample BIND database files.
6.6.4.1 Local Loopback
In the LOCALHOST.DB file, the local host address is usually 127.0.0.1. The following sample LOCALHOST.DB file shows the forward translation for the local loopback interface:
;
; File name: LOCALHOST.DB
; Product: HP TCP/IP Services for OpenVMS
; Version: V5.4
;
; © Copyright 1976, 2003 Hewlett-Packard Development Company, L.P.
;
; BIND data file for local loopback interface (forward translation).
;
;
$ORIGIN localhost.
@ 1D IN SOA @ root (
42 ;Serial
3H ;Refresh
15M ;Retry
1W ;Expiry
1D ) ;Minimum
;
1D IN NS @
1D IN A 127.0.0.1
|
The following sample 127_0_0.DB file shows the reverse translation for the local loopback interface:
;
; File name: 127_0_0.DB
; Product: HP TCP/IP Services for OpenVMS
; Version: V5.4
;
; © Copyright 1976, 2003 Hewlett-Packard Development Company, L.P.
;
;
; BIND data file for local loopback interface (forward translation)
;
$ORIGIN 0.0.127.in-addr.arpa.
@ 1D IN SOA localhost.root.localhost. (
42 ;Serial
3H ;Refresh
15M ;Retry
1W ;Expiry
1D ) ;Minimum
;
1D IN NS localhost.
1 1D IN PTR localhost.
|
These local host databases provide forward and reverse translation for
the widely used LOCALHOST name. The LOCALHOST name is always associated
with the IP address 127.0.0.1 and is used for local loopback traffic.
6.6.4.2 Hint File
This file contains root name server hints. Any name server running on a host without direct Internet connectivity should list the internal roots in its hint file.
The following sample shows a ROOT.HINT file. In earlier releases, this file was called NAMED.CA:
; ; File name: ROOT.HINT ; Product: HP TCP/IP Services for OpenVMS ; Version: V5.4 ; ; © Copyright 1976, 2003 Hewlett-Packard Development Company, L.P. ; ; ; DESCRIPTION: ; ; Data file for initial cache data for root domain servers. ; ; <<>> DiG 9.2.1 <<>> ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 11672 ;; flags: qr rd ra; QUERY: 1, ANSWER: 13, AUTHORITY: 0, ADDITIONAL: 13 ;; QUESTION SECTION: ;. IN NS ;; ANSWER SECTION: . 102059 IN NS A.ROOT-SERVERS.NET. . 102059 IN NS B.ROOT-SERVERS.NET. . 102059 IN NS C.ROOT-SERVERS.NET. . 102059 IN NS D.ROOT-SERVERS.NET. . 102059 IN NS E.ROOT-SERVERS.NET. . 102059 IN NS F.ROOT-SERVERS.NET. . 102059 IN NS G.ROOT-SERVERS.NET. . 102059 IN NS H.ROOT-SERVERS.NET. . 102059 IN NS I.ROOT-SERVERS.NET. . 102059 IN NS J.ROOT-SERVERS.NET. . 102059 IN NS K.ROOT-SERVERS.NET. . 102059 IN NS L.ROOT-SERVERS.NET. . 102059 IN NS M.ROOT-SERVERS.NET. ;; ADDITIONAL SECTION: A.ROOT-SERVERS.NET. 188459 IN A 198.41.0.4 B.ROOT-SERVERS.NET. 188459 IN A 128.9.0.107 C.ROOT-SERVERS.NET. 188459 IN A 192.33.4.12 D.ROOT-SERVERS.NET. 188459 IN A 128.8.10.90 E.ROOT-SERVERS.NET. 188459 IN A 192.203.230.10 F.ROOT-SERVERS.NET. 188459 IN A 192.5.5.241 G.ROOT-SERVERS.NET. 188459 IN A 192.112.36.4 H.ROOT-SERVERS.NET. 188459 IN A 128.63.2.53 I.ROOT-SERVERS.NET. 188459 IN A 192.36.148.17 J.ROOT-SERVERS.NET. 188459 IN A 192.58.128.30 K.ROOT-SERVERS.NET. 188459 IN A 193.0.14.129 L.ROOT-SERVERS.NET. 188459 IN A 198.32.64.12 M.ROOT-SERVERS.NET. 188459 IN A 202.12.27.33 ;; Query time: 1069 msec ;; SERVER: 127.0.0.1#53(127.0.0.1) ;; WHEN: Tue May 6 11:06:27 2003 ;; MSG SIZE rcvd: 436 |
This cache initialization file contains NS records that name root servers and A records that provide the addresses of root servers.
To create a ROOT.HINT file:
This procedure creates the ROOT.HINT file and places the file in the
SYS$SPECIFIC:[TCPIP$BIND] directory.
6.6.4.3 Forward Translation File
The forward translation file, domain_name.DB, stores host-name-to-address mapping. For example, the database file UCX_ERN_SEA_COM.DB is created for the domain UCX.ERN.SEA.COM.
The following example shows a domain_name.DB file:
$TTL 86400
$ORIGIN ucx.ern.sea.com.
@ IN SOA owl.ucx.ern.sea.com. pmaster.owl.ern.sea.com.
(
23 ; Serial
600 ; Refresh
300 ; Retry
172800 ; Expire
43200 ) ; Minimum
;
IN NS owl.ucx.ern.sea.com.
IN NS condor.ucx.ern.sea.com.
;
thrush IN A 9.20.208.53
condor IN A 9.20.208 or 90
birdy IN A 9.20.208.47
IN MX 10 birdy.ucx.ern.sea.com.
IN MX 100 inet-gw-1.pa.emu.com.
IN MX 100 mts-gw.pa.emu.com.
IN MX 200 crl.emu.com.
IN MX 300 nester.emu.com.
seagull IN A 9.20.208.30
IN MX 10 seagull.ucx.ern.sea.com.
IN MX 100 inet-gw-1.pa.emu.com.
IN MX 100 mts-gw.pa.emu.com.
IN MX 200 crl.emu.com.
IN MX 300 nester.emu.com.
owl IN A 9.20.208.72
IN MX 10 owl.ucx.ern.sea.com.
IN MX 100 inet-gw-1.pa.emu.com.
IN MX 100 mts-gw.pa.emu.com.
IN MX 200 crl.emu.com.
IN MX 300 nester.emu.com.
peacock IN A 9.20.208.73
IN MX 10 pultdown.ucx.ern.sea.com.
IN MX 100 inet-gw-1.pa.emu.com.
IN MX 100 mts-gw.pa.emu.com.
IN MX 200 crl.emu.com.
IN MX 300 nester.emu.com.
redwing IN A 9.20.208.79
IN MX 10 redwing.ucx.ern.sea.com.
IN MX 100 inet-gw-1.pa.emu.com.
IN MX 100 mts-gw.pa.emu.com.
IN MX 200 crl.emu.com.
IN MX 300 nester.emu.com.
robin IN A 9.20.208.47
IN A 9.20.208.30
IN A 9.20.208.72
|
This file is created only for the master server. All other servers obtain this information from the master server. This file contains most of the domain information and has the following characteristics:
MX records identify the servers in a domain that are used for
forwarding mail. Use MX records and preference numbers to define the
order in which mail servers are used. The lower the preference number,
the more desirable the server.
6.6.4.4 Reverse Translation File
The reverse translation file, address.DB, stores address-to-host-name mapping (reverse mapping) information. For example, the database file 208_20_9_IN-ADDR_ARPA.DB is created for the domain 208.20.9.IN-ADDR.ARPA.
The following example shows an address.DB file:
$TTL 86400
$ORIGIN 208.20.9.in-addr.arpa.
@ IN SOA owl.ucx.ern.sea.com. pmaster.owl.ucx.ern.sea.com.
(
1 ; Serial
600 ; Refresh
300 ; Retry
172800 ; Expire
43200 ) ; Minimum
;
IN NS owl.ucx.ern.sea.com.
IN NS condor.ucx.ern.sea.com.
;
53 IN PTR thrush.ucx.ern.sea.com.
10 IN PTR condor.ucx.ern.sea.com.
47 IN PTR birdy.ucx.ern.sea.com.
30 IN PTR seagull.ucx.ern.sea.com.
72 IN PTR owl.ucx.ern.sea.com.
73 IN PTR peacock.ucx.ern.sea.com.
79 IN PTR redwing.ucx.ern.sea.com.
|
PTR records predominate in this file because they are used to translate
addresses to host names.
6.7 Examining Name Server Statistics
The BIND server collects statistics that record server activity. To examine BIND statistics, use one of the following commands:
Statistics are logged to the TCPIP$BIND.STATS file, located in SYS$SPECIFIC:[TCPIP$BIND].
The following sample shows a statistics log:
+++ Statistics Dump +++ (1004986341) success 17 referral 0 nxrrset 1 nxdomain 1 recursion 6 failure 0 --- Statistics Dump --- (1004986341) |
The statistics dump begins with the line +++ Statistics Dump +++ (973798949) . The number in parentheses is a standard UNIX timestamp, measured as seconds since January 1, 1970. Following that line are a series of lines containing a counter type, the value of the counter, a zone name (optional), and a view name (optional).
The lines without view and zone listed are global statistics for the entire server. Lines with a zone and view name are for the given view and zone. (The view name is omitted for the default view.)
The statistics dump ends with the line --- Statistics Dump --- (973798949) The number in parentheses is identical to the number in the beginning line.
The following statistics counters are maintained:
The following sections describe how to set up BIND servers manually using the TCP/IP management command SET CONFIGURATION BIND.
This command creates a UCX Version 4.x configuration. If you set up your BIND name server using this command, you must also use the TCP/IP management command CONVERT/CONFIGURATION BIND command to convert the databases to the BIND Version 9 format. If you omit this step, your changes will not take effect. |
To instruct the master name server to read the appropriate database files using the information in TCPIP$CONFIGURATION.DAT, use the SET CONFIGURATION BIND command. Use the SHOW CONFIGURATION BIND command to display BIND information from the configuration database (TCPIP$CONFIGURATION.DAT).
The following commands tell the name server to read the appropriate files:
TCPIP> SET CONFIGURATION BIND /CACHE TCPIP> SET CONFIGURATION BIND - _TCPIP> /PRIMARY=(DOMAIN:0.0.127.IN-ADDR.ARPA, FILE:NAMED.LOCAL) TCPIP> SET CONFIGURATION BIND - _TCPIP> /PRIMARY=(DOMAIN:UCX.ERN.SEA.COM, FILE:UCX_ERN_SEA_COM.DB) TCPIP> SET CONFIGURATION BIND - _TCPIP> /PRIMARY=(DOMAIN:208.20.9.IN-ADDR.ARPA, FILE:208_20_9_IN-ADDR_ARPA.DB) |
To view these settings, use the SHOW CONFIGURATION BIND command.
6.8.2 Setting Up a Secondary (Slave) Name Server
You can configure a secondary server to populate itself by copying the DNS database files from the master server.
To configure a secondary server, enter the following commands:
TCPIP> SET CONFIGURATION BIND /CACHE TCPIP> SET CONFIGURATION BIND - _TCPIP> /PRIMARY=(DOMAIN:0.0.127.IN-ADDR.ARPA, FILE:NAMED.LOCAL) TCPIP> SET CONFIGURATION BIND - _TCPIP> /SECONDARY=(DOMAIN:UCX.ERN.SEA.COM, - _TCPIP> FILE:UCX_ERN_SEA_COM.DB,HOST:OWL) TCPIP> SET CONFIGURATION BIND - _TCPIP> /SECONDARY=(DOMAIN:208.20.9.IN-ADDR.ARPA, - _TCPIP> FILE:208_20_9_IN-ADDR_ARPA.DB, - _TCPIP> HOST:OWL.UCX.ERN.SEA.COM) |
To configure a cache-only server, enter the following command:
TCPIP> SET CONFIGURATION BIND /CACHE |
This command points the server to the file NAMED.CA.
6.8.4 Setting Up a Forwarder Name Server
To configure a forwarder server, enter the following command:
TCPIP> SET CONFIGURATION BIND /FORWARDERS=(HOST:host) |
In this command, host specifies the forwarding server.
You cannot set up a server to be both a forwarder and a caching server. |
Your host uses the BIND resolver to obtain information from a name server. When a request for name translation arrives, the resolver first searches the local host database for the host information. If the information is not found, the resolver then queries the BIND name server for host information.
The BIND resolver is based on the BIND Version 8 implementation of DNS. |
The resolver is automatically configured by TCPIP$CONFIG when you choose Option 1 --- Core Environment . To display your resolver configuration, enter the following TCP/IP management command:
TCPIP> SHOW NAME_SERVICE |
TCP/IP Services displays the following data:
BIND Resolver Parameters Local domain: ucx.ern.sea.com System State: Started, Enabled Transport: UDP Domain: ucx.ern.sea.com Retry: 4 Timeout: 4 Servers: lark Path: ucx.ern.sea.com,ern.sea.com,sea.com Process State: Enabled Transport: Domain: Retry: Timeout: Servers: Path: |
Here, host LARK in the current domain is the default name server. To add records to the local hosts database, use the SET HOST command. For example, the following command adds host birdy to the local hosts database. (For more information about using SET commands, see the HP TCP/IP Services for OpenVMS Management Command Reference manual.)
TCPIP> SET HOST birdy /ADDRESS=9.20.208.47 |
To delete server entries from the configuration database or to add new entries, enter the following command:
TCPIP> SET NAME_SERVICE /NOSERVER=LARK /SYSTEM |
This command modifies the volatile database. To make a change to the permanent database, enter the SET CONFIGURATION NAME_SERVICE command.
To view the results, enter the SHOW CONFIGURATION NAME_SERVICE command.
6.9.1 Changing the Default Configuration
To add a new server and enable the BIND resolver, enter the following command:
TCPIP> SET NAME_SERVICE /SERVER=host /ENABLE /SYSTEM |
For host, specify the host name or IP address of the BIND server or servers that the BIND resolver is to query.
To specify multiple hosts, list them by request preference. The BIND resolver sends the first lookup request to the first host on the list.
If you define a server list and then add a new server with the SET NAME_SERVICE /SERVER command, the new server is added to the end of the list.
SET commands affect the volatile database. To save your changes to the permanent database, use the SET CONFIGURATION commands. The changes you make with the SET CONFIGURATION commands take effect the next time the software starts up. For example:
TCPIP> SET CONFIGURATION NAME_SERVICE /SERVER=host /ENABLE |
TCPIP> SHOW CONFIGURATION NAME_SERVICE BIND Resolver Configuration Transport: UDP Domain: ucx.ern.sea.com Retry: 4 Timeout: 4 Servers: 9.20.208.47, 9.20.208.53 Path: No values defined |
The following command defines hosts PARROT, SORA, and JACANA as systemwide BIND servers and enables the BIND resolver:
PARROT> TCPIP TCPIP> SET NAME_SERVICE /SERVER=(PARROT,SORA,JACANA) /SYSTEM /ENABLE |
The following example defines, for the current login session, host OSPREY as the BIND server. As a result, the servers that are defined systemwide are not queried.
TCPIP> SET NAME_SERVICE /SERVER=OSPREY |
By default, if no search list is defined and the host name as you typed it has no dot (.) in the name, the BIND resolver performs a lookup using the following forms of the host name (in this order):
For example, suppose you enter the following command:
TCPIP> SHOW HOST OWL |
Assuming that the default domain is ucx.ern.sea.com , the resolver performs lookups as follows:
This behavior is different than the resolver lookup behavior in previous releases (UCX BIND Version 4.x.). The following section provides more information.
| Previous | Next | Contents | Index |