[an error occurred while processing this directive]

HP OpenVMS Systems Documentation

Content starts here HP OpenVMS System Management Utilities Reference Manual

HP OpenVMS System Management Utilities Reference Manual

Index


Previous Contents


Master Alphabetic Index
A B C D E F G H I J K L M N O P Q R S T U V W X Z

A
Access control
    required by ACL editor
    with Identifier ACEs
    with protection codes
Accounting
    enabling image-level accounting #1
    enabling image-level accounting #2
ACCOUNTING command
Accounting files
    copying records between #1
    copying records between #2
    processing to produce reports #1
    processing to produce reports #2
    processing to produce reports #3
    record format of
    types of record in
Accounting reports
    brief reports
    full reports
    summary reports
Accounting utility (ACCOUNTING)
ACEs (access control entries) #1
ACEs (access control entries) #2
    application-specific
    Creator ACEs
    Default Protection ACEs
    Identifier ACEs
    ordering entries in an ACL
    relationship to ACLs
    security alarm
    security audit
    Subsystem ACEs
ACL editor
    ACL qualifiers
    /CLASS qualifier
    control access to objects
    customizing
    exiting from
    file format required
    how to use
    invoking
    /JOURNAL qualifier
    keypad editing
    /MODE qualifier
    object ownership
    /OBJECT_TYPE qualifier
    privileges required
    prompting by
    /RECOVER qualifier
    specifying file type
    specifying object class #1
    specifying object class #2
    specifying object class #3
    wildcard restriction
ACL section files
ACLs (access control lists)
    impact of length on performance
    list of supported object classes
    relationship to ACEs
    rules for ordering entries
ACP system parameters
    ACP_BASEPRIO
    ACP_DATACHECK #1
    ACP_DATACHECK #2
    ACP_DINDXCACHE
    ACP_DIRCACHE
    ACP_EXTCACHE
    ACP_EXTLIMIT
    ACP_FIDCACHE
    ACP_HDRCACHE
    ACP_MAPCACHE
    ACP_MAXREAD
    ACP_MULTIPLE
    ACP_QUOCACHE
    ACP_REBLDSYSD
    ACP_SHARE
    ACP_SWAPFLGS
    ACP_SYSACC
    ACP_WINDOW
    ACP_WORKSET
    ACP_WRITEBACK
    ACP_XQP_RES
Actual node name
Actual port name
Actual service name
ADD CIRCUITS command
    in Show Cluster utility
ADD CLUSTER command
    in Show Cluster utility
ADD command
    in Authorize utility
    in Install utility
ADD CONNECTIONS command
    in Show Cluster utility
ADD COUNTERS command
    in Show Cluster utility
ADD CREDITS command
    in Show Cluster utility
ADD DEVICE command
    in UCM
ADD ERRORS command
    in Show Cluster utility
ADD (Field) command
    in Show Cluster utility
ADD/IDENTIFIER command
    in Authorize utility
ADD LOCAL_PORTS command
    in Show Cluster utility
ADD MEMBERS command
    in Show Cluster utility
ADD/PROXY command
    in Authorize utility
ADD SYSTEMS command
    in Show Cluster utility
AFFINITY_SKIP system parameter
AFFINITY_TIME system parameter
AGEN$FEEDBACK.DAT file #1
AGEN$FEEDBACK.DAT file #2
AGEN$FEEDBACK.EXE file
AGEN$PARAMS.REPORT file
Alarm ACEs
    keywords
    specifying access
        criteria for
    specifying attributes for
ALF ADD command
    in SYSMAN
ALF (automatic login facility)
    adding records
    displaying records
    removing records
ALF REMOVE command
    in SYSMAN
ALF SHOW command
    in SYSMAN
/ALIAS qualifier
    in Backup utility
ALLOCLASS system parameter
ALPHAVMSSYS.OLD file
ALPHAVMSSYS.PAR file
ANALYZE/AUDIT command
    /BEFORE qualifier
    /BINARY qualifier
    /BRIEF qualifier
    /EVENT_TYPE qualifier
    /FULL qualifier
    /IGNORE qualifier
    /INTERACTIVE qualifier
    /OUTPUT qualifier #1
    /OUTPUT qualifier #2
    /PAUSE qualifier
    /SELECT qualifier
    /SINCE qualifier
    /SUMMARY qualifier
ANALYZE/DISK_STRUCTURE
    invoking
ANALYZE/DISK_STRUCTURE stages
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    directing output
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    directing output
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    directing output
    examining shadow sets
    file recovery
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    parameter
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    preventing updates to a volume
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    qualifiers
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    qualifiers
        /HOMEBLOCKS
        /[NO]CONFIRM
        /[NO]LIST
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    qualifiers
        /[NO]LOCK_VOLUME
        /[NO]OUTPUT
        /[NO]READ_CHECK
        /[NO]REPAIR
        /RECORD_ATTRIBUTES
        /SHADOW
        /STATISTICS
        /USAGE
Analyze/Disk_Structure utility (ANALYZE/DISK_STRUCTURE)
    repairing disk errors #1
    repairing disk errors #2
    reporting disk errors
    requirements and limitations
ANALYZE/ERROR_LOG command
    See also the Error Log Report Formatter (ERF) utility
ANALYZE/ERROR_LOG/ELV command
    See also the Error Log Viewer (ELV)
Application port #1
Application port #2
Application port #3
    displaying
    mapping
Application service #1
Application service #2
Application service #3
Application service #4
    defined
    setting up
/ARB_SUPPORT
    qualifier for CREATE command #1
    qualifier for CREATE command #2
ARB_SUPPORT system parameter
Arrow keys
    definition
    functions of
/ASSIST qualifier
    in Backup utility
Asterisk (*)
    as wildcard character #1
    as wildcard character #2
Asynchronous device
    LAT application ports for #1
    LAT application ports for #2
ATTACH command
    in LATCP
    in SYSMAN
Attributes
    Dynamic #1
    Dynamic #2
    Dynamic #3
    Holder Hidden #1
    Holder Hidden #2
    Holder Hidden #3
    Name Hidden #1
    Name Hidden #2
    Name Hidden #3
    No Access #1
    No Access #2
    No Access #3
    Resource #1
    Resource #2
    Resource #3
    specifying identifier characteristics
    Subsystem #1
    Subsystem #2
    Subsystem #3
Audit ACEs
    specifying access
    specifying attributes
Audit Analysis utility (ANALYZE/AUDIT)
    CONTINUE command
    default input file
    directing output
    DISPLAY command
    displaying current selection criteria
    EXIT command
    exiting from #1
    exiting from #2
    HELP command
    interactive commands #1
    interactive commands #2
    interactive commands #3
    invoking
    LIST command
    NEXT FILE command
    NEXT RECORD command
    POSITION command
    qualifiers
    selecting by access type
    selecting by account name
    selecting by device name
    selecting by facility
    selecting by identifier
    selecting by identifier holder
    selecting by image name
    selecting by installation event
    selecting by local proxy account
    selecting by network attribute
    selecting by object #1
    selecting by object #2
    selecting by parent process
    selecting by privilege
    selecting by process
    selecting by success status
    selecting by system characteristic
    selecting by terminal name
    selecting by user name
    selecting by volume #1
    selecting by volume #2
    selecting by volume #3
    selecting by volume #4
    SHOW command
AUTHORIZE command
    See Authorize utility
Authorize utility (AUTHORIZE)
    ADD command
    ADD/IDENTIFIER command
    ADD/PROXY command
    commands summary (table)
    controlling access with identifiers
    COPY command
    CREATE/PROXY command
    CREATE/RIGHTS command
    DEFAULT command
    default password
    DEFAULT record
    EXIT command
    exiting from
    GRANT/IDENTIFIER command
    HELP command
    invoking
    LIST command
    LIST/IDENTIFIER command
    LIST/PROXY command
    LIST/RIGHTS command
    login flags #1
    login flags #2
    login flags #3
    login flags #4
    MODIFY command
    MODIFY/IDENTIFIER command
    MODIFY/PROXY command
    MODIFY/SYSTEM_PASSWORD command
    privileges required
    REMOVE command
    REMOVE/IDENTIFIER command
    REMOVE/PROXY command
    RENAME command
    RENAME/IDENTIFIER command
    restrictions
    REVOKE/IDENTIFIER command
    SHOW command
    SHOW/IDENTIFIER command
    SHOW/PROXY command
    SHOW/RIGHTS command
Authorized privileges
    assigning to known images
Autoconfiguration
    Alpha devices
    VAXstation 2000 and MicroVAX 2000 devices
    VAXstation 2000 (table)
AUTOCONFIGURE command
    in SYSGEN
AUTOGEN
    NEWPARAMS.DAT file
AUTOGEN.COM command procedure
    calculation of parameter values
    collection of data #1
    collection of data #2
    displaying page, swap, and dump file size calculations
    end phase
        default
        specifying when invoking
    examining calculations of
    execution mode
        specifying when invoking
    feedback #1
    feedback #2
        collection of
        data file
        parameters affected by
    files used by
    generation of known image file list (VMSIMAGES.DAT)
    GENFILES phase
    GENPARAMS phase
    GETDATA phase
    HELP phase
    input files
    invoking
    operations performed by
    output files
    parameters to
    phases
        specifying when invoking
    REBOOT phase
    restriction with changing system files sizes
    SAVPARAMS phase
    SETPARAMS phase
    SHUTDOWN phase
    start phase
        default
        specifying when invoking
    system parameters affected by
    system parameters affected by feedback
    TESTFILES phase
    when to run
AUTOGEN.PAR #1
AUTOGEN.PAR #2
AUTO_DLIGHT_SAV system parameter
AWSMIN system parameter
AWSTIME system parameter
B
Backlinks
    directory
        definition
BACKUP command #1
BACKUP command #2
    element lists
    format
    input specifier
    output specifier
    specifying wildcard characters
    types of qualifiers
    using with save sets
/BACKUP qualifier
    in Backup utility
Backup utility (BACKUP)
    command line qualifiers
    command line syntax
    compare operation for
    /DELETE qualifier
    directing output from
    exiting from
    improving the speed of
    invoking
    /JOURNAL qualifier
    list operation #1
    list operation #2
    list operation #3
    qualifiers
        command
        input file-selection
        input save-set
        output file
        output save-set
        position-dependent
    selective #1
    selective #2
    selective #3
    selective #4
    selective #5
    using to compare files
BALSETCNT system parameter
Batch execution
    on remote nodes
/BEFORE qualifier
    in Backup utility
/BEGINNING qualifier
    in Monitor utility
Binary output from Audit Analysis utility
Blocks
    erasing
/BLOCK_SIZE qualifier
    in Backup utility
Bootstrap operations
BORROWLIM system parameter
Break-in attempts
    LAT protocol
    Telnet Protocol
BREAKPOINTS system parameter
Brief format listings
/BRIEF qualifier
    in Backup utility
Brief report
    example
Buffers
    per-connection
        allocating
/BUFFER_COUNT qualifier
    in Backup utility
BUGCHECK
    dumps System Dump Priority processes early
    in-memory hardcoded list of priority processes
BUGCHECKFATAL system parameter
BUGREBOOT system parameter
Bus adapters
    generic names
    listing
    nexus numbers
    specifying #1
    specifying #2
Buses
    display on Alpha systems
/BY_NODE qualifier
    in Monitor utility
/BY_OWNER qualifier
    as Backup utility input file qualifier
    as Backup utility output file qualifier
    as Backup utility output save-set qualifier
C
Changing page, swap, and dump file sizes
Changing system parameters
    recommended method
CHANNELCNT system parameter
Checksumming
    enabling on VCs
CHECK_CLUSTER system parameter
CHECK_FEEDBACK mode
Circuit timer
CIRCUITS class
    adding
    fields belonging to
    removing
Class scheduler database
Classes
    SHOW CLUSTER
Classname qualifier
    in Monitor utility
        /ALL
        /CPU
        /ITEM #1
        /ITEM #2
        /TOPBIO
        /TOPCPU
        /TOPDIO
        /TOPFAULT
        /TOPRBS
CLASS_PROT system parameter
CLASS_SCHEDULE ADD command
    in SYSMAN
CLASS_SCHEDULE DELETE command
    in SYSMAN
CLASS_SCHEDULE MODIFY command
    in SYSMAN
CLASS_SCHEDULE RESUME command
    in SYSMAN
CLASS_SCHEDULE SHOW command
    in SYSMAN
CLASS_SCHEDULE SUSPEND command
    in SYSMAN
CLEAR DEVICE command
    in LANCP utility
CLEAR DLL command
    in LANCP utility
CLEAR NODE command
    in LANCP utility
CLISYMTBL system parameter
CLOCK_INTERVAL system parameter
CLOSE LOG command
    in LMCP
CLU$PARAMS.DAT file
CLUSTER class
    adding
    fields belonging to #1
    fields belonging to #2
    of data
    removing
CLUSTER class record
    in Monitor utility
Cluster performance statistics
    in Monitor utility
CLUSTER_AUTHORIZE.DAT files #1
CLUSTER_AUTHORIZE.DAT files #2
CLUSTER_AUTHORIZE.DAT files #3
CLUSTER_CONFIG.COM command procedure
CLUSTER_CREDITS system parameter
Command mode for Audit Analysis utility
    manipulating the display interactively #1
    manipulating the display interactively #2
    manipulating the display interactively #3
    manipulating the display interactively #4
Command procedures
    building
    control for SHOW CLUSTER output
    correcting system time
    executing #1
    executing #2
        in SYSMAN
    executing at system startup
    executing DCL commands with DO
    parameters for
Command summary
    of Authorize utility commands
Command syntax
Commands
    recalling
/COMMENT qualifier
    in Backup utility
    in Monitor utility
Compare operations
    for BACKUP
/COMPARE qualifier
    in Backup utility
CONCEAL_DEVICES system parameter
CONFIGURATION SET CLUSTER_AUTHORIZATION command
    in SYSMAN
CONFIGURATION SET TIME command
    in SYSMAN
CONFIGURATION SHOW CLUSTER_AUTHORIZATION command
    in SYSMAN
CONFIGURATION SHOW TIME command
    in SYSMAN
Configuration tables
    rebuilding on Alpha systems #1
    rebuilding on Alpha systems #2
CONFIGURE command
    in POLYCENTER Software Installation utility
    in SYSGEN
Configuring a printer
/CONFIRM qualifier
    in Analyze/Disk_Structure utility
    in Backup utility
CONNECT/ADAPTER command
    in SYSGEN
CONNECT command
    in Point-to-Point Protocol utility
CONNECT NODE command
    in LANCP utility
Connecting devices #1
Connecting devices #2
    on Alpha systems
Connections
    in LAT environment #1
    in LAT environment #2
    specifying type with LATCP
CONNECTIONS class
    adding or restoring
    fields belonging to
    removing
CONTINUE command
    in Audit Analysis utility
/CONTINUOUS qualifier
CONVERT command
    in Monitor utility
CONVERT DEVICE_DATABASE command
    in LANCP utility
CONVERT LOG command
    in LMCP
CONVERT NODE_DATABASE command
    in LANCP utility
/CONVERT qualifier
    in Backup utility
COPY command
    in Authorize utility
    in POLYCENTER Software Installation utility
Copying a software kit
Counters
    displaying
        for links
        for nodes
        for ports
        for services
    resetting
COUNTERS class
    adding
    fields belonging to
    removing
CPU power
    in LAT environment
Crash Log Utility Extractor (CLUE)
    commands
    DELETE command in
    DIRECTORY command in
    EXIT command in
    exiting from
    EXTRACT command in
    HELP command in
    invoking
    SHOW command in
/CRC qualifier
    as Backup utility input save-set qualifier
    as Backup utility output save-set qualifier
CRDENABLE system parameter
CRD_CONTROL system parameter
CREATE command
    in Install utility
    in SYSGEN
CREATE LINK command
    in LATCP
        illegal SCSSYSTEMID system parameter
CREATE LOG command
    in LMCP
CREATE PORT command
    in LATCP
CREATE/PROXY command
    in Authorize utility
CREATE/RIGHTS command
    in Authorize utility
CREATE SERVICE command
    in LATCP
/CREATED qualifier
    in Backup utility
Creating
    disk usage accounting files
Creator ACEs
    specifying access
    specifying attributes
CREDITS class
    adding
    fields belonging to
    removing
CSR (Control and Status Register)
    addresses #1
    addresses #2
        display on Alpha systems
    fixed space
    floating space
    vector addresses
CTLIMGLIM system parameter
CTLPAGES system parameter
CWCREPRC_ENABLE system parameter
D
Data collection
    by AUTOGEN
Data compaction
    TA90E support
Data field
Data link
    creating with LATCP
    modifying LAT characteristics of
    number supported by LAT software
Dates
    displaying in a cluster
DBGTK_SCRATCH system parameter
DCL commands
    in SYSMAN
DCL_CTLFLAGS system parameter
DEADLOCK_WAIT system parameter
DECdtm transaction manager
DECevent
DECevent utility
    /ANALYZE qualifier
    /BEFORE qualifier
    /BINARY qualifier
    /BRIEF qualifier
    brief report example
    /CONTINUOUS qualifier
    device classes
        excluding
        including
    device name
        excluding
        including
    device name constructs
    /DUMP qualifier
    /ENTRY qualifier
    entry type
        excluding
        including
    error log file
    events reported
        selecting date #1
        selecting date #2
        selecting time #1
        selecting time #2
    examples
        /BEFORE qualifier
    /EXCLUDE qualifier
    fast error report example
    /FSTERR qualifier
    /FULL qualifier
    full report example
    /INCLUDE qualifier
    informational messages
    /INTERACTIVE qualifier
    /INTERFACE qualifier
    /LOG qualifier
    /NODE qualifier
    output
        binary format
        directing #1
        directing #2
        directing #3
        directing #4
        file specification #1
        file specification #2
    output file
    /OUTPUT qualifier
    qualifiers
    /REJECTED qualifier
    report examples
    report formats
        binary #1
        binary #2
        binary #3
        brief #1
        brief #2
        brief #3
        fast error (FSTERR)
        full
        rejected entries
        reverse chronological order
        summary
        terse
    /REVERSE qualifier
    /SINCE qualifier
    /SUMMARY qualifier
    summary report example
    /TERSE qualifier
    terse report example
    /TRANSLATE qualifier
DECnet
    DECNET class record
        in Monitor utility
    LAT software
        effect of SCSSYSTEMID system parameter
DECservers
    changing device characteristics #1
    changing device characteristics #2
Dedicated port #1
Dedicated port #2
    displaying
DEFAULT command
    in Authorize utility
Default parameter file
Default protection
    for NET$PROXY.DAT
    for NETPROXY.DAT
    for RIGHTSLIST.DAT
    for SYSUAF.DAT
Default Protection ACEs #1
Default Protection ACEs #2
Default user authorization records
    modifying
DEFINE DEVICE command
    in LANCP utility
DEFINE/KEY command
    in LATCP
    in Show Cluster utility
    in SYSMAN
DEFINE NODE command
    in LANCP utility
Defining keys
    to execute SYSMAN commands
DEFMBXBUFQUO system parameter
DEFMBXMXMSG system parameter
DEFPRI system parameter
DEFQUEPRI system parameter
DEINSTALL command
    in SYSGEN
DELETE command
    in CLUE
    in Install utility
DELETE DEVICE command
    in UCM
DELETE LINK command
    in LATCP
DELETE PORT command
    in LATCP
/DELETE qualifier
    in Backup utility
DELETE QUEUE_ENTRY command
    in LATCP
DELETE RECOVERY_DATA command
    in POLYCENTER Software Installation utility
DELETE SERVICE command
    in LATCP
DELPRC_EXIT system parameter
/DENSITY qualifier
    in Backup utility
DESELECT command
    in Show Cluster utility
Device drivers
    addresses
    configuring #1
    configuring #2
    connecting
    displaying on Alpha systems
    loading #1
    loading #2
    loading #3
        on Alpha systems
    replacing with new version of
    showing configuration of
    showing information #1
    showing information #2
Device IDs
    Fibre Channel
        tape WWIDs #1
        tape WWIDs #2
        tape WWIDs #3
Device names
    specifying #1
    specifying #2
Device seed
Device table
Device types
    codes
    descriptions
Devices
    configuring
        VAXstation 2000 and MicroVAX 2000 devices
    connecting on Alpha systems #1
    connecting on Alpha systems #2
    displaying
        default
    excluding
    HP-supplied
    logical name translation
    SCSI and FC
        checking for changes in paths
    setting defaults for file specifications
    specifying quotas for
DEVICE_NAMING system parameter
DIAL_OUT command
    in Point-to-Point Protocol utility
Directing ANALYZE/DISK_STRUCTURE output
Directing SYSGEN output #1
Directing SYSGEN output #2
Directing SYSGEN output #3
Directories
    access to files created in
    and Default Protection ACEs
    assigning a Creator ACE to
    creating for a new account
    determining access to files created in
    ownership
        changing access to files
Directory backlinks
    definition
DIRECTORY command
    in CLUE
Directory default
    displaying
    modifying
Directory trees
    propagating UIC-based protection
    restoring
DISABLE command
    in SYSGEN
DISABLE_UPCALLS system parameter
DISCONNECT command
    in Point-to-Point Protocol utility
DISK class record
    in Monitor utility
Disk quotas
    creating
    disabling
    displaying
    file
        adding entry
        initializing usage count
    modifying an entry
    rebuilding
    removing an entry #1
    removing an entry #2
Disk statistics
    in Monitor utility
Disk usage accounting file
    creating
        example
Disk volumes
    repairing errors
    verification
DISKQUOTA ADD command
    in SYSMAN
DISKQUOTA CREATE command
    in SYSMAN
DISKQUOTA DELETE command
    in SYSMAN
DISKQUOTA DISABLE command
    in SYSMAN
DISKQUOTA ENABLE command
    in SYSMAN
DISKQUOTA MODIFY command
    in SYSMAN
DISKQUOTA REBUILD command
    in SYSMAN
DISKQUOTA REMOVE command
    in SYSMAN
DISKQUOTA SHOW command
    in SYSMAN
DISK_QUORUM system parameter
DISPLAY command
    in Audit Analysis utility
/DISPLAY qualifier
    in Monitor utility
Displays
    refreshing screen with LATCP
Displays from SHOW CLUSTER
    display formatting
Distributed lock management statistics
    in Monitor utility
DLCKEXTRASTK system parameter
DLOCK class record
    in Monitor utility
DNVOSI1 system parameter
DO command
    in SYSMAN
DORMANTWAIT system parameter
DOSD (dump off system disk)
    DUMPSTYLE system parameter
DR_UNIT_BASE system parameter
Dual-architecture OpenVMS Cluster systems
    installing images
        example
DUMP command
    in LMCP
Dump files
    changing size
    displaying the size calculated by AUTOGEN
    generating a new file sized by AUTOGEN
    setting priority
DUMPBUG system parameter
DUMPSTYLE system parameter
DUMP_PRIORITY ADD command
    in SYSMAN
DUMP_PRIORITY LIST command
    in SYSMAN
DUMP_PRIORITY LOAD command
    in SYSMAN
DUMP_PRIORITY MODIFY command
    in SYSMAN
DUMP_PRIORITY REMOVE command
    in SYSMAN
DUMP_PRIORITY SHOW command
    in SYSMAN
DUMP_PRIORITY UNLOAD command
    in SYSMAN
Dynamic attributes #1
Dynamic attributes #2
Dynamic attributes #3
Dynamic lock remastering statistics
    in Monitor utility
Dynamic parameters
    modifying #1
    modifying #2
Dynamic service rating #1
Dynamic service rating #2
    displaying #1
    displaying #2
E
EDIT/ACL command
EDIT keypad function #1
EDIT keypad function #2
Editing sessions
    keypad for ACL editing
ENABLE command
    in SYSGEN
END phase
End phase of AUTOGEN
    default
/ENDING qualifier
    in Monitor utility
Environment
    defining
        in SYSMAN
Erasing blocks #1
Erasing blocks #2
ERF
    See Error Log Report Formatter (ERF)
ERLBUFFERPAGES system parameter
Error Log Report Formatter (ERF)
    /BEFORE qualifier
    /BINARY qualifier
    /BRIEF qualifier
    buffered I/O count reporting
    device class
        excluding
        including
    device classes
    device name
        excluding
        including
    device name constructs
    direct I/O count reporting
    directing output
    /ENTRY qualifier
    entry type
        excluding
        including
    error log file
        specifying output
    events reported
        selecting date #1
        selecting date #2
        selecting time #1
        selecting time #2
    examples
        /BEFORE qualifier
        brief report
        machine check
        memory error
        nonfatal and user bugchecks
        time-stamp
        volume dismount
        volume mount
    /EXCLUDE qualifier
    execution time event reporting
    exiting from
    /FULL qualifier
    I/O events
        buffered
        direct
    /INCLUDE qualifier
    invoking
    /LOG qualifier
    messages
        informational
    /MODEL qualifier
    /NODE qualifier
    output
        ASCII format
        binary format
        directing #1
        directing #2
        directing #3
        directing #4
        file specification #1
        file specification #2
    output file
    /OUTPUT qualifier
    page faults reported
    /PAGE qualifier
    qualifiers
    /REGISTER_DUMP qualifier
    /REJECTED qualifier
    report format
        ASCII #1
        ASCII #2
        binary #1
        binary #2
        binary #3
        brief
        full
        hexadecimal longword
        register dump
        rejected entries
        run-time statistics #1
        run-time statistics #2
    restrictions
    sample error log report
    /SID_REGISTER qualifier
    /SINCE qualifier
    /STATISTICS qualifier
ERROR LOG utility
    See Error Log Report Formatter (ERF)
Error Log utility (ERROR LOG)
    See Error Log Report Formatter (ERF)
Error Log Viewer (ELV)
    brief report example
    CONVERT command
        qualifiers
    default report example
    DUMP command
        qualifiers
    event categories
        invalid
        rejected
        selected
        valid
    event classes
    event header information
    EXIT command
    full report example
    HELP command
    interactive shell mode
    invoking
    one-line-per-event report example
    report formats
        standard
        summary
    standard report detail levels
    standard report detail levels
        brief
        default
        full
        one-line-per-event
    supported event types
    terse format
    terse report example
    TRANSLATE command
        qualifiers
    WRITE command
        qualifiers
ERRORLOGBUFFERS system parameter
Errors
    repair #1
    repair #2
    repair #3
    repair #4
    repair #5
    reporting
ERRORS class
    adding
    fields belonging to
    removing
Event classes
    extracting audit records by
Event types
/EXACT_ORDER qualifier
    in Backup utility
Examples
    annotated
    comparing files
    creating a journal file
    image save operation
    incremental save operation
    initializing an output disk
    list operation
    of ANALYZE/DISK_STRUCTURE/SHADOW command
    protecting an output save-set
    repairing errors on a disk volume
    selective backup #1
    selective backup #2
    specifying a save-set label
    specifying block size
    specifying density for magnetic tape
    specifying redundancy group blocks
    using wildcard characters
/EXCLUDE qualifier
    in Backup utility
Excluding devices
Exclusion list
    displaying
EXECUTE command
    in Monitor utility
Execute procedure (@) command
    in LANCP utility
    in Show Cluster utility
    to set up SHOW CLUSTER format
Execution modes
    CHECK_FEEDBACK
    FEEDBACK
    INITIAL
    NOFEEDBACK
EXIT command
    in Audit Analysis utility
    in Authorize utility
    in CLUE
    in Install utility
    in LANCP utility
    in LATCP
    in Monitor utility
    in Point-to-Point Protocol utility
    in Show Cluster utility
    in SYSGEN
    in SYSMAN
    in UCM
EXPECTED_VOTES system parameter
/EXPIRED qualifier
    in Backup utility
EXTRACPU system parameter
EXTRACT command
    in CLUE
EXTRACT FILE command
    in POLYCENTER Software Installation utility
EXTRACT PDF command
    in POLYCENTER Software Installation utility
EXTRACT PTF command
    in POLYCENTER Software Installation utility
EXTRACT RELEASE_NOTES command
    in POLYCENTER Software Installation utility
EXUSRSTK system parameter
F
/FAST qualifier
    in Backup utility
FAST_PATH system parameter
FAST_PATH_PORTS system parameter
FCP class record
    in Monitor utility
FEEDBACK mode #1
FEEDBACK mode #2
Field of data
    definition
    definition of each
    removing
Fields
    SHOW CLUSTER
File backward link records
    in accounting files
File forward link records
    in accounting files
File primitive statistics
    in Monitor utility
File system cache (ACP) system parameters
    in Monitor utility
File system cache statistics
    monitoring
File types
    specifying for ACL editor
Files
    AGEN$FEEDBACK.DAT
    AGEN$FEEDBACK.EXE
    AGEN$PARAMS.REPORT
    ALPHAVMSSYS.OLD
    ALPHAVMSSYS.PAR
    AUTOGEN.PAR #1
    AUTOGEN.PAR #2
    AUTOGEN.PAR #3
    AUTOGEN.PAR #4
    containing AUTOGEN feedback
    containing list of known images
    controlling access to #1
    controlling access to #2
    creating
        dependency on directory ownership
        in a directory with a Default Protection ACE
    default parameter
    device driver
    for paging
    for swapping
    for system crash dumps
    format required by ACL editor
    I/O driver
    input of device list
    output cluster report #1
    output cluster report #2
    parameter #1
    parameter #2
    parameter #3
    PARAMS.DAT
    restoring
        to original directories
    SETPARAMS.DAT #1
    SETPARAMS.DAT #2
    SHOW_CLUSTER.LIS #1
    SHOW_CLUSTER.LIS #2
    startup
        disabling
        displaying
    startup command procedure #1
    startup command procedure #2
    startup command procedure #3
    SYSGEN session output #1
    SYSGEN session output #2
    SYSGTTSTR.MSG
    SYSMAN.LIS #1
    SYSMAN.LIS #2
    SYSMAN.LIS #3
    SYSMAN.LIS #4
    SYSMAN.LIS #5
    SYSMAN.LIS #6
    SYSMAN.LIS #7
    SYSMAN.LIS #8
    SYSMAN.LIS #9
    system parameter #1
    system parameter #2
    UIC-based protection
        propagating in a directory tree
    used by AUTOGEN command procedure
    VAXVMSSYS.OLD
    VAXVMSSYS.PAR #1
    VAXVMSSYS.PAR #2
    VMSIMAGES.DAT
    writing alarm messages to audit logs
/FILES_SELECTED qualifier
    in Backup utility
FILE_SYSTEM_CACHE class record
    in Monitor utility
FIND command
    in POLYCENTER Software Installation utility
Flags
    login #1
    login #2
    login #3
    login #4
Floating address
/FLUSH_INTERVAL qualifier
    in Monitor utility
Format for SHOW CLUSTER
    specifying processor types
Formats
    of software kits
        changing
FREEGOAL system parameter
FREELIM system parameter
FSTERR report
    example
/FULL qualifier
    in Backup utility
Full report
    example
Function keys
G
GALAXY system parameter
GBLPAGES system parameter
GBLPAGFIL system parameter
GBLSECTIONS system parameter
Generic names
    showing #1
    showing #2
GENFILES phase of AUTOGEN
GENPARAMS phase of AUTOGEN
GETDATA phase of AUTOGEN
GH_EXEC_CODE system parameter
GH_EXEC_DATA system parameter
GH_RES_CODE system parameter
GH_RES_DATA system parameter
GH_RSRVPGCNT system parameter
GLX_INST_TMO system parameter
GLX_SHM_REG system parameter
GRANT/IDENTIFIER command
    in Authorize utility
Group number
    cluster
        displaying
    local area cluster
Groups
    access to service nodes #1
    access to service nodes #2
    access to services in LAT environment
/GROUP_SIZE qualifier
    in Backup utility
GROWLIM system parameter
H
HANGUP characteristic
    application LAT devices
/HEADER_ONLY qualifier
    in Backup utility
Help
    online for Analyze Audit
HELP command
    in Audit Analysis utility
    in Authorize utility
    in CLUE
    in Install utility
    in LANCP utility
    in LATCP
    in LMCP
    in Monitor utility
    in Point-to-Point Protocol utility
    in Show Cluster utility
    in SYSMAN
    in UCM
HELP phase of AUTOGEN
History of installed software
Holder Hidden attribute #1
Holder Hidden attribute #2
Holder Hidden attribute #3
Home blocks
/HOMEBLOCKS qualifier
    in Analyze/Disk_Structure utility
I
I/O addresses
I/O class record
    in Monitor utility
I/O databases
    displaying on Alpha systems
I/O drivers
    loading
    replacing with new version of
I/O statistics
    in Monitor utility
ICBM (IOGEN Configuration Building Module) #1
ICBM (IOGEN Configuration Building Module) #2
ICBM (IOGEN Configuration Building Module) #3
Identifier ACEs
    types of identifiers
Identifiers
    default
    environmental
    general #1
    general #2
    granting #1
    granting #2
    granting to a process
    renaming
    resource
        and directory ownership
    revoking
    specifying characteristics of
    specifying multiple pairs of
    types
IEEE_ADDRESS system parameter
IEEE_ADDRESSH system parameter
/IGNORE qualifier
    in Backup utility
IJOBLIM system parameter
Image
    accounting #1
    accounting #2
    applying an ACE to
    authorized privileges #1
    authorized privileges #2
    header-resident #1
    header-resident #2
    privileged #1
    privileged #2
    privileged #3
    protecting installed #1
    protecting installed #2
Image backup
    definition
Image mode
/IMAGE qualifier
    in Backup utility
IMGIOCNT system parameter
IMGREG_PAGES system parameter
Incoming LAT connections
Incremental backup
    definition
Incremental mode
    restoring files
/INCREMENTAL qualifier
    in Backup utility
INITIAL mode
Initialization
    erasing home blocks
Initialization files
    creating
    default specification
    establishing SHOW CLUSTER reports
    use with SYSMAN
Initialization procedures
INITIALIZE command
    in Monitor utility
    in Show Cluster utility
/INITIALIZE qualifier
    in Backup utility
Input files
    security audit log files
/INPUT qualifier
    in Monitor utility
Input stream
    switching control to other processes
/INPUT_FILES qualifier
    in Backup utility
INSTALL command
    in POLYCENTER Software Installation utility
    in SYSGEN
Install utility (INSTALL)
    commands
        ADD
        CREATE
        DELETE
        EXIT
        HELP
        LIST
        PURGE
        REMOVE
        REPLACE
        TRANSLATE #1
        TRANSLATE #2
    exiting
    invoking
    /TRANSLATE qualifier
Installing software
    getting product information
    POLYCENTER Software Installation utility
    removing software
/INTERCHANGE qualifier
    in Backup utility
/INTERVAL qualifier
    in Monitor utility #1
    in Monitor utility #2
        relationship of qualifier and event
INTSTKPAGES system parameter
Invoking AUTOGEN
Invoking SYSGEN
Invoking SYSMAN
IO AUTOCONFIGURE command
    in SYSMAN
IO CONNECT command
    in SYSMAN
IO CREATE_WWID command
    in SYSMAN
IO FIND_WWID command
    in SYSMAN
IO LIST_WWID command
    in SYSMAN
IO LOAD command
    in SYSMAN
IO REBUILD command
    in SYSMAN
IO REPLACE_WWID command
    in SYSMAN
IO SCSI_PATH_VERIFY command
    in SYSMAN
IO SET EXCLUDE command
    in SYSMAN
IO SET PREFIX command
    in SYSMAN
IO SHOW BUS command
    in SYSMAN
IO SHOW DEVICE command
    in SYSMAN
IO SHOW EXCLUDE command
    in SYSMAN
IO SHOW PREFIX command
    in SYSMAN
IOGEN Configuration Building Module
    See ICBM
IOTA system parameter
IO_PREFER_CPUS system parameter
J
JBOBLIM system parameter
JOBCTLD system parameter
/JOURNAL qualifier
    in Backup utility
K
Keypad definitions #1
Keypad definitions #2
    SHOW CLUSTER
Keypad editing
    editing commands
    for ACL editor
    LK201-specific editing commands
Keys
    defining
    defining in LATCP
    defining in SYSMAN
    displaying definition
KFILSTCNT system parameter
Known file entries
Known file lists
Known images
    adding
    attributes of
    creating
    deleting
    evaluating merits of installing
    removing
    replacing
    substituting #1
    substituting #2
    updating #1
    updating #2
KSTACKPAGES system parameter
L
/LABEL qualifier
    in Backup utility
LAMAPREGS system parameter
LAN addresses
    displaying
LAN Control Program (LANCP) utility
    clearing counters
    commands
        CLEAR DEVICE
        CLEAR DLL
        CLEAR NODE
        CONNECT NODE
        CONVERT DEVICE_DATABASE
        CONVERT NODE_DATABASE
        DEFINE DEVICE
        DEFINE NODE
        @ (Execute Procedure)
        EXIT
        HELP
        LIST DEVICE
        LIST NODE
        PURGE DEVICE
        PURGE NODE
        SET ACP
        SET DEVICE
        SET NODE
        SHOW CONFIGURATION
        SHOW DEVICE
        SHOW DLL
        SHOW LOG
        SHOW NODE
        SPAWN
        TRIGGER NODE
    deleting device information #1
    deleting device information #2
    deleting node information #1
    deleting node information #2
    displaying node information #1
    displaying node information #2
    displaying OPCOM messages
    displaying status and counters #1
    displaying status and counters #2
    displaying status and counters #3
    exiting
    invoking
    MOP console carrier
    MOP trigger boot
    setting device information
LAN controllers
    address
    device name
    physical address
LANACP LAN Server process
    SET ACP command
LANCP (Local Area Network Control Program)
    See LAN Control Program (LANCP) utility
LANs (local area networks)
    clearing counters
    deleting device information #1
    deleting device information #2
    deleting node information #1
    deleting node information #2
    displaying LAN device parameters #1
    displaying LAN device parameters #2
    displaying node information #1
    displaying node information #2
    displaying OPCOM messages
    displaying status and counters #1
    displaying status and counters #2
    displaying status and counters #3
    LANCP SPAWN command
    MOP console carrier
    MOP trigger boot
    setting device information
LAN_FLAGS system parameter
Large buffers
LAT Control Program (LATCP) utility
    announcements
    exiting
    help
    invoking
    setting SCSSYSTEMID system parameter
LAT protocol
    Break-in attempts
LAT software
    changing DECserver characteristics #1
    changing DECserver characteristics #2
    characteristics
        added or changed
        storing
    connections #1
    connections #2
        incoming
        specifying type of
    device unit number
    devices
        changing HANGUP characteristic
    outgoing connections
    service
        creating
        database #1
        database #2
        deleting
        displaying characteristics of
        displaying counters
        displaying information
        identifier #1
        identifier #2
        identifier #3
        limiting size of node database #1
        limiting size of node database #2
        modifying characteristics of
        naming #1
        naming #2
        rating #1
        rating #2
        rating #3
        rating #4
    session limit #1
    session limit #2
    starting with SET NODE/STATE=ON
    stopping with SET NODE/STATE=OFF
LAT$STARTUP.COM command procedure
LCKMGR_CPUID system parameter
LGI system parameters
    LGI_BRK_DISUSER
    LGI_BRK_LIM
    LGI_BRK_TERM
    LGI_BRK_TMO
    LGI_CALLOUTS
    LGI_HID_TIM
    LGI_PWD_TMO
    LGI_RETRY_LIM
    LGI_RETRY_TMO
LICENSE LOAD command
    in SYSMAN
LICENSE UNLOAD command
    in SYSMAN
Licenses
    deactivating
Limited port #1
Limited port #2
Limited port #3
Limited port #4
Links
    creating with LATCP
    deleting with LATCP
    displaying characteristics using LATCP
    displaying counters using LATCP
    displaying information using LATCP
    modifying characteristics using LATCP
    name options in LATCP
    state of in LAT environment
LIST command
    in Audit Analysis utility
    in Authorize utility
    in Install utility
    in POLYCENTER Software Installation utility
LIST DEVICE command
    in LANCP utility
LIST/IDENTIFIER command
    in Authorize utility
LIST NODE command
    in LANCP utility
LIST/PROXY command
    in Authorize utility
/LIST qualifier
    in Analyze/Disk_Structure utility
    in Backup utility
LIST/RIGHTS command
    in Authorize utility
Listing
    network proxy database
    rights database #1
    rights database #2
    save-set information #1
    save-set information #2
    save-set information #3
    system user authorization file (SYSUAF)
LK201-specific editing commands
LNMPHASHTBL system parameter
LNMSHASHTBL system parameter
Load balancing #1
Load balancing #2
    and CPU power
LOAD command
    in SYSGEN
Loading device drivers
    on Alpha systems #1
    on Alpha systems #2
    on Alpha systems #3
Loading I/O driver
LOAD_PWD_POLICY system parameter
LOAD_SYS_IMAGES system parameter
Local area cluster environments
    setting system date and time
LOCAL_PORTS class
    adding
    fields belonging to
    removing
LOCK class record
    in Monitor utility
LOCKDIRWT system parameter
LOCKIDTBL system parameter
LOCKIDTBL_MAX system parameter
LOCKRETRY system parameter
/LOCK_VOLUME qualifier
    in Analyze/Disk_Structure utility
Log Manager Control Program (LMCP) utility
    CLOSE LOG command
    CONVERT LOG command
    CREATE LOG command
    DUMP command
    EXIT command
    HELP command
    REPAIR command
    SHOW LOG command
/LOG qualifier
    in Backup utility
Login command procedures
    LOGIN.COM
LONGWAIT system parameter
Lost files
    recovering
LPBEGIN phase of system startup
LPBETA phase of system startup
LPMAIN phase of system startup
LTA device
LTDRIVER (LAT port driver)
    turning on and off
M
Magnetic tape devices
    serving within a cluster
Management environment
    defining
MAXBOB* system parameters
MAXBOBMEM system parameter
MAXBUF system parameter
MAXCLASSPRI system parameter
MAXPROCESSCNT system parameter
MAXQUEPRI system parameter
MAXSYSGROUP system parameter
MC_SERVICES_P0 system parameter
MC_SERVICES_P1 system parameter
MC_SERVICES_P2 system parameter
MC_SERVICES_P3 system parameter
MC_SERVICES_P4 system parameter
MC_SERVICES_P5 system parameter
MC_SERVICES_P6 system parameter
MC_SERVICES_P7 system parameter
MC_SERVICES_P8 system parameter
MC_SERVICES_P9 system parameter
/MEDIA_FORMAT qualifier
    in Backup utility
MEMBERS class
    adding
    fields belonging to
    removing
Memory
    multiport
Memory reservations
    displays on running system
    frees on running system
MINCLASSPRI system parameter
MINWSCNT system parameter
MMG_CTLFLAGS system parameter
MODES class record
    in Monitor utility
Modes of execution
    for SYSMAN startup files
Modes of operation
    image
    physical
/MODIFIED qualifier
    in Backup utility
MODIFY command
    in Authorize utility
MODIFY DEVICE command
    in UCM
MODIFY/IDENTIFIER command
    in Authorize utility
MODIFY/PROXY command
    in Authorize utility
MODIFY/SYSTEM_PASSWORD command
    in Authorize utility
Modifying page, swap, and dump file sizes
Modifying system parameters
    recommended method
MONITOR ALL_CLASSES command
    in Monitor utility
MONITOR CLUSTER command
    in Monitor utility
MONITOR command
    in Monitor utility
MONITOR DECNET command
    in Monitor utility
MONITOR DISK command
    in Monitor utility
MONITOR DLOCK command
    in Monitor utility
MONITOR FCP command
    in Monitor utility
MONITOR FILE_SYSTEM_CACHE command
    in Monitor utility
MONITOR IO command
    in Monitor utility
MONITOR LOCK command
    in Monitor utility
MONITOR MODES command
    in Monitor utility
MONITOR MSCP_SERVER command
    in Monitor utility
MONITOR PAGE command
    in Monitor utility
MONITOR PROCESSES command
    in Monitor utility
MONITOR RLOCK command
    in Monitor utility
MONITOR RMS command
    in Monitor utility
MONITOR SCS command
    in Monitor utility
MONITOR STATES command
    in Monitor utility
MONITOR SYSTEM command
    in Monitor utility
MONITOR TIMER command
    in Monitor utility
MONITOR TRANSACTION command
    in Monitor utility
Monitor utility (MONITOR)
    classname qualifiers
        /ALL
        /CPU
        /ITEM #1
        /ITEM #2
        /TOPBIO
        /TOPCPU
        /TOPDIO
        /TOPFAULT
        /TOPRBS
    Cluster performance statistics
    collection interval
    command qualifiers
    commands
        CONVERT
        EXECUTE
        EXIT
        HELP
        INITIALIZE
        MONITOR
        MONITOR ALL_CLASSES
        MONITOR CLUSTER
        MONITOR DECNET
        MONITOR DISK
        MONITOR DLOCK
        MONITOR FCP
        MONITOR FILE_SYSTEM_CACHE
        MONITOR IO
        MONITOR LOCK
        MONITOR MODES
        MONITOR MSCP_SERVER
        MONITOR PAGE
        MONITOR PROCESSES
        MONITOR RLOCK
        MONITOR RMS
        MONITOR SCS
        MONITOR STATES
        MONITOR SYSTEM
        MONITOR TIMER
        MONITOR TRANSACTION
        MONITOR VBS
        MONITOR VECTOR
        SET DEFAULT
        SHOW DEFAULT
    directing output
    exiting
    invoking
    recording file record formats
    relationship of qualifier and event
MONITOR_SERVER process
    created on remote cluster node
    log file
    network startup
    purpose
    startup time
MOP downline load services
    clearing counters
    console carrier
    displaying status and counters #1
    displaying status and counters #2
    trigger boot
MOUNT command
    avoiding use of /CLUSTER with SYSMAN DO command
Mount error message
Mount verification
    forced by VERIFY utility
MOVE command
    in Show Cluster utility
MOVE keypad function
MPDEV_AFB_INTVL system parameter
MPDEV_D* system parameters
MPDEV_ENABLE system parameter
MPDEV_LCRETRIES system parameter
MPDEV_POLLER system parameter
MPDEV_REMOTE system parameter
MPW_HILIMIT system parameter
MPW_IOLIMIT system parameter
MPW_LOLIMIT system parameter
MPW_LOWAITLIMIT system parameter
MPW_PRIO system parameter
MPW_THRESH system parameter
MPW_WAITLIMIT system parameter
MPW_WRTCLUSTER system parameter
MSCP_BUFFER system parameter
MSCP_CMD_TMO system parameter
MSCP_CREDITS system parameter
MSCP_LOAD system parameter
MSCP_SERVER class record
    in Monitor utility
MSCP_SERVE_ALL system parameter
Multicast address
    cluster
        displaying
Multicast messages #1
Multicast messages #2
Multicast messages #3
    timer for
Multiport memory
    connecting
    initializing
    sharing
MULTIPROCESSING system parameter
MULTITHREAD system parameter
MVSUPMSG_INTVL system parameter
MVSUPMSG_NUM system parameter
MVTIMEOUT system parameter
N
Name Hidden attribute #1
Name Hidden attribute #2
Name Hidden attribute #3
NET$PROXY.DAT files
    description of
NETPROXY.DAT files
    creating
    description of
    displaying proxy access
    modifying
Network proxy authorization files
    creating
    modifying
Network statistics
    in Monitor utility
NET_CALLOUTS system parameter
NEWPARAMS.DAT file
    contents
/NEW_VERSION qualifier
    in Backup utility
NEXT FILE command
    in Audit Analysis utility
NEXT RECORD command
    in Audit Analysis utility
Nexus numbers
    showing #1
    showing #2
    showing #3
NISCS_CONV_BOOT system parameter
NISCS_LAN_OVRHD system parameter
NISCS_LOAD_PEA0 system parameter
NISCS_MAX_PKTSZ system parameter
NISCS_PORT_SERV system parameter
NJOBLIM system parameter
No Access attribute #1
No Access attribute #2
No Access attribute #3
/[NO]CONFIRM qualifier
    in Analyze/Disk_Structure utility
/[NO]LIST qualifier
    in Analyze/Disk_Structure utility
/[NO]LOCK_VOLUME qualifier
    in Analyze/Disk_Structure utility
/[NO]READ_CHECK qualifier
    in Analyze/Disk_Structure utility
/[NO]REPAIR qualifier
    in Analyze/Disk_Structure utility
NOAUTOCONFIG system parameter
NOCLUSTER system parameter
Node names
Node numbers
    display on Alpha systems
/NODE qualifier
    in Monitor utility
Nodes
    database #1
    database #2
    deleting node information #1
    deleting node information #2
    displaying characteristics of
    displaying counters
    displaying information using LATCP
    limit
    modifying characteristics of
    state
    target #1
    target #2
NOFEEDBACK mode
NOPGFLSWP system parameter
NPAGECALC system parameter
NPAGEDYN system parameter
NPAGERAD system parameter
NPAGEVIR system parameter
NPAG_AGGRESSIVE system parameter
NPAG_BAP_MAX system parameter
NPAG_BAP_MAX_PA system parameter
NPAG_BAP_MIN system parameter
NPAG_BAP_MIN_PA system parameter
NPAG_GENTLE system parameter
NPAG_INTERVAL system parameter
NPAG_RING_SIZE system parameter
O
Object classes
    security class object
Objects
    controlling access to
OPCOM (Operator Communication Manager)
    messages
        generated by LANACP
OpenVMS Cluster environments
    command execution
    DCL commands interacting with SYSMAN cluster commands
    displaying group number
    displaying multicast address
    displaying network information
    displaying system date and time
    dual-architecture
        installing images #1
        installing images #2
    group number
    modifying security data
    password
    setting time #1
    setting time #2
    updating security data
Operations
    compare
        for BACKUP
    list #1
    list #2
    list #3
    performed by BACKUP
Operator assistance
    with BACKUP
/OUTPUT qualifier
    in Monitor utility
/OVERLAY qualifier
    in Backup utility #1
    in Backup utility #2
/OWNER_UIC qualifier
    as Backup utility input file qualifier
P
PACKAGE command
    in POLYCENTER Software Installation utility
PAGE class record
    in Monitor utility
Page files
    changing size
    displaying the size calculated by AUTOGEN
    generating a new file sized by AUTOGEN
Page management statistics
    in Monitor utility
/PAGE=SAVE qualifier navigation keys
PAGEDYN system parameter
PAGFILCNT system parameter
PAGTBLPFC system parameter
PAMAXPORT system parameter
PAN command
    in Show Cluster utility
PAN keypad function
PANOPOLL system parameter
PANUMPOLL system parameter
PAPOLLINTERVAL system parameter
PAPOOLINTERVAL system parameter
Parameter files
    ALPHAVMSSYS.OLD
    ALPHAVMSSYS.PAR
    AUTOGEN.PAR #1
    AUTOGEN.PAR #2
    default
    VAXVMSSYS.OLD
    VAXVMSSYS.PAR
    writing #1
    writing #2
Parameters
    changing
    passing to command procedures
PARAMETERS DISABLE CHECKS command
    in SYSMAN
PARAMETERS ENABLE CHECKS command
    in SYSMAN
PARAMETERS SET command
    in SYSMAN
PARAMETERS SHOW command
    in SYSMAN
PARAMETERS USE command
    in SYSMAN
PARAMETERS WRITE command
    in SYSMAN
PARAMS.DAT file #1
PARAMS.DAT file #2
PASANITY system parameter
Password
    for OpenVMS Cluster
PASTDGBUF system parameter
Paste buffers
PASTIMOUT system parameter
PCFs (product configuration files)
    CONFIGURE subcommand
PDB (product database)
    recording a volume label change
PDFs (product description files)
    of software products
PE system parameter
PEDRIVER
    event-tracing facility
Per-connection buffers
    allocating
PFCDEFAULT system parameter
PFN_COLOR_COUNT system parameter
PFRATH system parameter
PFRATL system parameter #1
PFRATL system parameter #2
Phases of AUTOGEN
Physical mode
/PHYSICAL qualifier
    in Backup utility
PHYSICALPAGES system parameter
PHYSICAL_MEMORY system parameter
PIOPAGES system parameter
PIXSCAN system parameter
Point-to-Point Protocol utility (PPPD)
    commands
        CONNECT
        DIAL_OUT
        DISCONNECT
        EXIT
        HELP
        SET
        SHOW
    description
    exiting
    overview
POLYCENTER Software Installation utility
    commands
        CONFIGURE
        COPY
        DELETE RECOVERY_DATA
        EXTRACT FILE
        EXTRACT PDF
        EXTRACT PTF
        EXTRACT RELEASE_NOTES
        FIND
        INSTALL
        LIST
        PACKAGE
        RECONFIGURE
        REGISTER PRODUCT
        REGISTER VOLUME
        REMOVE
        SHOW HISTORY
        SHOW OBJECT
        SHOW PRODUCT
        SHOW RECOVERY_DATA
    invoking
    parameters
    See also PRODUCT command
POOLCHECK system parameter
POOLPAGING system parameter
Ports
    application #1
    application #2
    application #3
    application #4
    application #5
    characteristics
    counters #1
    counters #2
    creating with LATCP
    dedicated #1
    dedicated #2
    dedicated #3
    deleting with LATCP
    displaying characteristics of
    displaying information using LATCP
    limited #1
    limited #2
    limited #3
    limited #4
    logical name of
    modifying characteristics of with LATCP
    name
    outgoing connection
    setting type of
    target
POSITION command
    in Audit Analysis utility
POWEROFF system parameter
PPP connections
    establishing
    setting characteristics
    terminating
    viewing characteristics
PQL system parameters
    PQL_DASTLM
    PQL_DBIOLM
    PQL_DBYTLM
    PQL_DCPULM
    PQL_DDIOLM
    PQL_DENQLM
    PQL_DFILLM
    PQL_DJTQUOTA
    PQL_DPGFLQUOTA
    PQL_DPRCLM
    PQL_DTQELM
    PQL_DWSDEFAULT
    PQL_DWSEXTENT
    PQL_DWSQUOTA
    PQL_MASTLM
    PQL_MBIOLM
    PQL_MBYTLM
    PQL_MCPULM
    PQL_MDIOLM
    PQL_MENQLM
    PQL_MFILLM
    PQL_MJTQUOTA
    PQL_MPGFLQUOTA
    PQL_MPRCLM
    PQL_MTQELM
    PQL_MWSDEFAULT
    PQL_MWSEXTENT
    PQL_MWSQUOTA
PRCPOLINTERVAL system parameter
Prefix list
    displaying on Alpha systems
    setting on Alpha systems
Printers
    configuring in a LAT environment #1
    configuring in a LAT environment #2
PRIORITY_OFFSET system parameter
Privileges
    assigning to installed images #1
    assigning to installed images #2
    assigning to known images #1
    assigning to known images #2
    displaying current
    modifying for environment
    required by ACL editor
    required by SYSMAN
    to perform BACKUP operations
Process activity statistics
    in Monitor utility
Process states statistics
    in Monitor utility
Process types
    with Accounting utility
Processes
    granting identifiers to
    hibernating
        with ATTACH command
    switching control of input stream to
    transferring control from
PROCESSES class record
    in Monitor utility
Processor modes statistics
    in Monitor utility
PROCSECTCNT system parameter
PRODUCT command
    CONFIGURE subcommand
    COPY subcommand
    DELETE RECOVERY_DATA subcommand
    EXTRACT FILE subcommand
    EXTRACT PDF subcommand
    EXTRACT PTF subcommand
    EXTRACT RELEASE_NOTES subcommand
    FIND subcommand
    INSTALL subcommand
    LIST subcommand
    PACKAGE subcommand
    RECONFIGURE subcommand
    REGISTER PRODUCT subcommand
    REGISTER VOLUME subcommand
    REMOVE subcommand
    SHOW HISTORY subcommand
    SHOW OBJECT subcommand
    SHOW PRODUCT subcommand
    SHOW RECOVERY_DATA subcommand
    SHOW UTILITY subcommand
    UNDO PATCH subcommand
Profiles
    adjusting
    displaying
    in SYSMAN
Protection codes
    propagating UIC-based protection in a directory tree
/PROTECTION qualifier
    in Backup utility
Protocol bit mask
    error definitions
Proxy accounts
    adding
    deleting
    modifying
Proxy logins #1
Proxy logins #2
PSEUDOLOA system parameter
PTFs (product text files)
    of software products
PURGE command
    in Install utility
PURGE DEVICE command
    in LANCP utility
PURGE NODE command
    in LANCP utility
PU_OPTIONS system parameter
Q
QBUS_MULT_INTR system parameter
QDSKINTERVAL system parameter
QDSKVOTES system parameter
QUANTUM system parameter
Quota file
    creating
    disabling
    displaying
    enabling
    modifying
    removing an entry #1
    removing an entry #2
    updating
R
RAD example
RAD_SUPPORT system parameter
Range checking
    disabling
    enabling
/READ_CHECK qualifier
    in Analyze/Disk_Structure utility
REALTIME_SPTS system parameter
REBOOT phase of AUTOGEN
Rebuilding configuration tables
    on Alpha systems
RECALL command
    in LATCP
RECNXINTERVAL system parameter
RECONFIGURE command
    in POLYCENTER Software Installation utility
/RECORD qualifier
    in Backup utility
    in Monitor utility
Record types
    in Monitor utility
Recording files
    class types
    in Monitor utility
        class header
        class prefix for component classes
        class records
        data block
        description
        file header record
        HP control records
        I/O class record
        node transition record
        RLOCK class record
        RMS class record
        RMS file record
        SCS class record
        system information record
Records
    duplicating
/RECORD_ATTRIBUTES qualifier
    in Analyze/Disk_Structure utility
Recovering lost files
REFRESH command
    in LATCP
    in Show Cluster utility
REGISTER PRODUCT command
    in POLYCENTER Software Installation utility
REGISTER VOLUME command
    in POLYCENTER Software Installation utility
Release Notes
    on software products
/RELEASE_TAPE qualifier
    in Backup utility
RELOAD command
    in SYSGEN
    in UCM
Remote nodes
    creating MONITOR_SERVER process on
REMOVE CIRCUITS command
    in Show Cluster utility
REMOVE CLUSTER command
    in Show Cluster utility
REMOVE command
    in Authorize utility
    in Install utility
    in POLYCENTER Software Installation utility
REMOVE CONNECTIONS command
    in Show Cluster utility
REMOVE COUNTERS command
    in Show Cluster utility
REMOVE CREDITS command
    in Show Cluster utility
REMOVE ERRORS command
    in Show Cluster utility
REMOVE (Field) command
    in Show Cluster utility
REMOVE/IDENTIFIER command
    in Authorize utility
REMOVE LOCAL_PORTS command
    in Show Cluster utility
REMOVE MEMBERS command
    in Show Cluster utility
REMOVE/PROXY command
    in Authorize utility
REMOVE SYSTEMS command
    in Show Cluster utility
Removing installed software products
RENAME command
    in Authorize utility
RENAME/IDENTIFIER command
    in Authorize utility
REPAIR command
    in LMCP
/REPAIR qualifier
    in Analyze/Disk_Structure utility
Repairing errors #1
Repairing errors #2
Repairing errors #3
Repairing errors #4
Repairing errors #5
REPLACE command
    in Install utility
/REPLACE qualifier
    in Backup utility
Report formats from Audit Analysis utility
    brief
    full
    summary
Reporting errors
Reports
    SHOW CLUSTER
        command to modify
        controlling displays #1
        controlling displays #2
        default display
        formatting
        organization of
        printing
        time period for #1
        time period for #2
        update interval #1
        update interval #2
Requirements and limitations
    in ANALYZE/DISK_STRUCTURE
RESALLOC system parameter
Reserved Memory Registry
    adding an entry
    adding RADs to a reservation
    AUTOGEN processes
    modifying an existing entry
    previews reservation
    removing an entry
RESERVED_MEMORY commands
    in SYSMAN
RESERVED_MEMORY EXTEND command
RESERVED_MEMORY FREE command
RESERVED_MEMORY LIST command
RESERVED_MEMORY MODIFY command
RESERVED_MEMORY REMOVE command
RESERVED_MEMORY SHOW command
RESHASHTBL system parameter
Resource accounting
    programming information
Resource attributes #1
Resource attributes #2
Resource attributes #3
Resource use
    producing reports of #1
    producing reports of #2
    producing reports of #3
RESTART command
    in UCM
Retransmit limit
REVOKE/IDENTIFIER command
    in Authorize utility
/REWIND qualifier
    as Backup utility input save-set qualifier
    as Backup utility output save-set qualifier
Rights identifier
    for disk quota file
RIGHTSLIST.DAT files
    adding identifiers to
    altering identifiers in
    creating and maintaining #1
    creating and maintaining #2
    deleting identifiers from
    displaying identifiers in
    displaying records in
    renaming identifiers
RJOBLIM system parameter
RLOCK class record
    in Monitor utility
RMS class record
    in Monitor utility
RMS statistics
    in Monitor utility
RMS system parameters
    RMSD*
    RMS_CONPOLICY
    RMS_DFLRL
    RMS_DFMBC
    RMS_DFMBFIDX
    RMS_DFMBFREL
    RMS_DFMBFSDK
    RMS_DFMBFSMT
    RMS_DFMBFSUR
    RMS_DFNBC
    RMS_EXTEND_SIZE
    RMS_FILEPROT
    RMS_HEURISTIC
    RMS_PROLOGUE
    RMS_SEQFILE_WBH
RSRVPAGCNT system parameter
S
S0_PAGING system parameter
S2_SIZE system parameter
SAVE command
    in Show Cluster utility
Save-set specification
Save sets
    description of
    directing output to
SAVEDUMP system parameter
/SAVE_SET qualifier
    as Backup utility input save-set qualifier
    as Backup utility output save-set qualifier
SAVPARAMS phase of AUTOGEN
SA_APP system parameter
SBIERRENABLE system parameter
SCA Control Program (SCACP)
    commands
        EXIT
        HELP
        SET CHANNEL
        SET CIRCUIT
        SET LAN_DEVICE
        SET PORT
        SET TRACE
        SET VC
        SHOW CHANNEL
        SHOW CIRCUIT
        SHOW LAN_DEVICE
        SHOW PORT
        SHOW TRACE
        SHOW VC
        SPAWN
        START LAN_DEVICE
        START TRACE
        STOP LAN_DEVICE
        STOP TRACE
    event tracing
    invoking
    LAN channels
    LAN circuits
    LAN cluster ports
    overview
    PEDRIVER (LAN cluster driver)
    privileges required
    terminology
        SCA
    troubleshooting with
    virtual circuits
SCA (Systems Communications Architecture)
    in SCACP utility
    paths (equivalent to circuits)
SCACP
    See SCA Control Program
SCBs (storage control blocks)
    updating
Scheduling classes
    creating
    deleting
    displaying
    modifying characteristics
    resuming suspended classes
    suspending temporarily
SCH_CTLFLAGS system parameter
Screens
    refreshing from LATCP
SCROLL command
    in LATCP
    in Show Cluster utility
SCROLL keypad function
SCS class record
    in Monitor utility
SCS statistics
    in Monitor utility
SCS system parameters
    SCSBUFFCNT
    SCSCONNCNT
    SCSFLOWCUSH
    SCSMAXDG
    SCSMAXMSG
    SCSNODE
    SCSRESPCNT
    SCSSYSTEMID
    SCSSYSTEMIDH
SCS (Systems Communications Services)
    circuits and ports in SCACP utility
    SHOW CLUSTER information
SCSICLUSTER_P[1-4] system parameter
SCSI_NOAUTO system parameter
SCSSYSTEMID system parameter
    and LATCP CREATE LINK command
Security alarm messages
    specifying access criteria for #1
    specifying access criteria for #2
Security archive files, analyzing
Security audit data packets
    fields
    format
Security audit event messages
    data packets in
    event flags
    extracting from log files
    format
    subtypes for events
    types of events
Security audit header packets
Security audit log files
    advancing to next record
    analyzing #1
    analyzing #2
    data packet format
    displaying records
    displaying the full record
    excluding information from reports
    header packet format
    opening new input file
    resuming processing
    returning to previous record
    selecting records by event class
    selecting records by time #1
    selecting records by time #2
    specifying duration of record display
    writing alarm messages to
Security audit records
    criteria for selecting
Security audit reports
    advancing the display
    binary output
    brief format
    creating
    directing output
    displaying selection criteria
    duration of record display
    excluding information
    full format
    interrupting the display
    modifying selection criteria
    processing additional log files
    resuming the processing
    summary of records
Security event classes
    extracting audit records by
Security objects
    classes
Security operators
    sending alarm messages to audit log files
    sending alarm messages to terminals
SECURITY_POLICY system parameter
SELECT command
    in Show Cluster utility
/SELECT qualifier
    in Backup utility
Service node
    controlling access to #1
    controlling access to #2
    deleting a port
    modifying characteristics of #1
    modifying characteristics of #2
    naming
    service announcements #1
    service announcements #2
Services
    application #1
    application #2
    application #3
    application #4
    application #5
    application #6
    creating with LATCP
    database #1
    database #2
    deleting with LATCP
    displaying characteristics of
    displaying counters
    displaying information using LATCP
    general timesharing
    identifier #1
    identifier #2
    identifier #3
    limiting size of node database #1
    limiting size of node database #2
    modifying characteristics of
    naming with LATCP #1
    naming with LATCP #2
    rating #1
    rating #2
    rating #3
    rating #4
    responder
    target
Session limit
Sessions
    terminating
SET ACP command
    in LANCP utility
SET AUDIT command
    recording alarm messages
SET AUTO_POSITIONING command
    in Show Cluster utility
SET command
    (Field)
    in Point-to-Point Protocol utility
    in SYSGEN
SET DEFAULT command
    in Monitor utility
SET DEVICE command
    in LANCP utility
SET ENVIRONMENT command
    in SYSMAN
SET FUNCTION command
    in Show Cluster utility
SET INTERVAL command
    in Show Cluster utility
SET LINK command
    in LATCP
SET LOG command
    in UCM
SET NODE command
    in LANCP utility
    in LATCP
SET/OUTPUT command
    in SYSGEN
SET PORT command
    in LATCP
SET PROFILE command
    in SYSMAN
SET QUORUM command
    avoiding use of /CLUSTER with SYSMAN DO command
SET SCREEN command
    in Show Cluster utility
SET SECURITY command
    /CLASS qualifier
    specifying object class
SET SECURITY/EDIT command #1
SET SECURITY/EDIT command #2
SET SERVICE command
    in LATCP
SET/STARTUP command
    in SYSGEN
SET TIMEOUT command
    in SYSMAN
SETPARAMS.DAT file #1
SETPARAMS.DAT file #2
SETPARAMS phase of AUTOGEN
SETTIME system parameter
Setting page, swap, and dump file sizes
/SHADOW qualifier
    in Analyze/Disk_Structure utility
Shadow sets
    detecting errors
    examining
    maximum number of
SHADOWING system parameter
SHADOW_D1-D5 system parameter
SHADOW_MAX_COPY system parameter
SHADOW_MAX_UNIT system parameter
SHADOW_MBR_TMO system parameter
SHADOW_REC_DLY system parameter
SHADOW_SYS_DISK system parameter
SHADOW_SYS_TMO system parameter
SHADOW_SYS_UNIT system parameter
SHADOW_SYS_WAIT system parameter
SHARE command
    in SYSGEN
SHARE/INITIALIZE command
    in SYSGEN
SHOW/ADAPTER command
    in SYSGEN
SHOW/BUS command
    in SYSGEN
SHOW CLUSTER command
    in Show Cluster utility
    initialization file
    keypad commands
Show Cluster utility (SHOW CLUSTER)
    activation time #1
    activation time #2
    activation time #3
    activation time #4
    classes of data
    commands
    continuous mode #1
    continuous mode #2
    controlling displays
    data fields
    defining arrow keys
    defining keypad keys #1
    defining keypad keys #2
    deselecting window
    directing output
    Execute Procedure (@) command
    exiting #1
    exiting #2
    invoking
    keypad
    moving display window #1
    moving display window #2
    /OUTPUT qualifier
    panning display window
    qualifiers
    refreshing the display
    removing display information
    resetting display information
    sample display
    scrolling display window #1
    scrolling display window #2
    selecting display fields
        CIRCUITS class
        CLUSTER class
        CONNECTIONS class
        COUNTERS class
        CREDITS class
        ERRORS class
        LOCAL_PORTS class
        MEMBERS class
        SYSTEMS class
    selecting display window
SHOW command
    in Audit Analysis utility
    in Authorize utility
    in CLUE
    in Point-to-Point Protocol utility
    in SYSGEN
SHOW CONFIGURATION command
    in LANCP utility
SHOW/CONFIGURATION command
    in SYSGEN
SHOW DEFAULT command
    in Monitor utility
SHOW DEVICE command
    in LANCP utility
SHOW/DEVICE command
    in SYSGEN
SHOW DEVICE command
    in UCM
SHOW DLL command
    in LANCP utility
SHOW/DRIVER command
    in SYSGEN
SHOW ENVIRONMENT command #1
SHOW ENVIRONMENT command #2
    in SYSMAN
SHOW HISTORY command
    in POLYCENTER Software Installation utility
SHOW/IDENTIFIER command
    in Authorize utility
SHOW KEY command
    in SYSMAN
SHOW LINK command
    in LATCP
SHOW LOG command
    in LANCP utility
    in LMCP
SHOW NODE command
    in LANCP utility
    in LATCP
SHOW OBJECT command
    in POLYCENTER Software Installation utility
SHOW PORT command
    in LATCP
SHOW PRODUCT command
    in POLYCENTER Software Installation utility
SHOW PROFILE command
    in SYSMAN
SHOW/PROXY command
    in Authorize utility
SHOW QUEUE_ENTRY command
    in LATCP
SHOW RECOVERY_DATA command
    in POLYCENTER Software Installation utility
SHOW/RIGHTS command
    in Authorize utility
SHOW SERVICE command
    in LATCP
SHOW/STARTUP command
SHOW TIMEOUT command
    in SYSMAN
SHOW/TURBOCHANNEL command
    in SYSGEN
SHOW/UNIBUS command
    in SYSGEN
SHOW UTILITY command
    in POLYCENTER Software Installation utility
SHOW_CLUSTER$INIT logical name
SHOW_CLUSTER$INIT:SHOW_CLUSTER.INI initialization file
SHUTDOWN NODE command
    in SYSMAN
SHUTDOWN phase of AUTOGEN
/SINCE qualifier
    in Backup utility
SMCI_FLAGS system parameter
SMCI_PORTS system parameter
SMP_CPUS system parameter
SMP_CPUSH system parameter
SMP_LNGSPINWAIT system parameter
SMP_SANITY_CNT system parameter
SMP_SPINWAIT system parameter
SMP_TICK_CNT system parameter
Software
    listing
        POLYCENTER Software Installation utility
Software products
    files of
        deleting recovery data
        extracting
    removing
SPAWN command
    and ATTACH command
    in LANCP utility
    in LATCP
    in SYSMAN
SPTREQ system parameter
SSINHIBIT system parameter
Stage checks
Standalone BACKUP
Start phase of AUTOGEN
    default
Startup
    logging
    phase
    status
STARTUP ADD command
    in SYSMAN
Startup command procedure #1
Startup command procedure #2
Startup command procedure #3
    setting the name
    site-independent file name
Startup database
    establishing
    files
        adding
        deleting
        disabling
        enabling
        modifying
    setting the default
STARTUP DISABLE command
    in SYSMAN
STARTUP ENABLE command
    in SYSMAN
STARTUP MODIFY command
    in SYSMAN
STARTUP REMOVE command
    in SYSMAN
STARTUP SET DATABASE command
    in SYSMAN
STARTUP SET OPTIONS command
    in SYSMAN
STARTUP SHOW command
    in SYSMAN
STARTUP$STARTUP_LAYERED logical name
STARTUP$STARTUP_VMS logical name
STARTUP_Pn system parameters
    in SYSMAN
STATES class record
    in Monitor utility #1
    in Monitor utility #2
Static service rating #1
Static service rating #2
    displaying #1
    displaying #2
Statistical information
    about volume under verification
/STATISTICS qualifier
    in Analyze/Disk_Structure utility
STATS.DAT file
    created by ANALYZE/DISK_STRUCTURE/STATISTICS
Subprocesses
    creating
        from LATCP #1
        from LATCP #2
        with SPAWN command
        with the LANCP SPAWN command
    switching control of input stream to
Subsystem ACEs
    example
    specifying identifier characteristics
    specifying identifiers
Subsystem attribute #1
Subsystem attribute #2
Subsystem attribute #3
Subsystems
    controlling access to
/SUMMARY qualifier
    in Monitor utility
Summary report
    example
Swap files
    changing size
    displaying the size calculated by AUTOGEN
    generating a new file sized by AUTOGEN
SWPALLOCINC system parameter
SWPFAIL system parameter
SWPFILCNT system parameter
SWPOUTPGCNT system parameter
SWPRATE system parameter
SWP_PRIO system parameter
Symbol table
    command interpreter
Syntax
    of BACKUP commands
SYS$SYSTEM:STARTUP.COM command procedure
SYSALF.DAT database in SYSMAN
SYSBOOT facility
    using during bootstrap operations
SYSLOST.DIR file
SYSMANINI.INI file
    changing file specification
SYSMWCNT system parameter
SYSPFC system parameter
SYSTEM class record
    in Monitor utility
System Dump Priority registry
    adding records
    description
    displaying an in-memory copy of the file
    interaction with BUGCHECK
    listing records
    loading contents of file into memory
    modifying an entry in the file
    removing an entry in the file
    unloading an in-memory copy of the file
System Generation utility (SYSGEN)
    assign parameter values
    commands
        AUTOCONFIGURE
        CONFIGURE
        CONNECT/ADAPTER
        CREATE
        DEINSTALL
        DISABLE
        ENABLE
        INSTALL
        LOAD
        RELOAD
        SET
        SET/OUTPUT
        SET/STARTUP
        SHARE
        SHARE/INITIALIZE
        SHOW
        SHOW/ADAPTER
        SHOW/BUS
        SHOW/CONFIGURATION
        SHOW/DEVICE
        SHOW/DRIVER
        SHOW/STARTUP
        SHOW/TURBOCHANNEL
        SHOW/UNIBUS
        TERMINAL
        USE
        WRITE
    directing output #1
    directing output #2
    showing parameter values
    specifying file output #1
    specifying file output #2
    work area #1
    work area #2
    work area #3
System loadable image
    adding
    removing
System management
    clearing counters
    creating disk quota files
    defining target system
    deleting device information #1
    deleting device information #2
    deleting node information #1
    deleting node information #2
    displaying LAN device parameters #1
    displaying LAN device parameters #2
    displaying node information #1
    displaying node information #2
    displaying OPCOM messages
    displaying status and counters #1
    displaying status and counters #2
    displaying status and counters #3
    displaying target environment
    displaying user profile
    displaying wait time for node response
    invoking the LANCP utility
    LANCP SPAWN command
    limiting response time
    MOP console carrier
    MOP trigger boot
    setting device information
    setting wait time for node response
    SYSMAN tasks
System Management utility (SYSMAN)
    commands
        ALF ADD
        ALF REMOVE
        ALF SHOW
        ATTACH
        CLASS_SCHEDULE
        CONFIGURATION SET CLUSTER_AUTH
        CONFIGURATION SET TIME
        CONFIGURATION SHOW CLUSTER_AUTHORIZATION
        CONFIGURATION SHOW TIME
        DEFINE/KEY
        DISKQUOTA ADD
        DISKQUOTA CREATE
        DISKQUOTA DELETE
        DISKQUOTA DISABLE
        DISKQUOTA ENABLE
        DISKQUOTA MODIFY
        DISKQUOTA REBUILD
        DISKQUOTA REMOVE
        DISKQUOTA SHOW
        DO
        DUMP_PRIORITY ADD
        DUMP_PRIORITY LIST
        DUMP_PRIORITY LOAD
        DUMP_PRIORITY MODIFY
        DUMP_PRIORITY REMOVE
        DUMP_PRIORITY SHOW
        DUMP_PRIORITY UNLOAD
        EXIT
        HELP
        IO AUTOCONFIGURE
        IO CONNECT
        IO CREATE_WWID
        IO FIND_WWID
        IO LIST_WWID
        IO LOAD
        IO REBUILD
        IO REPLACE_WWID
        IO SCSI_PATH_VERIFY
        IO SET EXCLUDE
        IO SET PREFIX
        IO SHOW BUS
        IO SHOW DEVICE
        IO SHOW EXCLUDE
        IO SHOW PREFIX
        LICENSE LOAD
        LICENSE UNLOAD
        PARAMETERS DISABLE CHECKS
        PARAMETERS ENABLE CHECKS
        PARAMETERS SET
        PARAMETERS SHOW
        PARAMETERS USE
        PARAMETERS WRITE
        RESERVED_MEMORY ADD
        RESERVED_MEMORY EXTEND
        RESERVED_MEMORY FREE
        RESERVED_MEMORY LIST
        RESERVED_MEMORY MODIFY
        RESERVED_MEMORY REMOVE
        RESERVED_MEMORY SHOW
        SET ENVIRONMENT
        SET PROFILE
        SET TIMEOUT
        SHOW ENVIRONMENT
        SHOW KEY
        SHOW PROFILE
        SHOW TIMEOUT
        SHUTDOWN NODE
        SPAWN
        STARTUP ADD
        STARTUP DISABLE
        STARTUP ENABLE
        STARTUP MODIFY
        STARTUP REMOVE
        STARTUP SET DATABASE
        STARTUP SET OPTIONS
        STARTUP SHOW
        SYS_LOADABLE ADD
        SYS_LOADABLE REMOVE
    common tasks
    executing a command procedure
    executing SYSMAN commands
    exiting from
    initialization file
    invoking
    overview
    privilege requirements
    restrictions
    rights identifiers
System overview statistics
    in Monitor utility
System parameters
    ACP
    affected by AUTOGEN calculations
    affected by AUTOGEN feedback
    categories
    changing
        recommended method
    changing during installation
    checking
    checking AUTOGEN's settings
    default parameter file #1
    default parameter file #2
    descriptions
    disabling checking
    displaying
        device configuration
        device driver addresses
        I/O subsystems
        parameter values
        startup procedure
        UNIBUS I/O addresses
        values
    Login security #1
    Login security #2
    modifying
        recommended method
    NPAGECALC
    process limits and quotas
    RMS #1
    RMS #2
    setting
        parameter addresses
        parameter values #1
        parameter values #2
        parameter values #3
        parameter values #4
        parameter values #5
        recommended method
    sharing multiport memory
    showing
    specifying startup procedure #1
    specifying startup procedure #2
    specifying startup procedure #3
    summary #1
    summary #2
    Systems Communications Services
    terminal behavior
    VIRTUALPAGECNT #1
    VIRTUALPAGECNT #2
    VMS
    work area #1
    work area #2
    writing contents of
    writing to file
System passwords
System shutdown
    to install changed system parameters #1
    to install changed system parameters #2
System time
    setting
SYSTEMS class
    adding or restoring
    fields belonging to
    removing
SYSTEM_CHECK system parameter
SYSUAF logical name
    defining
SYSUAFs (system user authorization files)
    creating
    default directory entry
    default values
    displaying records in
    modifying
    recreating
    renaming records
SYS_LOADABLE ADD command
    in SYSMAN
SYS_LOADABLE REMOVE command
    in SYSMAN


Previous Next Contents Index