After AUTOGEN finishes, the system automatically shuts down,
displaying messages similar to the following:
The system will automatically reboot after the shutdown and the
installation will be complete.
SHUTDOWN -- Perform an Orderly System Shutdown
on node ALPCSI
%SHUTDOWN-I-BOOTCHECK, performing reboot consistency check...
%SHUTDOWN-I-CHECKOK, basic reboot consistency check completed
.
.
.
The OpenVMS Alpha system should automatically reboot after
the shutdown; the installation will be complete. However, if the
Alpha system does not reboot automatically, reboot the system manually.
For example, if the system disk is on an RZ25 disk drive with a
unit number of 1, enter the following command and press Return:
>>>BOOT DKA1
When the system starts booting, a message similar to the following
is displayed:
OpenVMS (TM) Alpha Operating System, Version 8.2
Copyright (c) 1976-2004 Hewlett-Packard Development Company, L.P.
%STDRV-I-STARTUP, OpenVMS startup begun at 27-AUG-2004 14:50:18.35
.
.
.
When the system reboots, it displays informational messages
and accounting information indicating that your OpenVMS Alpha operating
system has finished booting and is now ready for use. For example:
%SET-I-INTSET, login interactive limit = 64, current interactive value = 0
SYSTEM job terminated at 27-AUG-2004 14:51:23.47
Accounting information:
Buffered I/O count: 2177 Peak working set size: 6848
Direct I/O count: 1358 Peak page file size: 179552
Page faults: 1805 Mounted volumes: 0
Charged CPU time: 0 00:00:13.37 Elapsed time: 0 00:01:06.20
HP OpenVMS Version 8.2 Upgrade and Installation... 
Installing the OpenVMS Operating System
