The following sections describe the remaining steps that you
need to perform to complete the upgrade.
Choosing Descriptive
Help Text The system next prompts you as follows:
The installation operation can provide brief or detailed descriptions.
In either case, you can request the detailed descriptions by typing "?".
Do you always want detailed descriptions? (Yes/No) [No]
If you answer YES, the system will display additional explanatory
text with each prompt.
Saving Archived Files By default, the OpenVMS upgrade deletes files that were archived
as filename.extension_OLD by OpenVMS remedial kits. If you do not want to delete
these files, you can save them by taking one of the following steps:
When the script
asks if you want the defaults for all options, answer NO. (This
script is shown in the example in
Selecting Components.) Step through the options and deselect the
option to delete files archived by remedial kits. This will save
all such files.
Before beginning the upgrade, rename any _OLD files
that you want to save. Files that you do not rename will be deleted.
Note that the upgrade will not delete all files with an extension
ending in _OLD. Only those _OLD files that were archived by OpenVMS
remedial kits will be deleted.
OpenVMS patches save these _OLD files in VMS$REMEDIAL_OLD_FILES.TXT.
All files listed in this file are supposed to have the _OLD extension
appended to their names; however, some patch kits have added the
files without this extension. If the upgrade procedure detects files
without the appended _OLD extension, it will display a message similar
to the following:
%UPGRADE-I-FIXUP, appending _OLD to file names in PCSI$DESTINATION:[SYSUPD] VMS$REMEDIAL_OLD_FILES.TXT
[SYSUPD]VMSKITBLD.DAT
[SYSHLP]XFC$SDA.HLP
[SYS$LDR]SYSTEM_SYNCHRONIZATION.EXE-OLD
[SYS$LDR]SYS$XFCACHE.DSF
[SYS$LDR]SHELL9K.EXE_STB
[000000]DEC-AXPVMS-VMS-V0703-1-2.PCSI$DESCRIPTION
Selecting Components As you begin the upgrade procedure, the system asks if you
want all the default values, meaning all the files and subgroups
of files for each component included in the operating system. The
display is similar to the following:
The following product has been selected:
DEC AXPVMS OPENVMS V7.3-2 Platform (product suite)
Configuration phase starting ...
You will be asked to choose options, if any, for each selected product and
for any products that may be installed to satisfy software dependency
requirements.
DEC AXPVMS OPENVMS V7.3-2: OPENVMS and related products Platform
COPYRIGHT 1976, 27-JUN-2003
Hewlett-Packard Development Company, L.P.
Do you want the defaults for all options? [YES]YES
CDSA for OpenVMS Alpha (required part of OpenVMS)
KERBEROS for OpenVMS Alpha (required part of OpenVMS)
DEC AXPVMS DWMOTIF V1.3-1: DECwindows Motif
If a Local Language Variant is installed, refer to the Installation
Guide.
Do you want to continue? [YES]
During an upgrade, the POLYCENTER Software Installation utility
defines "default values" as the values that you
selected when you last installed or upgraded the OpenVMS Alpha operating
system on your system. Therefore, before you respond to the prompt,
note the following:
If you answer YES (by pressing the
Return key) to accept the default values, you will receive the same components
that you selected when you last installed or upgraded the system
(instead of all the components currently available)
plus any new components that were not in the previous version of
the OpenVMS Alpha operating system.
If you want to include or exclude any components
differently from the last installation or upgrade, you must answer
NO and then respond to the prompts for each option,
even those that you are not changing.
If you want to review the current defaults first,
you can answer NO. Then answer YES when the system asks if you want
to view the values. If you review the defaults and are satisfied, answer YES to
the prompt asking if you are satisfied with the values. However,
if you want to make changes, answer NO to that question and then
answer YES when the system asks if you want to reenter the values.
When selecting components, note the following as well:
Whether you choose all the default
values or select individual files, the system will allow you to
view your selections and make changes (if necessary).
If you are not sure whether you want certain components,
request help by entering a question mark (?) at the prompt for that
component (or group of components).
You should review the list of options and compare
them with the requirements for your system. If you are selecting
components individually, be sure that you include all components
necessary to support the needs of your users. Note also that certain
components depend upon the installation of other components.
OpenVMS Management Station software is automatically
installed on your OpenVMS system disk when you accept all the default
values. If you do not accept the default values, you must select
the OpenVMS Management Station component (server and client files)
if you plan to use that product. After the installation is complete,
you can then prepare your OpenVMS Alpha system and your PC to run OpenVMS
Management Station by following the procedures described in
Preparing to Use OpenVMS Management Station.
If you decide after the upgrade to change which
OpenVMS Alpha operating system components you want installed on
your system, you must reconfigure the installation as described
in
PRESERVE Option.
After you boot the upgraded system disk and log
in, you can obtain information about individual system files by
entering HELP SYSTEM_FILES at the dollar sign prompt ($).
Unless you have specific reasons to do otherwise, HP
recommends that you accept the defaults and install all OpenVMS
options. OpenVMS and layered products have various dependencies on
many of these options. Even if you think you do not need certain
options, some OpenVMS or layered product operations might not work
correctly if other OpenVMS options are not installed.
Final Upgrade Procedure
Messages When you have answered all the prompts and selected the components
you want installed, the system allows you to review your selections
(and make changes if necessary) and then displays messages about
the following:
Notification that DECwindows Motif
for OpenVMS, DECnet-Plus for OpenVMS, DECnet Phase IV for OpenVMS,
or TCP/IP Services for OpenVMS has been upgraded (or installed)
on your system.
Notification that the upgrade has been completed.
Information about running AUTOGEN.
The menu.
The following is a sample display.
If you perform two installations at the same time to
systems connected via MEMORY CHANNEL, you might see a message similar
to the following every 5 seconds:
%PMA0 CPU00: 30-MAY-2003 14:58:40 Remote System Conflicts with
Known System - REMOTE NODE
%PMA0 CPU00: 30-MAY-2003 14:58:45 Remote System Conflicts with
Known System - REMOTE NODE
Disregard the message. The installation or upgrade will proceed
normally and the messages will not be present when the system reboots
with its real node name.
Do you want to review the options? [NO] NO
Execution phase starting ...
The following products will be installed to destinations:
CPQ AXPVMS CDSA V2.0 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS DECNET_OSI V7.3-2 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS DWMOTIF V1.3-1 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS OPENVMS V7.3-2 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS VMS V7.3-2 DISK$ALPHASYS:[VMS$COMMON.]
HP AXPVMS KERBEROS V2.0 DISK$ALPHASYS:[VMS$COMMON.]
The following products will be removed from destinations:
DEC AXPVMS CDSA V1.0-2
DEC AXPVMS DECNET_PHASE_IV V7.3-1 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS DWMOTIF V1.2-6 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS OPENVMS V7.3-1 DISK$ALPHASYS:[VMS$COMMON.]
DEC AXPVMS VMS V7.3-1 DISK$ALPHASYS:[VMS$COMMON.]
HP AXPVMS KERBEROS V1.0 DISK$ALPHASYS:[VMS$COMMON.]
Portion done: 0%..10%..20%..30%..40%..50%..60%..70%..80%..90%
**** DECwindows Motif application and run-time support files DETECTED
**** **** DECwindows device support files DETECTED ****
...100%
The following products have been installed:
CPQ AXPVMS CDSA V2.0 Layered Product
DEC AXPVMS DECNET_OSI V7.3-2 Layered Product
DEC AXPVMS DWMOTIF V1.3-1 Layered Product
DEC AXPVMS OPENVMS V7.3-2 Platform (product suite)
DEC AXPVMS VMS V7.3-2 Operating System
HP AXPVMS KERBEROS V2.0 Layered Product
The following products have been removed:
DEC AXPVMS CDSA V1.02 Layered Product
DEC AXPVMS DECNET_PHASE_IV V7.3-1 Layered Product
DEC AXPVMS DWMOTIF V1.2-6 Layered Product
DEC AXPVMS OPENVMS V7.3-1 Platform (product suite)
DEC AXPVMS VMS V7.3-1 Operating System
HP AXPVMS KERBEROS V1.0 Transition (registration)
DEC AXPVMS OPENVMS X7.3-9NA: OPENVMS and related products Platform
HP AXPVMS KERBEROS V2.0
Configure the OpenVMS Kerberos clients & servers
If Kerberos will be in use on this system
and a current Kerberos configuration will
not be used, please take the time to run
the following command after the installation
has completed (and after rebooting the system
if this is an OpenVMS Installation or Upgrade):
@SYS$STARTUP:KRB$CONFIGURE.COM
After configuration, two system files need to
be modified. The following line should be
added to SYS$MANAGER:SYSTARTUP.COM
$ @SYS$STARTUP:KRB$STARTUP
The following line must be added to
SYS$MANAGER:SYLOGIN.COM
$ @SYS$MANAGER:KRB$SYMBOLS
The Kerberos 5 V2.0 documentation has been
provided as it was received from MIT. This
documentation may differ slightly from the
OpenVMS Kerberos implementation as it describes
the Kerberos implementation in a Unix environment.
The documents are:
KRB$ROOT:[DOC]IMPLEMENT.PDF
KRB$ROOT:[DOC]LIBRARY.PDF
KRB$ROOT:[DOC]ADMIN-GUIDE.PS
KRB$ROOT:[DOC]INSTALL-GUIDE.PS
KRB$ROOT:[DOC]KRB425-GUIDE.PS
KRB$ROOT:[DOC]USER-GUIDE.PS
DEC AXPVMS DWMOTIF FV1.3-1: DECwindows Motif
System reboot is required.
If using a language variant, reboot after upgrade of language variant.
Installation Verification Procedure can be run after reboot.
The upgrade is now complete.
When the newly upgraded system is first booted, a special
startup procedure will be run. This procedure will:
o Run AUTOGEN to set system parameters.
o Reboot the system with the newly set parameters.
You may shut down now or continue with other operations.
Process AXPVMS_INSTALL logged out at 12-MAY-2003 15:34:22.47
Press Return to continue...
****************************************************************
You can install or upgrade the OpenVMS Alpha operating system
or you can install or upgrade layered products that are included
on the OpenVMS Alpha operating system CD-ROM.
You can also execute DCL commands and procedures to perform
"standalone" tasks, such as backing up the system disk.
Please choose one of the following:
1) Upgrade, install or reconfigure OpenVMS Alpha Version 7.3-2
2) Display products and patches that this procedure can install
3) Install or upgrade layered products and patches
4) Show installed products
5) Reconfigure installed products
6) Remove installed products
7) Execute DCL commands and procedures
8) Shut down this system
Installing Layered
Products or Shutting Down the System If you want to install layered products, you can use the menu
system included on the operating system CD-ROM, as explained in
Using the Install or Upgrade Layered Products Option (3). For layered
products requiring VMSINSTAL, the section
Alternate Procedure gives an alternate procedure.
If you do not want to install layered products or perform
any other operations prior to booting the upgraded disk, do the
following:
Shut down the
system by choosing the shutdown option (8) from the menu.
HP OpenVMS Alpha Version 7.3-2 Upgrade and Installation... 
Upgrading the OpenVMS Alpha Operating System
