HP OpenVMS Systems

Connect to Network Object Rejected?

» close window

The Question is:

 
I have several printers setup on a Linksys 3xps 3 port printer server.  The
 ports on the print server are 172.17.1.114:4010 for parallel port 1,
 172.17.1.114:4020 for parallel port 2, and 172.17.1.114:4030 for parallel port
 3.  I am using tcpip$telnetsym
to print to these printers via queues with the init /que
 /processor=tcpip$telnetsym /on="172.17.1.114:410" day1 command.  One print job
 will print and then the queue will go into a stalled state.  If I then
 stop/reset/que DAY1 and then start/que DAY1 I ge
t the above message.  The only way I can correct the situation is to cycle
 power to the print server and then stop/reset/que and then restart.   I can
 not find a reference to the above error message and the documentation on
 telnetsym has pretty much nil t
roubleshooting.  Any help would be greatly appreciated.
 
 

The Answer is :

 
  Please see topic (1020), as well as existing Ask The Wizard
  discussions of the network object rejection in conjunction
  with IP printing.
 

  

     

     
answer written or last revised on ( 7-JUN-2002 )
     
» close window