 |
HP OpenVMS System Management Utilities Reference
Manual
MONITOR LOCK
The MONITOR LOCK command initiates monitoring of the LOCK class.
Format
MONITOR LOCK
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The LOCK class includes the following data items:
| Data Item |
Description |
|
New ENQ Rate
|
Rate of new lock (ENQ) requests (as opposed to conversions)
|
|
Converted ENQ Rate
|
Rate of lock (ENQ) conversion requests
|
|
DEQ Rate
|
Rate of unlock (DEQ) requests
|
|
Blocking AST Rate
|
Rate of lock manager blocking ASTs delivered
|
|
ENQs Forced To Wait Rate
|
Rate of occurrence of locks that could not be granted immediately, thus
causing a wait
|
|
ENQs Not Queued Rate
|
Rate of occurrence of locks that could not be granted immediately but
requested not to be queued, and thus received an error status instead
|
|
Deadlock Search Rate
|
Rate at which a deadlock search was performed
|
|
Deadlock Find Rate
|
Rate at which deadlocks were found
|
|
Total Locks
|
Total number of locks in the system
|
|
Total Resources
|
Total number of resources in the system
|
Example
|
MONITOR> MONITOR /RECORD IO
MONITOR> MONITOR /INPUT=LOCKSTATS.DAT/SUMMARY/NODISPLAY LOCK/AVERAGE
.
.
.
MONITOR> [Ctrl/Z]
$ TYPE MONITOR.SUM
OpenVMS Monitor Utility
+-----+ LOCK MANAGEMENT STATISTICS
| AVE | on node SAMPLE From: 29-APR-2003 08:00:00
+-----+ SUMMARY To: 29-APR-2003 17:00:00
0 5 10 15 20
+ - - - - + - - - - + - - - - + - - - - -+
New ENQ Rate 2 |****
Converted ENQ Rate 1 |**
| | | | |
DEQ Rate 3 |******
Blocking AST Rate |
| | | | |
ENQs Forced To Wait Rate |
ENQs Not Queued Rate |
| | | | |
Deadlock Search Rate |
Deadlock Find Rate |
| | | | |
Total Locks 3 |******
Total Resources 3 |******
| | | | |
+ - - - - + - - - - + - - - - + - - - - -+
PLAYBACK SUMMARIZING
|
|
This example shows the average use of the lock management subsystem
during a typical workday, based on data that was previously recorded.
MONITOR MODES
The MONITOR MODES command initiates monitoring of the MODES class,
which includes a data item for each mode of processor operation.
Format
MONITOR MODES
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CPU
/NOCPU [=(x[,...])] (default)
In multiprocessor configurations, selects the CPU-specific form of
output, where x specifies the CPU identification. If you
specify /CPU without specifying a CPU identification, MONITOR displays
MODES class statistics for each successive CPU until information for
all active CPUs has been displayed. MONITOR then repeats the cycle
beginning with the first CPU. If you specify one CPU identification,
MONITOR displays statistics for that CPU only. If you specify multiple
CPU identifications, MONITOR displays statistics for each successive
CPU specified, then repeats the cycle beginning with the first
specified CPU.
Note that if you specify multiple CPU identifications, MONITOR does not
notify you if one or more of the specified CPUs is unavailable. If all
of the CPU identifications that you specify do not exist, then MONITOR
will behave as if /CPU were specified without any arguments.
For multiprocessor systems, /NOCPU produces a single modes screen that
reflects the combined time that all CPUs spent in each mode.
For nonmultiprocessor systems, the /CPU qualifier displays the CPU ID;
/NOCPU does not display the CPU ID.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
/PERCENT
/NOPERCENT (default)
Controls whether statistics are expressed as percent values in display
and summary outputs. The [NO]PERCENT qualifier is applicable only to
the DISK, MODES, SCS, and STATES classes.
Description
The following data items, included in the MODES class, can be displayed
as percentages of all processor (CPU) time or as rates of clock ticks
(10 millisecond units) per second:
| Data Item |
Description |
|
Interrupt Stack (Interrupt State on Alpha and I64 systems)
|
Time spent on the interrupt stack (on VAX systems) or in an interrupt
state on a kernel stack (on Alpha and I64 systems).
|
|
MP Synchronization
|
Time spent synchronizing multiple CPUs (applicable to multiprocessor
systems only).
|
|
Kernel Mode
|
Time spent in kernel mode, but not in an interrupt state.
|
|
Executive Mode
|
Time spent in executive mode.
|
|
Supervisor Mode
|
Time spent in supervisor mode.
|
|
User Mode
|
Time spent in user mode executing instructions.
|
|
Compatibility Mode
|
Time spent executing compatibility mode instructions. (This data item
is meaningful only for VAX systems.)
|
|
Idle Time
|
Time not spent in any of the other modes.
|
For multiprocessor systems, when you enter the MONITOR MODES command
without using the /CPU qualifier to select specific CPUs, MONITOR
produces a single modes screen similar to those produced for
nonmultiprocessor systems. However, the statistics produced for
multiprocessor systems reflect the combined time that all CPUs spent in
each mode.
Examples
| #1 |
MONITOR> MONITOR MODES /PERCENT
OpenVMS Monitor Utility
TIME IN PROCESSOR MODES (%)
+-----+ on node SAMPLE
| CUR | 29-APR-2003 22:52:42
+-----+
0% 25% 50% 75% 100%
+ - - - - + - - - - + - - - - + - - - - -+
Interrupt Stack 4 |*
| | | | |
MP Synchronization |
| | | | |
Kernel Mode 6 |**
| | | | |
Executive Mode 2 |
| | | | |
Supervisor Mode |
| | | | |
User Mode 72 |***************************
| | | | |
Compatibility Mode |
| | | | |
Idle Time 16 |******
| | | | |
+ - - - - + - - - - + - - - - + - - - - -+
|
|
This display shows that, over the last collection interval, the
processor spent 72 percent of its time executing user code, 8 percent
executing system code to service user requests in executive and kernel
modes, and 4 percent processing interrupts on the interrupt stack. It
was idle 16 percent of the time. Time spent executing OpenVMS RMS code
is included in executive-mode time. Time spent executing DCL code is
included in supervisor-mode time.
If you omit the /PERCENT qualifier or specify /NOPERCENT, MONITOR
displays mode times as rates of clock ticks per second, where a clock
tick is 10 milliseconds. On a uniprocessor, the rate value is
equivalent to the percent value.
| #2 |
MONITOR> MONITOR MODES
OpenVMS Monitor Utility
+-----+ TIME IN PROCESSOR MODES
| CUR | on node SAMPLE
+-----+ 29-APR-2003 15:02:36
Combined for 2 (of 4) CPUs 0 50 100 150 200
+ - - - - + - - - - + - - - - + - - - - -+
Interrupt Stack |
| | | | |
MP Synchronization |
| | | | |
Kernel Mode 2 |*
| | | | |
Executive Mode 1 |*
| | | | |
Supervisor Mode |
| | | | |
User Mode 101 |********************
| | | | |
Compatibility Mode |
| | | | |
Idle Time 96 |******************
+ - - - - + - - - - + - - - - + - - - - -+
|
|
This example demonstrates output of the MONITOR MODES command for a
multiprocessor system. Displayed statistics represent rates of clock
ticks per second. Information in the upper left corner of the screen
indicates that node SAMPLE has four CPUs, two of which are active.
Because the command line does not include the /CPU qualifier,
statistics reflect the combined time that all CPUs spent in each mode.
MONITOR MSCP_SERVER
The MONITOR MSCP_SERVER command initiates monitoring of the mass
storage control protocol (MSCP) server class.
Format
MONITOR MSCP_SERVER
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The MSCP server class consists of the following data items that can be
useful in tuning the MSCP server:
| Data Item |
Description |
|
Server I/O Request Rate
|
The rate at which remote processors request I/O transfers.
|
|
Read Request Rate
|
The rate at which remote processors request Read I/O transfers.
|
|
Write Request Rate
|
The rate at which remote processors request Write I/O transfers.
|
|
Extra Fragment Rate
|
The rate at which the server issues extra fragments. One or more extra
fragments are created when, due to buffering constraints, the MSCP
server issues multiple I/Os in order to fulfill a single I/O request.
For example, if the MSCP server breaks up a 64-block request into 4
fragments of 16 blocks, 3 extra fragments are created.
|
|
Fragmented Request Rate
|
The rate at which fragmented requests occur. A fragmented request is a
transfer request that the server fragments due to buffering
constraints. For example, one fragmented request occurs when the server
splits a 36-block request into 3 fragments of 16 blocks, 16 blocks, and
4 blocks. In this example, the server creates two extra fragments.
|
|
Buffer Wait Rate
|
The rate at which "buffer waits" occur in the server. A
buffer wait occurs when a request must wait for MSCP buffer memory.
|
|
Request Size Rates
|
A histogram that displays the rate of requests for various block sizes.
|
Example
|
MONITOR> MONITOR MSCP_SERVER
OpenVMS Monitor Utility
MSCP SERVER STATISTICS
on node GLOBBO
29-APR-2003 09:51:43
CUR AVE MIN MAX
Server I/O Request Rate 0.00 0.71 0.00 6.22
Read Request Rate 0.00 0.54 0.00 6.22
Write Request Rate 0.00 0.16 0.00 6.16
Extra Fragment Rate 0.00 0.00 0.00 0.00
Fragmented Request Rate 0.00 0.00 0.00 0.00
Buffer Wait Rate 0.00 0.00 0.00 0.00
Request Size Rates 1 0.00 0.07 0.00 0.98
(Blocks) 2-3 0.00 0.03 0.00 0.65
4-7 0.00 0.03 0.00 0.65
8-15 0.00 0.10 0.00 1.63
16-31 0.00 0.46 0.00 5.51
32-63 0.00 0.00 0.00 0.00
64+ 0.00 0.00 0.00 0.00
|
|
This example demonstrates use of the MONITOR MSCP_SERVER command to
generate MSCP statistics on node GLOBBO.
MONITOR PAGE
The MONITOR PAGE command initiates monitoring of the PAGE class.
Format
MONITOR PAGE
Command Qualifiers
/qualifier[,...]
One or more qualifiers as described in the Command Qualifier
Descriptions section.
Classname Qualifiers
/ALL
Specifies that a table of all available statistics (current, average,
minimum, and maximum) is to be included in the display and summary
output. For summary output, this qualifier is the default for all
classes; otherwise, it is the default for all classes except CLUSTER,
MODES, PROCESSES, STATES, SYSTEM, and VECTOR.
/AVERAGE
Specifies that a bar graph of average statistics is to be included in
the display and summary outputs.
/CURRENT
Specifies that a bar graph of current statistics is to be included in
the display and summary outputs. The /CURRENT qualifier is the default
for the CLUSTER, MODES, STATES, SYSTEM, and VECTOR classes.
/MAXIMUM
Specifies that a bar graph of maximum statistics is to be included in
the display and summary outputs.
/MINIMUM
Specifies that a bar graph of minimum statistics is to be included in
the display and summary outputs.
Description
The PAGE class includes the following data items:
| Data Item |
Description |
|
Page Fault Rate
|
Rate of page faults for all working sets
|
|
Page Read Rate
|
Rate of pages read from disk as a result of page faults
|
|
Page Read I/O Rate
|
Rate of read I/O operations from disk as a result of page faults
|
|
Page Write Rate
|
Rate at which pages were written to the page file
|
|
Page Write I/O Rate
|
Rate of write I/O operations to the page file
|
|
Free List Fault Rate
|
Rate at which pages were read from the free-page list as a result of
page faults
|
|
Modified List Fault Rate
|
Rate of pages read from the modified-page list as a result of page
faults
|
|
Demand Zero Fault Rate
|
Rate at which zero-filled pages were allocated as a result of page
faults
|
|
Global Valid Fault Rate
|
Rate of page faults for pages that are not in the process's working
set, but are in physical memory and are indicated as valid pages in the
systemwide global page tables
|
|
Writes In Progress Fault Rate
|
Rate of pages read that were in the process of being written back to
disk when faulted
|
|
System Fault Rate
|
Rate of page faults for pages in system space
|
|
Free List Size
|
Number of pages on the free-page list
|
|
Modified List Size
|
Number of pages on the modified-page list
|
Example
|
MONITOR> MONITOR PAGE
OpenVMS Monitor Utility
PAGE MANAGEMENT STATISTICS
on node SAMPLE
29-APR-2003 22:22:44
CUR AVE MIN MAX
Page Fault Rate 26.82 18.27 9.66 26.82
Page Read Rate 3.97 2.65 1.33 3.97
Page Read I/O Rate 1.32 0.99 0.66 1.32
Page Write Rate 0.00 0.00 0.00 0.00
Page Write I/O Rate 0.00 0.00 0.00 0.00
Free List Fault Rate 13.90 10.96 8.00 13.90
Modified List Fault Rate 5.62 2.99 0.33 5.62
Demand Zero Fault Rate 4.63 2.65 0.66 4.63
Global Valid Fault Rate 1.32 0.66 0.00 1.32
Wrt In Progress Fault Rate 0.00 0.00 0.00 0.00
System Fault Rate 2.31 1.99 1.66 2.31
Free List Size 3164.00 3176.00 3164.00 3188.00
Modified List Size 155.00 131.00 107.00 155.00
|
|
This example shows that the current rate of pages read per read I/O
operation is approximately 3 per second (Page Read Rate divided by Page
Read I/O Rate). Note that while the page fault rate is currently at the
highest point of the monitoring session, the majority of the pages are
faulted from memory, not from disk.
|
