HP OpenVMS Systems Documentation

None

Required Quota

$UPDSEC_64 uses the calling process' direct I/O limit (DIRIO) quota in queuing the I/O request and uses the calling process' AST limit (ASTLM) quota if the astadr_64 argument is specified.

Related Services

$CRMPSC, $CRMPSC_FILE_64, $CRMPSC_GFILE_64, $CRMPSC_GPFILE_64, $MGBLSC_64, $UPDSEC

Condition Values Returned

SS$_NORMAL	The service completed successfully. One or more I/O requests were queued.
SS$_NOTMODIFIED	The service completed successfully. No pages in the input address range were section pages that had been modified. No I/O requests were queued.
SS$_ACCVIO	The return_va_64, return_length_64, or iosb_64 argument cannot be written by the caller.
SS$_EXASTLM	The process has exceeded its AST limit quota.
SS$_EXBYTLM	The process has exceeded the byte count quota.
SS$_ILLEFC	An illegal event flag number was specified.
SS$_PAGNOTINREG	A page in the specified range is not within the process private address space.
SS$_PAGOWNVIO	A page in the specified input address range is owned by a more privileged access mode.
SS$_UNASCEFC	The process is not associated with the cluster containing the specified event flag.

On Alpha and Integrity server systems, writes all modified pages in an active private or global disk file section back into the section file on disk. Zero or more I/O requests are queued, based on the number of pages that have been modified.

The $UPDSEC_64W service completes synchronously; that is, it returns to the caller after writing all updated pages.

In all other respects, $UPDSEC_64W is identical to $UPDSEC_64. For additional information about the $UPDSEC_64W service, see the description of $UPDSEC_64 in this manual.

This service accepts 64-bit addresses.

Format

SYS$UPDSEC_64W start_va_64 ,length_64 ,acmode ,updflg ,efn ,iosa_64 ,return_va_64 ,return_length_64 [,astadr_64 [,astprm_64]]

C Prototype

int sys$updsec_64w (void *start_va_64, unsigned __int64 length_64, unsigned int acmode, unsigned int updflg, unsigned int efn, struct _iosa *iosa_64, void *(*(return_va_64)), unsigned __int64 *return_length_64,...);

Verifies that a proxy exists and returns a valid local user for the caller to use to create a local login.

Format

SYS$VERIFY_PROXY rem_node ,rem_user ,[proposed_user] ,local_user ,local_user_length ,[flags]

C Prototype

int sys$verify_proxy (void *rem_node, void *rem_user, void *proposed_user, void *local_user, unsigned short int *local_user_len, unsigned int flags);

Arguments

rem_node

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor--fixed-length string descriptor

Remote node name of the proxy to be verified. The rem_node argument is the address of a character-string descriptor pointing to the remote node name string.

A remote node name consists of 1 to 1024 characters. No specific characters, format, or case are required for a remote node name string. All node names are converted to their DECnet for OpenVMS full name unless the PRX$M_BYPASS_EXPAND flag is set with the flags argument.

Wildcards are not recognized. If you specify a wildcard character in the rem_node argument, it is ignored and assumed to be part of the requested node name.

rem_user

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor--fixed-length string descriptor

Remote user name of the proxy to be verified. The rem_user argument is the address of a character-string descriptor pointing to the user name string.

A remote user name consists of 1 to 32 alphanumeric characters, including dollar signs ($), underscores (_), and brackets ([ ]). Any lowercase characters specified are automatically converted to uppercase.

The rem_user argument can be specified in user identification code (UIC) format ([group, member]). Brackets are allowed only if the remote user name string specifies a UIC. Group and member are character-string representations of octal numbers with no leading zeros.

Wildcards are not allowed for the remote user specification. If wildcard characters are present in the string specified by the rem_user argument, the service returns SS$_BADPARAM.

proposed_user

OpenVMS usage:	char_string
type:	character-coded text string
access:	read only
mechanism:	by descriptor--fixed-length string descriptor

Local user the caller suggests be used for the proxy login. The proposed_user argument is the address of a character-string descriptor pointing to the proposed local user name.

The proposed local user consists of 1 to 32 alphanumeric characters, including dollar signs ($) and underscores (_). Any lowercase characters specified are automatically converted to uppercase.

See the Description section for information about the interaction of this argument with the return value of the local_user argument.

local_user

OpenVMS usage:	char_string
type:	character-coded text string
access:	write only
mechanism:	by descriptor--fixed-length string descriptor

Local user the caller must use for a proxy login. The local_user argument is the address of a 32-byte character-string descriptor pointer to receive the local user name the caller must use for a proxy login for the proxy with the remote node name specified by the rem_node argument and the remote user name specified by the rem_user argument.

A local user name is a 32-character blank padded string of alphanumeric characters, including dollar signs ($) and underscores (_).

local_user_length

OpenVMS usage:	output length
type:	word (unsigned)
access:	write only
mechanism:	by reference

Length of the returned local user name in the local_user argument. The local_user_length argument is the address of an unsigned word to receive the length, in bytes, of the character string returned in the local_user argument.

flags

OpenVMS usage:	mask_longword
type:	longword (unsigned)
access:	read only
mechanism:	by value

Functional specification for the service and type of user the local_user argument represents. The flags argument is a longword bit mask wherein each bit corresponds to an option.

Each flag option has a symbolic name. The $PRXDEF macro defines the following symbolic name:

Symbolic Name	Description
PRX$M_BYPASS_EXPAND	The service should not convert the node name specified in the rem_node argument to its corresponding DECnet for OpenVMS full name. If this flag is set, it is the caller's responsibility to ensure that the fully expanded node name is passed into the service.

Description

The Verify Proxy service verifies the existence of a proxy in the proxy database and returns the local user name the caller must use for any proxy logins.

The following description shows how the service determines which local user name the caller must use for proxy logins.

Proxies that match the remote node and remote user specified by the rem_node and rem_user arguments, respectively, are searched in the following order if the remote user name is not a UIC:

1. rem_node::rem_user
2. *::rem_user
3. rem_node::*
4. *::*

Proxies that match the remote node and remote user specified by the rem_node and rem_user arguments, respectively, are searched for in the following order if the remote user name is a UIC:

1. rem_node::rem_user
2. *::rem_user
3. rem_node::[group,*]
4. rem_node::[*,member]
5. rem_node::[*,*]
6. *::*

The following table describes how the local user name the caller must use for any proxy logins is determined if a matching proxy record is found by the search:

Remote User	Proposed User	Proxy Default User	Proxy Local User Names	Returned Local User Name
rem_user	null	null	n/a	error
rem_user	null	default user	n/a	default user
rem_user	null	*	n/a	rem_user
rem_user	prop_user	default user	n/a	prop_user
rem_user	prop_user	default user	prop_user	prop_user
rem_user	prop_user	default user	local user	error
rem_user	prop_user	default user	*	rem_user if it equals prop_user
rem_user	prop_user	*	local user	rem_user if it equals prop_user

Required Access or Privileges

You must have SYSPRV privilege.

Required Quota

None

Related Services

$ADD_PROXY, $DELETE_PROXY, $DISPLAY_PROXY

Condition Values Returned

SS$_NORMAL	The service completed successfully.
SS$_ACCVIO	The rem_node, rem_user, or proposed_user argument cannot be read by the service; or the local_user or local_user_length argument cannot be written by the service.
SS$_BADBUFLEN	The length of the rem_node, rem_user, proposed_user, or local_user argument was out of range.
SS$_BADPARAM	The rem_user or proposed_user argument contains an invalid user name.
SS$_NOREADALL	The caller does not have access to the proxy database.
This service can also return any of the following messages passed from the security server, or any OpenVMS RMS error message encountered during operations on the proxy database:
SECSRV$_BADLOCALUSERLEN	The local user name length is out of range.
SECSRV$_BADNODENAMELEN	The node name length is out of range.
SECSRV$_BADREMUSERLEN	The remote user name length is out of range.
SECSRV$_NOSUCHPROXY	The proxy specified by the rem_node and rem_user arguments does not exist in the proxy database.
SECSRV$_NOSUCHUSER	No valid user was found for the requested proxy.
SECSRV$_PROXYNOTACTIVE	Proxy processing is currently stopped. Try the request again later.
SECSRV$_SERVERNOTACTIVE	The security server is not currently active. Try the request again later.

The Wait service suspends image execution until an asynchronous record service completes. Upon completion of the service, RMS returns control to your program at the point following the Wait service call.

For additional information about this service, see the OpenVMS Record Management Services Reference Manual.

Tests a specific event flag and returns immediately if the flag is set; otherwise, the process is placed in a wait state until the event flag is set.

Format

SYS$WAITFR efn

C Prototype

int sys$waitfr (unsigned int efn);

Argument

efn

OpenVMS usage:	ef_number
type:	longword (unsigned)
access:	read only
mechanism:	by value

Number of the event flag for which to wait. The efn argument is a longword containing this number; however, $WAITFR uses only the low-order byte.

Description

The Wait for Single Event Flag service tests a specific event flag and returns immediately if the flag is set. Otherwise, the process is placed in a wait state until the event flag is set. The wait state caused by this service can be interrupted by an asynchronous system trap (AST) if (1) the access mode at which the AST executes is equal to or more privileged than the access mode from which the $WAITFR service was issued and (2) the process is enabled for ASTs at that access mode.

When a wait state is interrupted by an AST and after the AST service routine completes execution, the operating system repeats the $WAITFR request on behalf of the process. At this point, if the event flag has been set, the process resumes execution.

Required Access or Privileges

None

Required Quota

None

Related Services

$ASCEFC, $CLREF, $DACEFC, $DLCEFC, $READEF, $SETEF, $WFLAND, $WFLOR

Condition Values Returned

SS$_NORMAL	The service completed successfully.
SS$_ILLEFC	You specified an illegal event flag number.
SS$_UNASEFC	The process is not associated with the cluster containing the specified event flag.

Activates a process that has placed itself in a state of hibernation with the Hibernate ($HIBER) service.

This service accepts 64-bit addresses.

Format

SYS$WAKE [pidadr] ,[prcnam]

C Prototype

int sys$wake (unsigned int *pidadr, void *prcnam);

Arguments

pidadr

OpenVMS usage:	process_id
type:	longword (unsigned)
access:	modify
mechanism:	by 32- or 64-bit reference

Process identification (PID) of the process to be activated. The pidadr argument is the 32- or 64-bit address of a longword that contains the PID. The pidadr argument can refer to a process running on the local node or a process running on another node in the cluster.

prcnam

OpenVMS usage:	process_name
type:	character-coded text string
access:	read only
mechanism:	by 32- or 64-bit descriptor--fixed-length string descriptor

Process name of the process to be activated. The prcnam argument is the 32- or 64-bit address of a 32- or 64-bit character string descriptor pointing to the process name. A process running on the local node can be identified with a 1 to 15 character string.

To identify a process on a particular node in a cluster, specify the full process name, which includes the node name as well as the process name. The full process name can contain up to 23 characters.

The process name is implicitly qualified by the UIC group number of the calling process. For this reason, you can use the prcnam argument only if the process to be activated is in the same UIC group as the calling process. To activate a process in another UIC group, you must specify the pidadr argument.

Description

The Wake Process from Hibernation service activates a process that has placed itself in a state of hibernation with the Hibernate ($HIBER) service. If you specify neither the pidadr nor the prcnam argument, the wake request is issued for the calling process.

If the longword at address pidadr is the value 0, the PID of the target process is returned.

If one or more wake requests are issued for a process not currently hibernating, a subsequent hibernate request completes immediately; that is, the process does not hibernate. No count of outstanding wakeup requests is maintained.

You can also activate a hibernating process with the Schedule Wakeup ($SCHDWK) service.

Required Access or Privileges

Depending on the operation, the calling process might need one of the following privileges to use $WAKE:

• GROUP privilege to wake another process in the same group, unless the process has the same UIC as the calling process
• WORLD privilege to wake any other process in the system

Required Quota

None

Related Services

$CANEXH, $CREPRC, $DCLEXH, $DELPRC, $EXIT, $FORCEX, $GETJPI, $GETJPIW, $HIBER, $PROCESS_SCAN, $RESUME, $SETPRI, $SETPRN, $SETPRV, $SETRWM, $SUSPND

Condition Values Returned

SS$_NORMAL	The service completed successfully.
SS$_ACCVIO	The process name string or string descriptor cannot be read by the caller, or the process identification cannot be written by the caller.
SS$_INCOMPAT	The remote node is running an incompatible version of the operating system.
SS$_IVLOGNAM	The specified process name string has a length of 0 or has more than 15 characters.
SS$_NONEXPR	The specified process does not exist, or you specified an invalid process identification.
SS$_NOPRIV	The process does not have the privilege to wake the specified process.
SS$_NOSUCHNODE	The process name refers to a node that is not currently recognized as part of the VSMcluster system.
SS$_NOSUCHTHREAD	The specified kernel thread does not exist.
SS$_REMRSRC	The remote node has insufficient resources to respond to the request. (Bring this error to the attention of your system manager.)
SS$_UNREACHABLE	The remote node is a member of the cluster but is not accepting requests. (This is normal for a brief period early in the system boot process.)