# SSH CONFIGURATION FILE FORMAT VERSION 1.1
# REGEX-SYNTAX egrep
# end of metaconfig
# (do not change above lines!)
#
# File name: SSHD2_CONFIG.
# Product: HP TCP/IP Services for OpenVMS
# Version: T5.6-3D
#
# Copyright 1976, 2005 Hewlett-Packard Development Company, L.P.
#
#
# ssh 3.2 server configuration file
#
## General
HostKeyFile hostkey
PublicHostKeyFile hostkey.pub
RandomSeedFile random_seed
# BannerMessageFile /etc/ssh2/ssh_banner_message
# BannerMessageFile /etc/issue.net
# SftpSyslogFacility LOCAL7
SyslogFacility AUTH
# SyslogFacility LOCAL7
# QuietMode no
VerboseMode no
## Network
Port 22
ListenAddress any
RequireReverseMapping no
# ResolveClientHostName yes
MaxBroadcastsPerSecond 0
# MaxBroadcastsPerSecond 1
# NoDelay no
# KeepAlive yes
# MaxConnections 50
# MaxConnections 0
# 0 == number of connections not limited
## Crypto
Ciphers AnyCipher
# Ciphers AnyStdCipher
# Ciphers 3des
# Following includes "none" 'cipher':
# Ciphers AnyStd
MACs AnyMAC
# MACs AnyStdMAC
# Following includes "none" 'mac':
# MACs AnyStd
# RekeyIntervalSeconds 3600
## User
CheckMail yes
PrintMotd yes
# StrictModes yes
# Specifies 1 hour
# (you can also use 'w' for week, 'd' for day, 'm' for minute, 's' for seconds)
# IdleTimeOut 1h
# without specifier, the default number is in seconds
# IdleTimeOut 3600
UserConfigDirectory "%Dssh2"
# UserConfigDirectory "/etc/ssh2/auth/%U"
AuthorizationFile authorization
# This variable is set here, because by default it's empty, and so no
# variables can be set. Because of that, we set a few common ones here.
SettableEnvironmentVars LANG,LC_(ALL|COLLATE|CTYPE|MONETARY|NUMERIC|TIME),PATH,TERM,TZ
## Tunneling
AllowX11Forwarding yes
AllowTcpForwarding yes
# AllowTcpForwardingForUsers sjl, cowboyneal@slashdot\.org
# DenyTcpForwardingForUsers 2[[:digit:]]*4,peelo
# AllowTcpForwardingForGroups privileged_tcp_forwarders
# DenyTcpForwardingForGroups coming_from_outside
# Local port forwardings to host 10.1.0.25 ports 143 and 25 are
# allowed for all users in group users.
# Note that forwardings using the name of this host will be allowed (if
# it can be resolved from the DNS).
# ForwardACL allow local .*%users \i10\.1\.0\.25%(143|25)
# Local port forwardings requested exactly to host proxy.company.com
# port 8080 are allowed for users that have 's' as first character
# and belong to the group with group id 10:
# ForwardACL allow local s.*%10 proxy\.company\.com%8080
# Remote port forwarding is denied for all users to all hosts:
# ForwardACL deny remote .* .*
## Authentication
## hostbased, publickey and password are allowed by default
# AllowedAuthentications hostbased, publickey, password
# AllowedAuthentications publickey
AllowedAuthentications gssapi-with-mic, kerberos-tgt-2@ssh.com, kerberos-2@ssh.com, publickey, password
# Requireduthentications publickey, password
# LoginGraceTime 600
# AuthInteractiveFailureTimeout 2
# HostbasedAuthForceClientHostnameDNSMatch no
# UserKnownHosts yes
#
# AuthPublicKey.MaxSize 0
# AuthPublicKey.MinSize 0
AllowAgentForwarding yes
# AuthKbdInt.NumOptional 0
# AuthKbdInt.Optional pam, password
# AuthKbdInt.Required password
# AuthKbdInt.Retries 3
# PermitEmptyPasswords no
PasswordGuesses 3
## Host restrictions
AllowHosts localhost, *
## Next one matches with, for example, taulu.foobar.com, tuoli.com, but
## not tuoli1.com. Note that you have to input string "\." when you want it
## to match only a literal dot. You also have to escape "," when you
## want to use it in the pattern, because otherwise it is considered a list
## separator.
## AllowHosts t..l.\..*
## The following matches any numerical IP-address (yes, it is cumbersome)
## AllowHosts ([[:digit:]]{1\,3}\.){3}[[:digit:]]{1\,3}
## Same thing is achieved with using the special prefix "\i" in a
## pattern. This means that the pattern is only used to match
# IP-addresses. Using the above example:
#
# AllowHosts \i.*
#
# You can probably see the difference between the two.
#
# Also, you can use subnet masks, by using prefix "\m"
#
# AllowHosts \m127.0/8
#
# AllowHosts \m127.0.0.0/24
#
# would match localhost ("127.0.0.1").
#
# DenyHosts evil\.org, aol\.com
# AllowSHosts trusted\.host\.org
# DenySHosts not\.quite\.trusted\.org
# IgnoreRhosts no
# IgnoreRootRHosts no
#
# (the above, if not set, is defaulted to the value of IgnoreRHosts)
## User restrictions
# AllowUsers sj.*,s[[:digit:]]*,s(jl|amza)
# DenyUsers skuuppa,warezdude,31373
# DenyUsers don@untrusted\.org
# AllowGroups staff,users
# DenyGroups guest,anonymous
PermitRootLogin yes
# PermitRootLogin nopwd
## Chrooted environment
# ChRootGroups sftp,guest
# ChRootUsers anonymous,ftp,guest
## SSH1 compatibility
# Ssh1Compatibility no
# Sshd1Path <set by configure by default>
# This is given as argument to sshd1 with "-f" if sshd2 is invoked
# with "-f", otherwise the default configuration for sshd1 is used.
# Sshd1ConfigFile /etc/sshd_config_alternate
## Subsystem definitions
# Subsystems don't have defaults, so this is needed here (uncommented).
subsystem-sftp /sys$system/tcpip$ssh_sftp-server2
# Also internal sftp-server subsystem can be used.
# subsystem-sftp internal://tcpip$ssh_sftp-server2
## Subconfiguration
# There are no default subconfiguration files. When specified the last
# obtained keyword value will prevail. Note that the host specific files
# are read before the user specific files.
# Following matches (from) any host
#
# HostSpecificConfig .* /etc/ssh2/subconfig/host_ext.example
#
# Following matches to subnet mask:
#
# HostSpecificConfig \m192.168.0.0/16 /etc/ssh2/subconfig/host_int.example
#
# Following matches to users from ssh.com that have two character long
# username or is sjl and belong to group wheel or wheel[0-9]
# UserSpecificConfig (..|sjl)%wheel[[:digit:]]?@ssh\.com /etc/ssh2/subconfig/user.example
# Following matches to the user anonymous from any host
# UserSpecificConfig anonymous@.* /etc/ssh2/subconfig/anonymous.example
## OpenVMS auditing and access control
# AllowVmsLoginWithExpiredPw no
# AllowNonvmsLoginWithExpiredPw no
# UserLoginLimit -1
#
# V5.5-02 Change pubkey to publickey
AccountingAuthentications kerberos-tgt-2@ssh.com, kerberos-2@ssh.com, publickey, password ,hostbased
IntrusionAuthentications kerberos-tgt-2@ssh.com, kerberos-2@ssh.com, publickey, password ,hostbased
# IntrusionIdentMethod publickey,password,hostbased
# IntrusionIdentSsh publickey,password,hostbased
LogfailAuthentications kerberos-tgt-2@ssh.com, kerberos-2@ssh.com, publickey, password ,hostbased
# PubkeyPassphraseGuesses 3
GssapiSendError yes
GssapiSendErrtok yes
|
