[an error occurred while processing this directive]

HP OpenVMS Systems Documentation

Content starts here HP TCP/IP Services for OpenVMS

HP TCP/IP Services for OpenVMS
Management Command Reference


Previous Contents Index

Attempts to mount the /usr file system. If it cannot, it waits 1 minute and retries the connection up to 20 times.

#4

TCPIP> MOUNT DNFS5:[USERS.MNT] /HOST="sigma" /PATH="/usr"
%DNFSMOUNT-S-MOUNTED, /usr mounted on _DNFS5:[USERS.MNT]

TCPIP> MOUNT DNFS5:[USERS.MNT] /HOST="sigma" /PATH="/usr/users" /FORCE
%DNFSMOUNT-S-REMOUNTED, _DNFS5:[USERS.MNT] remounted as /usr/users on SIGMA
      

Specifies a lower level in the NFS server path with the second mount. This constitutes another path name and qualifies for an overmount.

#5

TCPIP> MOUNT DNFS22:[USERS.SMITH.MNT] /HOST="sigma" /PATH="/usr"
%DNFSMOUNT-S-MOUNTED, /usr mounted on _DNFS22:[USERS.SMITH.MNT]

TCPIP> MOUNT DNFS22:[USERS.SMITH] /HOST="sigma" /PATH="/usr" /FORCE
%DNFSMOUNT-S-MOUNTED, /usr mounted on _DFS22:[USERS.SMITH]
%TCPIP-I-OCCLUDED, previous contents of _DNFS22:[USERS.SMITH] occluded

      

The /FORCE qualifier performs an occluded mount. If you issue the DIRECTORY command, the NFS client occludes (hides from view) the subdirectory dropped from the first MOUNT command.

To make the directory visible again, either issue the SHOW MOUNT command (both mounts will be visible) or dismount DNFS22:[USERS.SMITH].

#6

TCPIP> MOUNT DNFS0: BOOK1 BEATRICE -
_TCPIP> /PATH="/INFERNO" -
_TCPIP> /HOST="FOO.BAR.EREWHON" -
_TCPIP> /STRUCTURE=5 -
_TCPIP> /SYSTEM
      

Mounts path INFERNO with label BOOK1 and logical name BEATRICE. Specifies the volume structure as ODS-5.


PING

Sends ICMP ECHO packets to hosts to determine whether they are active. Same as the LOOP command.

Format

PING [ host ]
[ /ADDRESS=xx.xx.xx.xx ]
[ /ALL ]
[ /FULL ]
[ /NUMBER_PACKETS=n ]
[ /PACKET_SIZE=n ]
[ /PATTERN="hexadecimal-string" ]
[ /[NO]ROUTE ]
[ /WAIT=n ]


Parameters

host

Specifies the host to which the test packets are sent.
Omitting host tests the TCP/IP Services software on the local node, as defined by the system logical TCPIP$INET_HOST.

Qualifiers

/ADDRESS=xx.xx.xx.xx

Optional.

Specifies the IP address of the host to which the test packets are sent.

/ALL

Optional. Default: Not all requests.

Displays all ICMP ECHO_REQUESTs, even if not in direct response to this operation.

/FULL

Optional.

Numeric output only. No attempt is made to look up symbolic names for host addresses. This occurs only when displaying ICMP packets other than ECHO_RESPONSE.

/NUMBER_PACKETS=n

Optional. Default: 4 packets

Specifies the number of packets to send. If you specify 0, packets are sent continuously until you terminate it with Ctrl/C.

/PACKET_SIZE=n

Optional. Default: 64 bytes.

Specifies the size of the ICMP ECHO_REQUEST.

/PATTERN="hexadecimal-string"

Optional.

Fills out the packet you send with up to 16 bytes, which is useful for diagnosing data-dependent problems. The string is a hexadecimal string of up to 32 characters (16 bytes).

For example, /PATTERN="ff" causes the sent packet to be filled with ones (1).

/ROUTE

/NOROUTE

Optional. Default: /ROUTE.
/ROUTE Request is routed through the normal routing tables.
/NOROUTE Normal routing tables are bypassed.
If the host is not on the LAN, you get an error.

/WAIT=n

Optional.

Specifies the number of seconds to wait between sending packets.


Examples

#1

TCPIP> PING dented
      

Specifies that the local host test the connectivity path to host dented .


REMOVE DIRECTORY

Removes a link to a directory within a UNIX container directory. If there are no other links to it, the directory is deleted.

Related commands: CREATE DIRECTORY, DIRECTORY

Applies to: NFS server


Format

REMOVE DIRECTORY "/path/name"

restrictions

Requires:
  • Read and write access to the parent directory
  • BYPASS privilege

Parameters

"/path/name"

Required.

Directory with the link you want to remove.


Examples

#1

TCPIP> REMOVE DIRECTORY "/eagles/eaglet"
      

Removes a link to the directory /eagles/eaglet .


REMOVE EXPORT

Deletes directory names from the export database so that they are not available for mounting by an NFS client.

Related commands: ADD EXPORT, SHOW EXPORT, MAP, SET CONFIGURATION MAP, SET CONFIGURATION NOMAP, SHOW MAP, SHOW CONFIGURATION MAP

Applies to: NFS server


Format

REMOVE EXPORT "/path/name"
[ /[NO]CONFIRM ]
[ /HOST=host ]

restrictions

Requires read and write access to the export database.

Parameters

"/path/name"

Required.

Directory name to delete from the export database.


Qualifiers

/CONFIRM

/NOCONFIRM

Optional. Default: /CONFIRM if you use a wildcard.

When the software encounters a match, it displays a description and solution. If /CONFIRM is enabled, the software then requests confirmation before deleting each directory name. Enter one of the following:

  • Y to delete the name
  • N to retain the name

If you specify the /NOCONFIRM qualifier, the operation is performed without asking you to confirm the request.

/HOST=host

Optional. Default: /HOST=* (all hosts).

Host, running NFS client, that will become unable to access the specified container directory.

Format for multiple hosts:

/HOST=("host0","host1", "host2")


Examples

#1

TCPIP> REMOVE EXPORT "/house/finch"
      

Removes the name of container directory /house/finch from the export database. This directory is now inaccessible to NFS client users.

#2

TCPIP> REMOVE EXPORT "/oceans/swamps" /HOST=("tern","crane")
      

Modifies the accessibility of local UNIX directory /oceans/swamps . This directory is now unavailable to users working on hosts tern and crane , which run NFS client software.


REMOVE FILE

Removes a link to a file within a container directory. If there are no other links to it, the file is deleted.

Related commands: DIRECTORY, REMOVE DIRECTORY

Applies to: NFS server


Format

REMOVE FILE "/path/name"

restrictions

Requires:
  • Read and write access to the parent directory
  • BYPASS privilege

Parameters

"/path/name"

Required.

File with the link you want to remove.


Examples

#1

TCPIP> REMOVE FILE "/peacock/feather.care/preening"
      

Removes the NFS link to the file preening .


REMOVE MAIL

Deletes mail messages from SMTP queues.

Without the user parameter, all messages from the user name that correspond to your process's user name are deleted.

Related commands: SEND MAIL, SHOW MAIL

Applies to: SMTP


Format

REMOVE MAIL [ user ]
[ /[NO]COPY=[directory] ]
[ /[NO]CONFIRM ]
[ /ENTRY=n ]

restrictions

Requires SYSPRV or BYPASS privilege for mail messages that are not yours.

Parameters

user

Optional. Default: All mail messages with your process's user name.

Removes messages sent from the specified user name.


Qualifiers

/COPY=[directory]

/NOCOPY=[directory]

Optional. Default: Messages copied to the user's default directory.

Copies messages to be deleted to the specified directory.

/NOCOPY: Messages are not copied.

/CONFIRM

/NOCONFIRM

Optional. Defaults:
  • With an entry number specified --- /NOCONFIRM
  • Without an entry number specified --- /CONFIRM

If you specify /CONFIRM, or if you omit an entry number, requests confirmation before deleting each message. Respond to the CONFIRM: prompt by entering one of the following:

  • Y to delete the mail message
  • N to retain the mail message
  • G to change to NO CONFIRMATION mode

If you specify the /NOCONFIRM qualifier or an entry, the operation is performed without asking you to confirm the request.

/ENTRY=n

Optional. Default: All.

Queue entry numbers to remove from the SMTP queue.


Examples

#1

TCPIP> REMOVE MAIL
      

Removes all messages for your process's user name, or deletes everything in the SMTP queue if you have either SYSPRV or BYPASS privilege.

#2

TCPIP> REMOVE MAIL /ENTRY=781
      

Removes message 781, if it corresponds to your process's user name, or if you have either SYSPRV or BYPASS privilege.

#3

TCPIP> REMOVE MAIL BROOD
      

Removes all messages for BROOD, if your process's user name is BROOD, or if you have either SYSPRV or BYPASS privilege.

#4

TCPIP> REMOVE MAIL /USER_NAME=COCKATOO /COPY=[COCKATOO.OLD_MAIL]
      

Removes all messages for COCKATOO, if this is your process's user name, or if you have either SYSPRV or BYPASS privilege. Before deletion, copies this queued mail to the specified directory.


REMOVE PROXY

Deletes entries from the volatile and permanent proxy database.

Related commands: ADD PROXY, SHOW PROXY

Applies to: NFS server, NFS client, PC-NFS, remote shell, LPR/LPD, and customer-developed services


Format

REMOVE PROXY [ user_name ]
[ /COMMUNICATION ]
[ /[NO]CONFIRM ]
[ /GID=n ]
[ /HOST=host ]
[ /NFS=options ]
[ /PERMANENT ]
[ /REMOTE_USER=user ]
[ /UID=n ]

restrictions

Requires:
  • Read and write access to the proxy database
  • One of the following privileges:
    • SYSPRV
    • SYSLCK
    • OPER

Parameters

user_name

Optional. Default: All entries (REMOVE PROXY *).

Deletes the specified entries from the proxy database.


Qualifiers

/COMMUNICATION

Optional. Default: Both communication and NFS entries.

Deletes communication (non-NFS) proxies.

/CONFIRM

NOCONFIRM

Optional. Default: /CONFIRM if you use a wildcard.

With /CONFIRM enabled, the software requests confirmation before deleting records. At the CONFIRM: prompt, enter one of the following:

  • Y to delete the entry
  • N to retain the entry
  • G to change to NO CONFIRMATION mode

If you specify the /NOCONFIRM qualifier, the operation is performed without asking you to confirm the request.

/GID=n

Optional. Default: All GIDs.

Deletes only proxies for the specified group identifier (GID).

/HOST=host

Optional. Default: All hosts.

Deletes only proxies for the specified host.

/NFS=INCOMING

/NFS=OUTGOING

Optional. Default: /NFS=(INCOMING,OUTGOING).

Deletes an NFS proxy. Specify one of the following:

/NFS=OUTGOING Proxy to use NFS client
/NFS=INCOMING Proxy to use NFS server
/NFS=(OUTGOING,INCOMING) Proxy to use NFS client and NFS server

/PERMANENT

Optional. Default: None.

Deletes entries only from the permanent proxy database.

/REMOTE_USER=user

Optional. Default: None.

Deletes entries for the specified remote user name.

/UID=n

Optional. Default: All UIDs.

Limits the search of entries to delete to proxies for the specified UID.


Examples

#1

TCPIP> REMOVE PROXY "peacock" /HOST=GOLDEN /UID=83
      

Removes authorization for UID 83 on host GOLDEN from OpenVMS account peacock .

#2

TCPIP> REMOVE PROXY /HOST=GOLDEN /UID=83
      

Removes authorization for UID 83 from host GOLDEN.

#3

TCPIP> REMOVE PROXY /HOST=("goose","grouse")
      

Removes authorization for all users on hosts goose and grouse .

#4

TCPIP> REMOVE PROXY /UID=83
      

Totally removes authorization for UID 83.

#5

TCPIP> REMOVE PROXY VMS_USER /REMOTE=PARTRIDGE /HOST=*
      

Removes authorization for remote user PARTRIDGE on all hosts.


SEND MAIL

Requeues a mail message for delivery. Releases jobs that are in a hold state.

Related commands: REMOVE MAIL, SHOW MAIL

Applies to: SMTP


Format

SEND MAIL [ user ]
[ /AFTER=time ]
[ /[NO]CONFIRM ]
[ /ENTRY=n ]

restrictions

SYSPRV or BYPASS privilege required to requeue mail messages that do not correspond to your process's user name.

Parameters

user

Optional. Default: All.

Requeues messages sent from the specified user name.


Qualifiers

/AFTER=time

Optional. Default: Immediate delivery attempt.

Time after which delivery is to be attempted.

/CONFIRM

/NOCONFIRM

Optional. Defaults:
  • With an entry number specified --- /NOCONFIRM
  • Without an entry number specified --- /CONFIRM

With /CONFIRM enabled, the software requests confirmation before deleting each message when you omit an entry number. At the CONFIRM: prompt, enter one of the following:

  • Y to delete the message
  • N to retain the message
  • G to change to NO CONFIRMATION mode

With /NOCONFIRM enabled, the operation is performed without asking you to confirm the request.

/ENTRY=n

Optional.

Queue number of the mail message to be re-queued for delivery.


SET ARP

Provides the dynamic mapping from an IP address to the corresponding physical network address (hardware address) on an FDDI, Ethernet, or Token Ring LAN segment.

SET NOARP removes an address-mapping pair (IP address to physical network address).

Related command: SHOW ARP


Formats

SET ARP mac_address host
[ /[NO]PERMANENT ]
[ /[NO]PUBLIC ]

SET NOARP [host]

restrictions

Requires OPER privilege.

Parameters

mac_address

Required.

Specifies the physical network adddress (the hardware address) on an FDDI, Ethernet, or Token Ring LAN segment to be mapped to an IP address.

For mac_address, specify hh-hh-hh-hh-hh-hh, where hh are pairs of hexadecimal digits.

host

Required.

Specifies the host on the targeted LAN segment. If you do not supply a host name, you must supply its corresponding IP address.


Qualifiers

/PERMANENT

/NOPERMANENT

Optional. Default: /PERMANENT.

Specifies whether the mapping information is cached.

/NOPERMANENT removes ARP mapping after the caching interval.

Not valid with SET NOARP.

/PUBLIC

/NOPUBLIC

Optional. Default: /PUBLIC.

Specifies whether the local ARP responds to ARP requests from other hosts to the specified host.

/NOPUBLIC maps only for the local host.

Not valid with SET NOARP.


Examples

#1

TCPIP> SET ARP AA-BB-04-05-06-07 CONDOR
      

Permanently maps CONDOR's host name to FDDI address AA-BB-04-05-06-07.


SET BOOTP

Creates client entries in the BOOTP database.

SET NOBOOTP does not require any qualifiers.

Related commands: CONVERT/VMS BOOTP, SHOW BOOTP


Format

SET [NO]BOOTP host
[ /FILE=file]
/HARDWARE=ADDRESS=hex_address
[ /GATEWAYS=hosts ]
[ /NETWORK_MASK=IP_address ]
[ /SERVERS=type=host ]
[ /TIME_OFFSET=seconds ]

restrictions

Requires read, write, and delete access to the BOOTP database.

Parameters

host

Required.

Specifies the client to which your system will download files upon request. Enter a host name or IP address.


Qualifiers

/FILE=file

Optional.

Specifies the name of the client's system image or other file to download upon request.

  • By default, upon receiving a request, BOOTP looks for this file in TCPIP$TFTP_ROOT:[host], where host is the client's host name, excluding the domain.
  • If this directory does not exist, BOOTP uses:


    TCPIP$TFTP_ROOT:[000000].
    
  • When the TCP/IP Services software receives a boot request, BOOTP verifies the existence and size of this file.

/GATEWAYS=hosts

/NOGATEWAYS=hosts

Optional. Default: None.

Specifies the gateways used for routing.

/HARDWARE=ADDRESS=hex_addr

Required.

Specifies the client's hardware address. For hex_addr, specify: hh-hh-hh-hh-hh-hh.

/NETWORK_MASK=IP_address

Required if you use subnets; otherwise optional.

Specifies the part of the host field of an IP address identified as the subnet.

The software calculates the default by setting the following:

  • The bits representing the network field to 1
  • The bits representing the host field to 0

You can divide the host field into a site-specific subnetwork and a host field. If you use subnets, you must specify a subnet field.

/SERVERS=type=host

Optional.

Specifies other servers whose names BOOTP can supply to clients. Here, host specifies a host name or IP address and type can be one or more of the following:

[NO]COOKIE Cookie server
[NO]IEN_NAME IEN-116 name server
[NO]IMPRESS Impress network image server (IMAGEN)
[NO]LPR Berkeley 4BSD print server
[NO]LOG MIT-LCS UDP logging server
[NO]NAME BIND name server
[NO]RESOURCE Resource Location Protocol
(RLP) server (RFC-887)
[NO]TIME Internet time server (RFC-868)

/TIME_OFFSET=seconds

Optional. Default: 0 seconds.

Specifies the time difference, in seconds, between the client's time zone and Universal Coordinated Time (UTC) expressed in seconds. This value is zero (0) in the British Isles and parts of Europe, a positive number for locations east of the zero meridian, and a negative number for locations west of the zero meridian.


Examples

#1

TCPIP> SET BOOTP PLOVER /HARDWARE=ADDRESS=08-00-2D-20-23-21 -
_TCPIP> /FILE=PLOVER.SYS
      

Adds client host PLOVER, with hardware address 08-00-2D-20-23-21 to the BOOTP database. BOOTP can respond to a remote boot request from client PLOVER with a reply packet containing the name of the file to down load and its IP address.

#2

TCPIP> SET BOOTP ERN /HARDWARE=ADDRESS=98-00-2D-20-23-21 -
_TCPIP> /SERVERS=COOKIE=(PLOVER,GULL)
      

Adds client host ERN to the BOOTP database and specifies that ERN will use PLOVER AND GULL as cookie servers.

#3

TCPIP> SET BOOTP  PLOVER /HARDWARE=ADDRESS=08-00-2D-20-23-21 -
_TCPIP> /SERVERS=(COOKIE=GULL,NAME=BIRDS)
      

Adds client host PLOVER to the BOOTP database and specifies that PLOVER will use GULL as a COOKIE server and BIRDS as its name server.


Previous Next Contents Index