HP OpenVMS Systems

Extra Formfeeds wanted on HP Printer...

» close window

The Question is:

 
I've got a HP DeskJet 550C attached to a HP JetDirect EX Plus print server,
which is set up with its own IP address.  For some reason, the printer does
not print a form feed at the end of the print job, so the last page has to
be ejected.  Here's the vers
ion information:
  Digital TCP/IP Services for OpenVMS Alpha Version V4.1
  on a AlphaServer 1000A 5/400 running OpenVMS V7.1
 
Here's the SYS$SPECIFIC:[UCX_LPD]UCX$PRINTCAP.DAT:
 
# LOCAL PRINTERS
 
UCX$LPD_QUEUE:\
        :lp=UCX$LPD_QUEUE:\
        :sd=UCX$LPD_SPOOL:
 
HPDJ1_QUEUE|hpdj1_queue|HPDJ1_QUEUE:\
        :lf=/SYS$SPECIFIC/UCX_LPD/HPDJ1_QUEUE.LOG:\
        :lp=HPDJ1_QUEUE:\
        :rm=hpdj1.mycompany.com:\
        :rp=text:\
        :sd=/SYS$SPECIFIC/UCX_LPD/HPDJ1_QUEUE:\
        :fo=1:
 
 
Finally, here's the queue definition:
Server queue HPDJ1_QUEUE, idle, on MYCO::"hpdj1.mycompany.com",
mounted form DEFAULT
  /AUTOSTART_ON=(MYCO::"hpdj1.ckfinc.com") /BASE_PRIORITY=4 /DEFAULT=(FEED,
  FORM=DEFAULT) /OWNER=[SYSTEM] /PROCESSOR=UCX$LPD_SMB
  /PROTECTION=(S:M,O:D,G:R,W:S) /SEPARATE=(RESET=(RESET))
 
Any ideas?  It works if I set the JetDirect to print a trailing banner page,
which forces the form feed.  However, that would be a big waste of paper
here, where we print a lot of one page jobs.
 
Thanks.
 

The Answer is :

 
  First, acquire and install a more recent version of TCP/IP Services,
  move to V4.2 with the current ECO or (better) V5.0.
 
  Then look at previous discussions of the device control library,
  specifically looking at what would be required to create such a
  library (SYSDEVCTL.TLB) if necessary, and what printer command
  sequence would be needed to be generated at the end of the job
  or as part of the printer reset module -- the current print queue
  definition does declare the use of a reset module, what is in it?
 
  If you are unable to resolve this from other discussions here in
  Ask the Wizard and from the above suggestions, please contact the
  Compaq Customer Support Center directly.
 

  

     

     
answer written or last revised on ( 23-JUN-1999 )
     
» close window