 |
OpenVMS/Hangul RTL Korean Screen Management (SMG$)
Manual
SMG$REPLACE_INPUT_LINE
The Replace Input Line routine replaces the specified lines in the
recall buffer with the specified string.
Format
SMG$REPLACE_INPUT_LINE keyboard-id [,replace-string] [,line-count]
[,flags] [,character-set]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
keyboard-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Keyboard identifier. The keyboard-id argument is the
address of an unsigned longword containing the identifier of the
virtual keyboard from which to read.
You create a virtual keyboard by calling the
SMG$CREATE_VIRTUAL_KEYBOARD routine.
replace-string
| OpenVMS usage |
char_string |
| type |
character string |
| access |
read only |
| mechanism |
by descriptor |
String that contains the line to be entered into the recall buffer. The
replace-string argument is the address of a descriptor
pointing to this string. The default is a null string, which removes
the last line entered.
line-count
| OpenVMS usage |
byte_unsigned |
| type |
byte (unsigned) |
| access |
read only |
| mechanism |
by reference |
Number of lines to be replaced. The line-count
argument is the address of an unsigned byte containing the number of
lines to be replaced with replace-string. The default
value for the line-count argument is 1 (the last line
entered).
flags
| OpenVMS usage |
mask_longword |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies optional behavior. The flags argument is the
address of an unsigned longword that contains the flag. Valid values
are as follows:
|
SMG$M_KEEP_CONTENTS
|
The string specified by
replace-string replaces the existing string specified
by
line-count. By using this flag in a loop, the line
recall buffer can be preloaded with information by the application.
|
character-set
| OpenVMS usage |
longword_unsigned |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Character set specifier. The optional character-set
argument is the address of an unsigned longword that specifies the
character set for the replace-string. If this argument
is omitted, the default character set value is UNKNOWN.
| Value |
Character Set |
|
SMG$C_ASCII
|
ASCII
|
|
SMG$C_SPEC_GRAPHICS
|
DEC Special Graphics
|
|
SMG$C_HANGUL
|
DEC Hangul
|
1One of DEC supplemental character set and Latin-1 character
set.
Description
SMG$REPLACE_INPUT_LINE replaces the requested lines in the recall
buffer with the specified string. The remaining
(line-count--1) lines are deleted. This routine is
intended to aid in processing line continuations.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVKBD_ID
|
Invalid
keyboard-id.
|
|
SMG$_WRONUMARG
|
Wrong number of arguments.
|
|
LIB$_INSVIRMEM
|
Insufficient virtual memory.
|
Example
|
!+
! This FORTRAN example uses the routine
! SMG$REPLACE_INPUT_LINE to concatenate
! the last 2 lines in the recall buffer.
!-
IMPLICIT INTEGER (A-Z)
INCLUDE '($SMGDEF)'
INCLUDE '($SMGMSG)'
CHARACTER*20 TEXT, TEXT1
WRITE (5,*) 'Enter number of lines to save.'
READ (5,*) R
S = SMG$CREATE_PASTEBOARD(PBID)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$CREATE_VIRTUAL_DISPLAY(22,70,DID,SMG$M_BORDER)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$CREATE_VIRTUAL_KEYBOARD(KBID,,,,R)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PUT_LINE(DID,'Enter lines of text:')
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PASTE_VIRTUAL_DISPLAY(DID,PBID,2,2)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
!+
! Read in lines of text.
!-
DO 10 I = 1,R
S = SMG$READ_COMPOSED_LINE(KBID,,TEXT,'Example>',,DID)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
10 CONTINUE
!+
! Recall last 2 lines in the buffer.
!-
S = SMG$RETURN_INPUT_LINE(KBID,TEXT,,1,LEN)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$RETURN_INPUT_LINE(KBID,TEXT1,,2,LEN1)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
TEXT(LEN:20) = TEXT1(1:LEN1)
!+
! Concatenate them and replace the last 2
! lines in the buffer with the new line.
!-
S = SMG$REPLACE_INPUT_LINE(KBID,TEXT,2)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
!+
! Recall the last line which is now the
! concatenated line.
!-
S = SMG$RETURN_INPUT_LINE(KBID,TEXT,,1)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PUT_LINE(DID,'**** The last line of text is:')
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PUT_LINE(DID,TEXT)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
END
|
One sample of the output generated by this FORTRAN program is as
follows:
$ RUN REPLACE
Enter number of lines to save.
3
Enter lines of text:
Example> PASTEBOARD
Example> DISPLAY
Example> KEYBOARD
****The last line of text is:
KEYBOARDDISPLAY
|
SMG$RESTORE_PHYSICAL_SCREEN
The Restore Physical Pasteboard routine rewrites the pasteboard image
as it was at the time the SMG$SAVE_PHYSICAL_SCREEN routine was called.
Format
SMG$RESTORE_PHYSICAL_SCREEN pasteboard-id ,display-id
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
pasteboard-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the pasteboard to be restored. The
pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
Pasteboard-id is returned by the SMG$CREATE_PASTEBOARD
routine.
display-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the virtual display created by the SMG$SAVE_PHYSICAL_SCREEN
routine. The display-id argument is the address of an
unsigned longword that contains this display identifier.
Description
SMG$RESTORE_PHYSICAL_SCREEN reproduces the pasteboard image saved by
the SMG$SAVE_PHYSICAL_SCREEN routine. You must pass the
display-id returned by the SMG$SAVE_PHYSICAL_SCREEN
routine to the SMG$RESTORE_PHYSICAL_SCREEN routine. Note that when
performing multiple calls to SMG$SAVE_PHYSICAL_SCREEN and
SMG$RESTORE_PHYSICAL_SCREEN, the calls must be performed in a nested
fashion; that is, the last pasteboard saved must be the first one
restored.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVDIS_ID
|
Invalid
display-id.
|
|
SMG$_INVPAS_ID
|
Invalid
pasteboard-id.
|
SMG$RETURN_CURSOR_POS
The Return Cursor Position routine returns the current virtual cursor
position in a specified virtual display.
Format
SMG$RETURN_CURSOR_POS display-id ,start-row ,start-column
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
display-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the virtual display whose current virtual cursor position you
are requesting. The display-id argument is the address
of an unsigned longword that contains the display identifier.
Display-id is returned by SMG$CREATE_VIRTUAL_DISPLAY.
start-row
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Receives the virtual cursor's current row position within the specified
virtual display. The start-row argument is the address
of a signed longword into which is written the current row position.
start-column
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Receives the virtual cursor's current column position within the
specified virtual display. The start-column argument
is the address of a signed longword into which is written the current
column position.
Description
SMG$RETURN_CURSOR_POS returns the virtual cursor's current row and
column positions in a specified virtual display.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVDIS_ID
|
Invalid
display-id.
|
|
SMG$_WRONUMARG
|
Wrong number of arguments.
|
SMG$RETURN_INPUT_LINE
The Return Input Line routine returns to the caller the requested line
from the recall buffer. This line is retrieved either by matching it
with a specified string or by specifying the appropriate line number.
Format
SMG$RETURN_INPUT_LINE keyboard-id ,resultant-string [,match-string]
[,byte-integer-line-number] [,resultant-length] [,character-set]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
keyboard-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Keyboard identifier. The keyboard-id argument is the
address of an unsigned longword containing the identifier of the
virtual keyboard from which to read.
The virtual keyboard is created by calling the
SMG$CREATE_VIRTUAL_KEYBOARD routine.
resultant-string
| OpenVMS usage |
char_string |
| type |
character string |
| access |
write only |
| mechanism |
by descriptor |
String into which is written the complete recalled line. The
resultant-string argument is the address of a
descriptor pointing to this string.
match-string
| OpenVMS usage |
char_string |
| type |
character string |
| access |
read only |
| mechanism |
by descriptor |
Match string to be used when searching for the line to be recalled. The
optional match-string argument is the address of a
descriptor pointing to this match string. The search begins with the
last line typed.
byte-integer-line-number
| OpenVMS usage |
byte_unsigned |
| type |
byte (unsigned) |
| access |
read only |
| mechanism |
by reference |
Line number to be used when searching for the line to be recalled. The
optional byte-integer-line-number argument is the
address of an unsigned byte containing the number of the line to be
recalled. The last line typed is line number 1.
resultant-length
| OpenVMS usage |
word_unsigned |
| type |
word (unsigned) |
| access |
write only |
| mechanism |
by reference |
Length of the resultant-string string. The optional
resultant-length argument is the address of an
unsigned word containing either the number of characters read or the
maximum length of resultant-string, whichever is less.
character-set
| OpenVMS usage |
longword_unsigned |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by reference |
Receives the default character set for the requested line from the
recall buffer. The optional character-set argument is
the address of an unsigned longword that specifies the character set.
If the character set is undefined, receives SMG$C_UNKNOWN.
| Value |
Character Set |
|
SMG$C_ASCII
|
ASCII
|
|
SMG$C_SPEC_GRAPHICS
|
DEC Special Graphics
|
|
SMG$C_HANGUL
|
DEC Hangul
|
|
SMG$C_UNKNOWN
|
Unknown character set
|
1One of DEC supplemental character set and Latin-1 character
set.
Description
SMG$RETURN_INPUT_LINE returns to the caller the specified line in the
recall buffer. This routine is intended to aid in the implementation of
a DCL-style "RECALL" command.
If you specify the match-string argument,
SMG$RETURN_INPUT_LINE searches for and returns the line that matches
the specified string. If you specify the
byte-integer-line-number argument,
SMG$RETURN_INPUT_LINE returns the line that corresponds to the
specified line number. If you specify both
match-string and
byte-integer-line-number, SMG$_INVARG is returned. If
you specify match-string and a match is not made,
SMG$_LINNOTFND is returned.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVARG
|
Invalid argument.
|
|
SMG$_INVKBD_ID
|
Invalid
keyboard-id.
|
|
SMG$_LINNOTFND
|
Matching line was not found.
|
|
SMG$_WRONUMARG
|
Wrong number of arguments.
|
|
LIB$_xxx
|
Any error from LIB$COPY_R_DX.
|
Example
|
!+
! This FORTRAN example uses the routine
! SMG$RETURN_INPUT_LINE to implement a
! RECALL/ALL command.
!-
IMPLICIT INTEGER (A-Z)
INCLUDE '($SMGDEF)'
INCLUDE '($SMGMSG)'
CHARACTER*20 TEXT
WRITE (5,*) 'Enter number of lines to save.'
READ (5,*) R
S = SMG$CREATE_PASTEBOARD(PBID)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$CREATE_VIRTUAL_DISPLAY(22,70,DID,SMG$M_BORDER)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$CREATE_VIRTUAL_KEYBOARD(KBID,,,,R)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PUT_LINE(DID,'Enter lines of text:')
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PASTE_VIRTUAL_DISPLAY(DID,PBID,2,2)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
!+
! Read in lines of text.
!-
DO 10 I = 1,R
S = SMG$READ_COMPOSED_LINE(KBID,,TEXT,'Example>',,DID)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
10 CONTINUE
S = SMG$PUT_LINE(DID,'**** The lines of text are:')
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
!+
! Recall all lines in the buffer.
!-
DO 30 N = 1,R
S = SMG$RETURN_INPUT_LINE(KBID,TEXT,,N)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$PUT_LINE(DID,TEXT)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
30 CONTINUE
!+
! Recall the line containing 'fox'
!-
S = SMG$PUT_LINE(DID,'**** The line containing "fox" is:',2)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
S = SMG$RETURN_INPUT_LINE(KBID,TEXT,'FOX')
IF (S .EQ. SMG$_LINNOTFND) TEXT = 'None found!'
S = SMG$PUT_LINE(DID,TEXT)
IF (.NOT. S) CALL LIB$STOP(%VAL(S))
END
|
One sample of the output generated by this FORTRAN program is as
follows:
$ RUN RETURN
Enter number of lines to save.
3
Enter lines of text:
Example> PASTEBOARD
Example> DISPLAY
Example> KEYBOARD
****The lines of text are:
KEYBOARD
DISPLAY
PASTEBOARD
****The line containing "fox" is:
None found!
|
|
