 |
HP OpenVMS Version 8.3 Upgrade and Installation Manual > Chapter 7 After Installing or Upgrading the OpenVMS Operating
System
Installing and Configuring Layered Products (New Installations, Some Upgrades)
The OpenVMS operating system kit includes several layered
products. These include the system-integrated product (SIP) kits
for the following products that are installed automatically: Availability Manager (base)
for OpenVMS (required) CDSA for OpenVMS (required) Kerberos for OpenVMS (required) SSL for OpenVMS (required) Performance Data Collector
base software, TDC_RT (required)
These layered products also include the system-integrated
product (SIP) kits for the following products that you can install
optionally as part of the OpenVMS operating system installation: DECwindows Motif for OpenVMS DECnet Phase IV for OpenVMS TCP/IP Services for OpenVMS WBEM Services for OpenVMS
(OpenVMS I64 only)
These five layered products are included in the operating
system media and can be installed using either the steps shown in
this section or the alternative procedure described in “Alternative Procedure”. Other layered products—whether
provided by HP on other CDs in the operating system distribution,
in the Software Product Library CD set, or on a CD provided by a
third-party company—should be installed using the steps
shown in “Alternative Procedure”. In addition to the SIPs, the OpenVMS I64 OE DVD includes kits
for various products that are part of the OpenVMS OEs. HP does
not support installing these OE product kits while booted from the
OE DVD. To install these OE products, you must use the procedure
described in “Alternative Procedure”. As of Version 8.3, most PCSI kits included on the OpenVMS
distribution media are signed using Secure Delivery. Signed PCSI
kits that are installed from the OpenVMS I64 operating system distribution
media are validated. (Kits installed from the OpenVMS Alpha operating
system distribution CD are not validated; this restriction is due
to space limitations of the distribution CD.) On both OpenVMS Alpha
and I64 systems, signed PCSI kits that you install subsequently are validated (including
signed kits on the distribution media). | | | |  | NOTE: To use menu option 3, the target system must have
the identical version of the OpenVMS operating system as the operating
system media. If you need to install layered products on a target
system that has a different version of the operating system, use
the alternative procedure. | | | | |
To use menu option 3 of the operating system menu, follow
these steps: Before you install
any layered products, be sure you back up the system disk. If you are not already booted from the operating system
media, shut down the system and boot the operating system media.
For instructions on how to shut down the OpenVMS I64 system, see “Halt and Shutdown Procedures”; for instructions
on how to shut down the OpenVMS Alpha system, see “Shutting Down the
System”. To view a list of products that can be installed, choose
option 2 on the menu. If the layered product that you want to install
is not listed in the display, install the product by using the alternative
procedure described in “Alternative Procedure”, or see the documentation you received with the layered
product. Note that HP does not support VMSINSTAL, PRODUCT INSTALL,
or other PRODUCT commands from the DCL option on the operating system
menu. To install layered products, choose option 3 on the
menu. For more instructions, see “Using the Install
or Upgrade Layered Products Option (3)”. After the installation completes, shut down the system
by selecting option 9 on the menu. When you boot the target system,
the layered products you installed will be present.
For additional information about installing layered products,
see the HP OpenVMS System Manager's Manual. Alternative Procedure | |
Use this alternative procedure to install the following products: Layered products on a target
system that has a different operating system version than that of
the operating system media (CD/DVD). Layered products that require
VMSINSTAL (indicated in the directories by save-set file names with
file types of .A, .B, and so on) SIP kits (as an alternative
to using menu option 3 of the operating system menu on the media) Products on the Layered Products,
Freeware, System Tools, and e-Business Integration and Infrastructure
CDs Third-party software products
(such as database products, accounting software, and so forth)
For a list of layered products you can install, see the Software
Product Descriptions included with your operating system kit. Note
that some products require a license key (PAK) from HP. Follow these steps: Before you install
all your layered products, be sure you back up the system disk.
In addition, ensure that a license has been loaded for the software.
Note also that most layered products require changes to SYSGEN
parameters or AUTHORIZE values, and to system files such as SYLOGICALS.COM,
SYLOGIN.COM, and SYSTARTUP_VMS.COM. For more information, see the
following: Installation
guides for these layered products HP OpenVMS System Manager's Manual, Volume 1: Essentials
After your target system disk runs AUTOGEN and boots
(if necessary), mount the OpenVMS operating system media. For
example, if the device with the operating system media is DKA400, use
the following command: $ MOUNT/OVERRIDE=IDENTIFICATION DKA400 |
Locate the directories and files containing the available
layered products. For example, if the device name is DKA400:, enter
the following command: $ DIRECTORY /NOHEAD/NOTRAIL DKA400:[*.KIT] |
You can use the PRODUCT FIND command to locate kits by using
the PCSI utility. For example: $ PRODUCT FIND * /SOURCE=DKA400:[*.KIT] |
To install layered products that require VMSINSTAL (indicated
in the directories by save-set file names with file types of .A,
.B, and so on), enter the @SYS$UPDATE:VMSINSTAL command and then
specify the device name and directory at the prompt. For example: $ @SYS$UPDATE:VMSINSTAL
* Where will the distribution volumes be mounted: DKA400:[DIAA032.KIT] |
To install layered products that require the PCSI utility
(indicated in the directories by file names with file types of .PCSI
or .PCSI$COMPRESSED), use the PRODUCT INSTALL command to specify
the device name and directory. Following is an example of the PRODUCT
INSTALL command on an I64 system: $ PRODUCT INSTALL FORTRAN /SOURCE=DKB400:[I64_FORT075.KIT] |
|
|
