HP OpenVMS Systems

OpenVMS on Unsupported Systems?

» close window

The Question is:

 
I am wondering if it is possible to install and successfully run OpenVMS
v7.2 on an Alpha XL 300 Workstation?
 
It seems these workstations were designed to run WinNT from their product
description on the Compaq site. I did not find this model mentioned in the
SPD  (SP2501hm.htm) for OpenVMS. The SPD did not have a specific list of
what models "could" work with Ope
nVMS. There was a list of "supported" systems. I guess I am confused about
whether Alpha CPU machines are generic in their support of operating
systems. It seems I can run several different OS's on an Intel platform, but
OpenVMS is restricted to certain t
ypes of Alpha CPU systems. Can you clarify? I would appreciate any
information or pointers to documents that might explain this.
 
 

The Answer is :

 
  The Alpha XL series, and the other Windows NT Alpha systems are
  not supported by OpenVMS.  You may or may not be able to get these
  systems to boot OpenVMS -- the closer the particular system is to
  an existing and supported system, the better your changes of getting
  it to work.
 
  All current PC systems are directly descended from the design of
  the IBM PC, its processor, its supported buses, its BIOS, and such.
  For many years, the term "clone" was used to indicate how compatible
  a particular system was with the original IBM PC.  Arguably, there
  have been a relatively minimal number of changes made to the hardware
  platform since the original IBM PC first shipped back in the early
  1980s -- newer generations of chips, the addition of PCI and USB,
  etc.  The internal system architecture and key components such as
  the BIOS interface are still extremely similar to the original...
 
  OpenVMS and particularly the Alpha and VAX platforms do not follow
  this "clone" model as closely, prefering to have the benefits that
  can result from various low-level differences -- while the application
  environment is quite compatible across the product line, changes in
  the I/O subsystem, the devices configured and configurable, the buses,
  the system console, and similar are quite common.  It is these changes
  that must be reflected in the operating system, and these changes are
  what permit the improvements in the systems, and the flexibility to
  balance the system price, system performance, and system features.
 
  Recent OpenVMS releases (V7.1-1H2 and V7.1-2) provide the ability to
  perform third-party bootstraps, but this requires detailed knowledge
  of the platform and of OpenVMS -- much like the creation of the
  floppies used to add support for devices in the PC space.
 
  For an idea of what one of these third-party bootstraps look like
  and what they can contain, please see the files that were included
  with the Multia OpenVMS kit that is available at the OpenVMS Freeware
  website -- these are the basic pieces, and additional changes may be
  required.  (The Multia kit, for instance, does not include the pieces
  necessary to use the PCMCIA or serial lines under OpenVMS.)
 
  For the details of the low-level differences between systems and the
  affected OpenVMS components, please see the oft-cited Internals and
  Data Structures Manual.
 

  

     

     
answer written or last revised on ( 4-NOV-1999 )
     
» close window