Chapter 6 |
6
|
Hardware Release Notes
|
6.1
|
MP and BMC Console Restrictions (I64 Only)
|
6.1.1
|
Input, Output, and Error Device Restriction
|
6.1.2
|
Remapping Ctrl/H to the Delete Key
|
6.2
|
AlphaServer 2100
|
6.2.1
|
Console Display
|
6.2.2
|
SCSI Controller Restriction
|
6.3
|
AlphaServer 8200/8400: FRU Table Error
|
6.4
|
AlphaServer ES47/ES80/GS1280 Systems
|
6.4.1
|
INIT Console Command Usage on ES47/ES80/GS1280 Soft Partitions
|
6.4.2
|
RAD Support
|
6.4.3
|
License Requirements
|
6.4.4
|
STOP/CPU and Shutdown Behavior
|
6.4.5
|
Setting Time at MBM
|
6.5
|
AlphaServer GS Series Systems
|
6.5.1
|
AlphaServer GS80/160/320 Systems: Device Restriction
|
6.5.2
|
OpenVMS Galaxy License Enforcement
|
6.5.3
|
Installing Licenses
|
6.5.4
|
AlphaServer GS60/GS60E/GS140 Multiple I/O Port Module Configuration Restriction
|
6.6
|
AlphaStation 200/400: ISA_CONFIG.DAT Changes Required
|
6.7
|
AlphaStation 255: PCI Configuration Restriction
|
6.8
|
ATI RADEON 7000 Graphics (I64 Only)
|
6.8.1
|
I64 Graphics Support
|
6.8.2
|
Hardware Accelerated 3D Graphics Not Supported on RADEON 7000
|
6.9
|
ATI RADEON 7500 Graphics
|
6.9.1
|
Resource Requirements
|
6.9.2
|
DECW$OPENGLSHR_RADEON.EXE Renamed to DECW$MESA3DSHR_RADEON.EXE
|
6.9.3
|
Support Limitations
|
6.9.4
|
Video Artifacts at High Refresh Rates
|
6.9.5
|
OpenGL Supports IEEE Arithmetic Only
|
6.9.6
|
DECwindows Server Hangs When Output Is Written to the Graphics Console (OPA0)
|
6.9.7
|
Monitor Must Be Connected During Initialization
|
6.9.8
|
Boot Reset Recommendation (Alpha Only)
|
6.9.9
|
No Overlay Planes
|
6.9.10
|
Single Colormap
|
6.9.11
|
Single Bit Depth for All Windows
|
6.9.12
|
Pixel Depth for Read/Write Color Map
|
6.9.13
|
Backing Store/Save Unders Not Supported for 3D Windows
|
6.9.14
|
Threads Restriction
|
6.9.15
|
No Support for Single Buffered Visuals
|
6.9.16
|
No 3D Support for Color Index Mode
|
6.9.17
|
Timer Mechanism
|
6.10
|
DECwindows X11 Display Server (Alpha Only)
|
6.10.1
|
S3 Multihead Graphics
|
6.10.2
|
Multiple USB Keyboards and Mice Not Supported on DECwindows on OpenVMS V8.3
|
6.11
|
DIGITAL Modular Computing Components (DMCC)
|
6.11.1
|
Alpha 5/366 and 5/433 PICMG SBC Restriction
|
6.11.2
|
Updating the SRM Console
|
6.12
|
Digital Personal Workstation: Booting OpenVMS V7.3-1 and Higher
|
6.13
|
Dual-Controller HSGnn with Many LUNs Can Fail Under Heavy I/O Load
|
6.14
|
Open3D Graphics Licensing Change
|
6.15
|
PowerStorm 300/350 PCI Graphics Support for OpenVMS
|
6.16
|
RFnn DSSI Disk Devices and Controller Memory Errors
|
6.17
|
RZnn Disk Drive Considerations
|
6.17.1
|
RZ25M and RZ26N Disk Drives: Recommendations
|
6.17.2
|
RZ26N and RZ28M Disks: Recommended Firmware Support
|
6.17.3
|
RZ26L and RZ28 Disks: Required Firmware for Multihost Use
|
6.17.3.1
|
Firmware Revision Level 442 Requirements
|
6.17.3.2
|
Firmware Revision Level 442 Installation Procedure
|
6.18
|
sx1000 Integrity Superdome
|
6.19
|
ZLX Graphics Boards Support
|
6.20
|
Recompiling and Relinking OpenVMS Device Drivers
|
6.20.1
|
Alpha and VAX SCSI Device Drivers
|
6.20.2
|
OpenVMS Alpha Device Drivers
|
6.21
|
Device Driver MON Version Handling
|
6.22
|
Possible Per-Threads Security Impact on Alpha Device Drivers
|
6.23
|
Device IPL Setup for OpenVMS Alpha Drivers
|
6.24
|
CRCTX Routines Enhanced
|
6.25
|
Adapter Release Notes
|
6.25.1
|
Fibre Channel EFI Driver and Firmware Requirements
|
6.25.2
|
Booting with Multiple Fibre Channel Boot Entries
|
Appendix A |
Appendix A
|
Product Retirement Notices
|
A.1
|
Compaq Open3D Layered Product Not Supported in Version 8.2
|
A.2
|
Open3D Graphics Licensing Change
|
A.3
|
DECamds Not Supported on OpenVMS Version 8.2
|
A.4
|
DECevent Not Supported
|
A.5
|
DECwrite Reached End-of-Service Life in December 2004
|
A.6
|
Error Log Report Formatter (ERF) Unsupported
|
A.7
|
ISA_CONFIG.DAT Unsupported in Future Release
|
A.8
|
POSIX 1003.4a Draft 4 Interface May Be Retired
|
A.9
|
NetBeans Version 3.6 Support Ends with OpenVMS Version 8.3
|
A.10
|
Last Ordering Dates for Alpha Systems
|
A.11
|
Archived Manuals
|
Appendix B |
Appendix B
|
Interlocked Memory Instructions (Alpha Only)
|
B.1
|
Required Code Checks
|
B.2
|
Using the Code Analysis Tool (SRM_CHECK)
|
B.3
|
Noncompliant Code Characteristics
|
B.4
|
Coding Requirements
|
B.5
|
Compiler Versions
|
B.6
|
Recompiling Code with ALONONPAGED_INLINE or LAL_REMOVE_FIRST
|