 |
OpenVMS/Hangul RTL Korean Screen Management (SMG$)
Manual
SMG$GET_VIEWPORT_CHAR
The Get Characteristics of Display Viewport routine returns the
characteristics of the specified viewport.
Format
SMG$GET_VIEWPORT_CHAR display-id [,viewport-row-start]
[,viewport-column-start] [,viewport-number-rows]
[,viewport-number-columns]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
display-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Identifier of the virtual display associated with the viewport. The
display-id argument is the address of an unsigned
longword containing this identifier.
viewport-row-start
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Optional argument that receives the starting row number of the
viewport. The viewport-row-start argument is the
address of a signed longword that receives this row number.
viewport-column-start
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Optional argument that receives the starting column number of the
specified viewport. The viewport-column-start argument
is the address of a signed longword that receives this column number.
viewport-number-rows
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Optional argument that receives the number of rows in the specified
viewport. The viewport-number-rows argument is the
address of a signed longword that receives this number.
viewport-number-columns
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
write only |
| mechanism |
by reference |
Optional argument that receives the number of columns in the specified
viewport. The viewport-number-columns argument is the
address of a signed longword that receives this number.
Description
SMG$GET_VIEWPORT_CHAR returns the requested characteristics of the
specified viewport.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVDIS_ID
|
Invalid
display-id.
|
|
SMG$_NO_WINASSOC
|
No viewport associated with the virtual display.
|
|
SMG$_WRONUMARG
|
Wrong number of arguments.
|
Example
|
C+
C This DEC Fortran example demonstrates the use of SMG$GET_VIEWPORT_CHAR.
C The viewport created will start at row 3, column 4. It will consist of
C 7 rows and 29 columns. Note the parameters used in the SMG$CREATE_VIEWPORT
C routine. I request 26 rows and 55 columns, but my viewport is truncated
C to fit.
C-
IMPLICIT INTEGER (A-Z)
INCLUDE '($SMGDEF)'
C Create the virtual display. Give it a border.
ROWS = 4
COLUMNS = 34
STATUS = SMG$CREATE_VIRTUAL_DISPLAY
1 ( ROWS, COLUMNS, DISPLAY1,SMG$M_BORDER )
IF (.NOT. STATUS) CALL LIB$SIGNAL(%val(STATUS))
C Create the pasteboard.
STATUS = SMG$CREATE_PASTEBOARD (PASTE1)
IF (.NOT. STATUS) CALL LIB$SIGNAL(%val(STATUS))
C Put data in the virtual display.
STATUS = SMG$PUT_CHARS ( DISPLAY1,
1 'This is row number 1 of 4, you see', 1, 1 )
IF (.not. STATUS) CALL LIB$SIGNAL(%val(STATUS))
STATUS = SMG$PUT_CHARS ( DISPLAY1,
1 'This is row number 2 of 4, you see', 2, 1 )
IF (.not. STATUS) CALL LIB$SIGNAL(%val(STATUS))
STATUS = SMG$PUT_CHARS ( DISPLAY1,
1 'This is row number 3 of 4, you see', 3, 1 )
IF (.not. STATUS) CALL LIB$SIGNAL(%val(STATUS))
STATUS = SMG$PUT_CHARS ( DISPLAY1,
1 'This is row number 4 of 4, you see', 4, 1 )
IF (.not. STATUS) CALL LIB$SIGNAL(%val(STATUS))
C Paste the virtual display.
STATUS = SMG$COPY_VIRTUAL_DISPLAY(DISPLAY1,DISPLAY2)
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$LABEL_BORDER (DISPLAY1, 'Full Display',,,SMG$M_BOLD)
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$LABEL_BORDER (DISPLAY2,'Viewport',,,SMG$M_BOLD)
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$PASTE_VIRTUAL_DISPLAY ( DISPLAY1, PASTE1, 2, 2 )
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$CREATE_VIEWPORT ( DISPLAY2, 1, 5, 26, 55 )
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$PASTE_VIRTUAL_DISPLAY ( DISPLAY2, PASTE1, 8, 2 )
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
CALL SMG$SET_PHYSICAL_CURSOR(PASTE1, 16, 1)
TYPE *, ' '
TYPE *, LIB$SIGNAL(%VAL(STATUS))
STATUS = SMG$GET_VIEWPORT_CHAR ( DISPLAY2, A, B, C, D )
IF (.NOT. STATUS) CALL LIB$SIGNAL(%VAL(STATUS))
TYPE *, ' '
WRITE(5,7) A,B
7 FORMAT(1X,'Row start = ',I2,8X,'Column start = ',I2)
TYPE *, ' '
WRITE(5,8) C,D
8 FORMAT(1X,'Number of rows =',I2,4X,'Number of columns =',I3)
END
|
The output for this program is shown in Figure SMG-26.
Figure SMG-26 Output Generated by SMG$GET_VIEWPORT_CHAR
SMG$HOME_CURSOR
The Home Cursor routine moves the virtual cursor to the specified
corner of a virtual display.
Format
SMG$HOME_CURSOR display-id [,position-code]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
display-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the virtual display in which the virtual cursor is moved. The
display-id argument is the address of a longword that
contains the display identifier. Display-id is
returned by SMG$CREATE_VIRTUAL_DISPLAY.
position-code
| OpenVMS usage |
longword_unsigned |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the point to which the virtual cursor moves. The
position-code argument is the address of a longword
that contains the position code.
Valid codes for position-code are as follows:
| Code |
Meaning |
|
SMG$C_UPPER_LEFT
|
Row 1, column 1 (the upper left-hand corner). This is the default if
position-code is not specified.
|
|
SMG$C_LOWER_LEFT
|
Row
n, column 1 (where
n is the number of rows in the display). That is, the lower
left-hand corner. It is useful to specify this position when accepting
input for an upward-scrolling virtual display.
|
|
SMG$C_UPPER_RIGHT
|
Row 1, column
m (where
m is the number of columns in the display). That is, the upper
right-hand corner.
|
|
SMG$C_LOWER_RIGHT
|
Row
n, column
m (where
n is the number of rows and
m is the number of columns in the display). That is, the lower
right-hand corner.
|
Description
SMG$HOME_CURSOR moves the virtual cursor to a corner of the specified
virtual display, according to the code specified in the
position-code argument. You do not need to know the
dimensions of the virtual display, or the virtual cursor location. If
you omit the position-code argument, SMG$HOME_CURSOR
moves the virtual display cursor to the upper left-hand corner of the
virtual display.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_INVDIS_ID
|
Invalid
display-id.
|
|
SMG$_WRONUMARG
|
Wrong number of arguments.
|
|
SMG$_INVARG
|
Invalid argument.
|
SMG$INIT_TERM_TABLE
The Initialize Terminal Table routine initializes the TERMTABLE
database for the terminal named, so that subsequent calls to
SMG$GET_TERM_DATA can extract information and command strings for that
terminal.
Format
SMG$INIT_TERM_TABLE terminal-name, termtable-address
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
terminal-name
| OpenVMS usage |
device_name |
| type |
character string |
| access |
read only |
| mechanism |
by descriptor |
Specifies the name of the terminal. The terminal-name
argument is the address of a descriptor pointing to the terminal name.
The name must be an entry in TERMTABLE.EXE.
termtable-address
| OpenVMS usage |
address |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by reference |
Address of the entry for a particular type of terminal in
TERMTABLE.EXE. The termtable-address argument is the
address of an unsigned longword that contains the address of the
terminal capabilities table.
You use this address when calling the SMG$GET_TERM_DATA procedure for
the specified type of terminal. Termtable-address is
also returned by SMG$INIT_TERM_TABLE_BY_TYPE.
Description
SMG$INIT_TERM_TABLE initializes the TERMTABLE database for the terminal
named, so that subsequent calls to SMG$GET_TERM_DATA can extract
information and command strings for that terminal. This routine should
be used only when you perform direct (non-SMG$) I/O to terminals.
SMG$INIT_TERM_TABLE first searches for TERMTABLE.EXE in the area
logically named TERM$TABLOC. If TERMTABLE.EXE is not found there, the
routine searches the global section SMG$TERMTABLE.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_PRISECMAP
|
Successful completion. The definition was found in a private TERMTABLE.
|
|
SMG$_GBLSECMAP
|
Successful completion. The definition was found in the global TERMTABLE.
|
|
SMG$_UNDTERNOP
|
Undefined terminal. No definition was found for the terminal and no
private TERMTABLE was found.
|
|
SMG$_UNDTERNOS
|
Undefined terminal. No definition was found for the terminal and no
system TERMTABLE was found.
|
|
SMG$_UNDTERNAM
|
Undefined terminal name.
|
SMG$INIT_TERM_TABLE_BY_TYPE
The Initialize TERMTABLE by OpenVMS Terminal Type routine initializes
the TERMTABLE database for the terminal named, so that subsequent calls
to SMG$GET_TERM_DATA can extract information and command strings for
that terminal.
Format
SMG$INIT_TERM_TABLE_BY_TYPE terminal-type ,termtable-address
[,terminal-name]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
terminal-type
| OpenVMS usage |
byte_signed |
| type |
byte (signed) |
| access |
read only |
| mechanism |
by reference |
The device type of the terminal, as designated by a OpenVMS symbolic
terminal type or by another value returned by the $GETDVI system
service. The terminal-type argument is the address of
a signed byte that contains the terminal type.
termtable-address
| OpenVMS usage |
address |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by reference |
Address of the entry for a particular type of terminal in
TERMTABLE.EXE. The termtable-address argument is the
address of an unsigned longword into which is written the address of a
terminal entry.
You use this address when calling the SMG$GET_TERM_DATA procedure for
the specified type of terminal.
terminal-name
| OpenVMS usage |
device_name |
| type |
character string |
| access |
write only |
| mechanism |
by descriptor |
A string into which is written the terminal name associated with the
device type. The terminal-name argument is the address
of a descriptor pointing to the string into which the terminal name is
written.
Description
SMG$INIT_TERM_TABLE_BY_TYPE initializes the TERMTABLE database for the
terminal type specified, so that subsequent calls to SMG$GET_TERM_DATA
can extract information and command strings for that type of terminal.
This routine should be used only when you perform direct (non-SMG$) I/O
to terminals.
SMG$INIT_TERM_TABLE_BY_TYPE first searches for TERMTABLE.EXE in the
area logically named TERM$TABLOC. If TERMTABLE.EXE is not found there,
the routine searches the global section SMG$TERMTABLE.
Condition Values Returned
|
SS$_NORMAL
|
Normal successful completion.
|
|
SMG$_PRISECMAP
|
Successful completion. The definition was found in a private TERMTABLE.
|
|
SMG$_GBLSECMAP
|
Successful completion. The definition was found in the global TERMTABLE.
|
|
SMG$_UNDTERNOP
|
Undefined terminal. No definition was found for the terminal and no
private TERMTABLE was found.
|
|
SMG$_UNDTERNOS
|
Undefined terminal. No definition was found for the terminal and no
system TERMTABLE was found.
|
|
SMG$_UNDTERNAM
|
Undefined terminal name.
|
SMG$INSERT_CHARS
The Insert Characters routine inserts characters into a virtual display.
Format
SMG$INSERT_CHARS display-id ,character-string ,start-row ,start-column
[,rendition-set] [,rendition-complement] [,character-set]
RETURNS
| OpenVMS usage |
cond_value |
| type |
longword (unsigned) |
| access |
write only |
| mechanism |
by value |
Arguments
display-id
| OpenVMS usage |
identifier |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the virtual display affected. The
pasteboard-id argument is the address of an unsigned
longword that contains the pasteboard identifier.
Display-id is returned by SMG$CREATE_VIRTUAL_DISPLAY.
character-string
| OpenVMS usage |
char_string |
| type |
character string |
| access |
read only |
| mechanism |
by descriptor |
The character string to be inserted. The
character-string argument is the address of a
descriptor that points to the string to be inserted.
start-row
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
read only |
| mechanism |
by reference |
The row position at which to begin the insertion. The
start-row argument is the address of a signed longword
that contains the row number.
start-column
| OpenVMS usage |
longword_signed |
| type |
longword (signed) |
| access |
read only |
| mechanism |
by reference |
The column position at which to begin the insertion. The
start-column argument is the address of a signed
longword that contains the column number.
rendition-set
| OpenVMS usage |
mask_longword |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Attribute specifier. The optional rendition-set
argument is the address of a longword bit mask in which each attribute
set causes the corresponding attribute to be set in the display. The
following attributes can be specified using the
rendition-set argument:
|
SMG$M_BLINK
|
Displays blinking characters.
|
|
SMG$M_BOLD
|
Displays characters in higher-than-normal intensity.
|
|
SMG$M_REVERSE
|
Displays characters in reverse video, that is, using the opposite of
the default rendition of the virtual display.
|
|
SMG$M_UNDERLINE
|
Displays underlined characters.
|
|
SMG$M_INVISIBLE
|
Specifies invisible characters; that is, the characters exist in the
virtual display but do not appear on the pasteboard.
|
SMG$M_USER1 through
SMG$M_USER8
|
Displays user-defined attributes.
|
The display-id argument must be specified when you use
the rendition-set argument.
rendition-complement
| OpenVMS usage |
mask_longword |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Attribute complement specifier. The optional
rendition-complement argument is the address of a
longword bit mask in which each attribute set causes the corresponding
attribute to be complemented in the display. All of the attributes that
can be specified with the rendition-set argument can
be complemented with the rendition-complement
argument. The display-id argument must be specified
when you use the rendition-complement argument.
The optional arguments rendition-set and
rendition-complement let the user control the
attributes of the virtual display. The rendition-set
argument sets certain virtual display attributes, while
rendition-complement complements these attributes. If
the same bit is specified in both the rendition-set
and rendition-complement parameters,
rendition-set is evaluated first, followed by
rendition-complement. By using these two parameters
together, the user can control each virtual display attribute in a
single procedure call. On a single-attribute basis, the user can cause
the following transformations:
| Set |
Complement |
Action |
|
0
|
0
|
Attribute set to default
|
|
1
|
0
|
Attribute on
|
|
0
|
1
|
Attribute set to complement of default setting
|
|
1
|
1
|
Attribute off
|
character-set
| OpenVMS usage |
longword_unsigned |
| type |
longword (unsigned) |
| access |
read only |
| mechanism |
by reference |
Specifies the character set of the string in the
character-string. The character-set
argument is the address of an unsigned longword that contains the
character set code. If this argument is omitted, the default character
set will be the character set set up by SMG$CREATE_VIRTUAL_DISPLAY or
by SMG$CHANGE_VIRTUAL_DISPLAY.
| Value |
Character Set |
|
SMG$C_ASCII
|
ASCII
|
|
SMG$C_SPEC_GRAPHICS
|
DEC Special Graphics
|
|
SMG$C_HANGUL
|
DEC Hangul
|
1One of DEC supplemental character set and Latin-1 character
set.
Description
SMG$INSERT_CHARS inserts the specified character string at the
start-row and start-column positions
specified. Characters to the right of the insertion are shifted to the
right. Note that any characters which do not fit on the current line
are discarded. The virtual cursor remains at the character position
following the last character inserted.
|
