[an error occurred while processing this directive]

HP OpenVMS Systems Documentation

Content starts here

HP OpenVMS System Management Utilities Reference Manual


Previous Contents Index

S
S0_PAGING system parameter
S2_SIZE system parameter
SAVE command
    in Show Cluster utility
Save-set specification
Save sets
    description of
    directing output to
SAVEDUMP system parameter
/SAVE_SET qualifier
    as Backup utility input save-set qualifier
    as Backup utility output save-set qualifier
SAVPARAMS phase of AUTOGEN
SCA Control Program (SCACP)
    commands
        EXIT
        HELP
        SET CHANNEL
        SET CIRCUIT
        SET LAN_DEVICE
        SET PORT
        SET TRACE
        SET VC
        SHOW CHANNEL
        SHOW CIRCUIT
        SHOW LAN_DEVICE
        SHOW PORT
        SHOW TRACE
        SHOW VC
        SPAWN
        START LAN_DEVICE
        START TRACE
        STOP LAN_DEVICE
        STOP TRACE
    event tracing
    invoking
    LAN channels
    LAN circuits
    LAN cluster ports
    overview
    PEDRIVER (LAN cluster driver)
    privileges required
    terminology
        SCA
    troubleshooting with
    virtual circuits
SCA (Systems Communications Architecture)
    in SCACP utility
    paths (equivalent to circuits)
SCACP
    See SCA Control Program
SCBs (storage control blocks)
    updating
Scheduling classes
    creating
    deleting
    displaying
    modifying characteristics
    resuming suspended classes
    suspending temporarily
SCH_CTLFLAGS system parameter
Screens
    refreshing from LATCP
SCROLL command
    in LATCP
    in Show Cluster utility
SCROLL keypad function
SCS class record
    in Monitor utility
SCS statistics
    in Monitor utility
SCS system parameters
    SCSBUFFCNT
    SCSFLOWCUSH
    SCSMAXDG
    SCSMAXMSG
    SCSNODE
    SCSRESPCNT
    SCSSYSTEMID
    SCSSYSTEMIDH
SCS (Systems Communications Services)
    circuits and ports in SCACP utility
    SHOW CLUSTER information
SCSICLUSTER_P[1-4] system parameter
SCSI_ERROR_POLL system parameter
SCSI_NOAUTO system parameter
SCSSYSTEMID system parameter
    and LATCP CREATE LINK command
Security alarm messages
    specifying access criteria for #1
    specifying access criteria for #2
Security archive files, analyzing
Security audit data packets
    fields
    format
Security audit event messages
    data packets in
    event flags
    extracting from log files
    format
    subtypes for events
    types of events
Security audit header packets
Security audit log files
    advancing to next record
    analyzing #1
    analyzing #2
    data packet format
    displaying records
    displaying the full record
    excluding information from reports
    header packet format
    opening new input file
    resuming processing
    returning to previous record
    selecting records by event class
    selecting records by time #1
    selecting records by time #2
    specifying duration of record display
    writing alarm messages to
Security audit records
    criteria for selecting
Security audit reports
    advancing the display
    binary output
    brief format
    creating
    directing output
    displaying selection criteria
    duration of record display
    excluding information
    full format
    interrupting the display
    modifying selection criteria
    processing additional log files
    resuming the processing
    summary of records
Security event classes
    extracting audit records by
Security objects
    classes
Security operators
    sending alarm messages to audit log files
    sending alarm messages to terminals
SECURITY_POLICY system parameter
SELECT command
    in Show Cluster utility
/SELECT qualifier
    in Backup utility
Service node
    controlling access to #1
    controlling access to #2
    deleting a port
    modifying characteristics of #1
    modifying characteristics of #2
    naming
    service announcements #1
    service announcements #2
Services
    application #1
    application #2
    application #3
    application #4
    application #5
    application #6
    creating with LATCP
    database #1
    database #2
    deleting with LATCP
    displaying characteristics of
    displaying counters
    displaying information using LATCP
    general timesharing
    identifier #1
    identifier #2
    identifier #3
    limiting size of node database #1
    limiting size of node database #2
    modifying characteristics of
    naming with LATCP #1
    naming with LATCP #2
    rating #1
    rating #2
    rating #3
    rating #4
    responder
    target
Session limit
Sessions
    terminating
SET ACP command
    in LANCP utility
SET AUDIT command
    recording alarm messages
SET AUTO_POSITIONING command
    in Show Cluster utility
SET command
    (Field)
    in Point-to-Point Protocol utility
    in SYSGEN
SET DEFAULT command
    in Monitor utility
SET DEVICE command
    in LANCP utility
SET ENVIRONMENT command
    in SYSMAN
SET FUNCTION command
    in Show Cluster utility
SET INTERVAL command
    in Show Cluster utility
SET LINK command
    in LATCP
SET LOG command
    in UCM
SET NODE command
    in LANCP utility
    in LATCP
SET/OUTPUT command
    in SYSGEN
SET PORT command
    in LATCP
SET PROFILE command
    in SYSMAN
SET QUORUM command
    avoiding use of /CLUSTER with SYSMAN DO command
SET SCREEN command
    in Show Cluster utility
SET SECURITY command
    /CLASS qualifier
    specifying object class
SET SECURITY/EDIT command #1
SET SECURITY/EDIT command #2
SET SERVICE command
    in LATCP
SET/STARTUP command
    in SYSGEN
SET TIMEOUT command
    in SYSMAN
SETPARAMS.DAT file #1
SETPARAMS.DAT file #2
SETPARAMS phase of AUTOGEN
SETTIME system parameter
Setting page, swap, and dump file sizes
/SHADOW qualifier
    in Analyze/Disk_Structure utility
Shadow sets
    detecting errors
    examining
    maximum number of
SHADOWING system parameter
SHADOW_D1-D5 system parameter
SHADOW_ENABLE system parameter
SHADOW_HBMM_RTC system parameter
SHADOW_MAX_COPY system parameter
SHADOW_MAX_UNIT system parameter
SHADOW_MBR_TMO system parameter
SHADOW_PSM_DLY system parameter
SHADOW_REC_DLY system parameter
SHADOW_SYS_DISK system parameter
SHADOW_SYS_TMO system parameter
SHADOW_SYS_UNIT system parameter
SHADOW_SYS_WAIT system parameter
SHARE command
    in SYSGEN
SHARE/INITIALIZE command
    in SYSGEN
SHOW ACP command
    in LANCP utility
SHOW/ADAPTER command
    in SYSGEN
SHOW/BUS command
    in SYSGEN
SHOW CLUSTER command
    in Show Cluster utility
    initialization file
    keypad commands
Show Cluster utility (SHOW CLUSTER)
    activation time #1
    activation time #2
    activation time #3
    activation time #4
    classes of data
    commands
    continuous mode #1
    continuous mode #2
    controlling displays
    data fields
    defining arrow keys
    defining keypad keys #1
    defining keypad keys #2
    deselecting window
    directing output
    Execute Procedure (@) command
    exiting #1
    exiting #2
    invoking
    keypad
    moving display window #1
    moving display window #2
    /OUTPUT qualifier
    panning display window
    qualifiers
    refreshing the display
    removing display information
    resetting display information
    sample display
    scrolling display window #1
    scrolling display window #2
    selecting display fields
        CIRCUITS class
        CLUSTER class
        CONNECTIONS class
        COUNTERS class
        CREDITS class
        ERRORS class
        LOCAL_PORTS class
        MEMBERS class
        SYSTEMS class
    selecting display window
SHOW command
    in Audit Analysis utility
    in Authorize utility
    in CLUE
    in Point-to-Point Protocol utility
    in SYSGEN
SHOW CONFIGURATION command
    in LANCP utility
SHOW/CONFIGURATION command
    in SYSGEN
SHOW DEFAULT command
    in Monitor utility
SHOW DEVICE command
    in LANCP utility
SHOW/DEVICE command
    in SYSGEN
SHOW DEVICE command
    in UCM
SHOW DLL command
    in LANCP utility
SHOW/DRIVER command
    in SYSGEN
SHOW ENVIRONMENT command #1
SHOW ENVIRONMENT command #2
    in SYSMAN
SHOW HISTORY command
    in POLYCENTER Software Installation utility
SHOW/IDENTIFIER command
    in Authorize utility
SHOW KEY command
    in SYSMAN
SHOW LINK command
    in LATCP
SHOW LOG command
    in LANCP utility
    in LMCP
SHOW NODE command
    in LANCP utility
    in LATCP
SHOW OBJECT command
    in POLYCENTER Software Installation utility
SHOW PORT command
    in LATCP
SHOW PRODUCT command
    in POLYCENTER Software Installation utility
SHOW PROFILE command
    in SYSMAN
SHOW/PROXY command
    in Authorize utility
SHOW QUEUE_ENTRY command
    in LATCP
SHOW RECOVERY_DATA command
    in POLYCENTER Software Installation utility
SHOW/RIGHTS command
    in Authorize utility
SHOW SERVICE command
    in LATCP
SHOW/STARTUP command
SHOW TIMEOUT command
    in SYSMAN
SHOW/TURBOCHANNEL command
    in SYSGEN
SHOW/UNIBUS command
    in SYSGEN
SHOW UTILITY command
    in POLYCENTER Software Installation utility
SHOW_CLUSTER$INIT logical name
SHOW_CLUSTER$INIT:SHOW_CLUSTER.INI initialization file
SHUTDOWN NODE command
    in SYSMAN
SHUTDOWN phase of AUTOGEN
/SINCE qualifier
    in Backup utility
SMCI_FLAGS system parameter
SMCI_PORTS system parameter
SMP_CPUS system parameter
SMP_CPUSH system parameter
SMP_LNGSPINWAIT system parameter
SMP_SANITY_CNT system parameter
SMP_SPINWAIT system parameter
SMP_TICK_CNT system parameter
Software
    listing
        POLYCENTER Software Installation utility
Software products
    files of
        deleting recovery data
        extracting
    removing
SPAWN command
    and ATTACH command
    in LANCP utility
    in LATCP
    in SYSMAN
SPTREQ system parameter
SSINHIBIT system parameter
Stage checks
Standalone BACKUP
Start phase of AUTOGEN
    default
Startup
    logging
    phase
    status
STARTUP ADD command
    in SYSMAN
Startup command procedure #1
Startup command procedure #2
Startup command procedure #3
    setting the name
    site-independent file name
Startup database
    establishing
    files
        adding
        deleting
        disabling
        enabling
        modifying
    setting the default
STARTUP DISABLE command
    in SYSMAN
STARTUP ENABLE command
    in SYSMAN
STARTUP MODIFY command
    in SYSMAN
STARTUP REMOVE command
    in SYSMAN
STARTUP SET DATABASE command
    in SYSMAN
STARTUP SET OPTIONS command
    in SYSMAN
STARTUP SHOW command
    in SYSMAN
STARTUP$STARTUP_LAYERED logical name
STARTUP$STARTUP_VMS logical name
STARTUP_Pn system parameters
    in SYSMAN
STATES class record
    in Monitor utility #1
    in Monitor utility #2
Static service rating #1
Static service rating #2
    displaying #1
    displaying #2
Statistical information
    about volume under verification
/STATISTICS qualifier
    in Analyze/Disk_Structure utility
STATS.DAT file
    created by ANALYZE/DISK_STRUCTURE/STATISTICS
Subprocesses
    creating
        from LATCP #1
        from LATCP #2
        with SPAWN command
        with the LANCP SPAWN command
    switching control of input stream to
Subsystem ACEs
    example
    specifying identifier characteristics
    specifying identifiers
Subsystem attribute #1
Subsystem attribute #2
Subsystem attribute #3
Subsystems
    controlling access to
/SUMMARY qualifier
    in Monitor utility
Swap files
    changing size
    displaying the size calculated by AUTOGEN
    generating a new file sized by AUTOGEN
SWPALLOCINC system parameter
SWPFAIL system parameter
SWPFILCNT system parameter
SWPOUTPGCNT system parameter
SWPRATE system parameter
SWP_PRIO system parameter
Symbol table
    command interpreter
Syntax
    of BACKUP commands
SYS$SYSTEM:STARTUP.COM command procedure
SYSALF.DAT database in SYSMAN
SYSBOOT facility
    using during bootstrap operations
SYSLOST.DIR file
SYSMANINI.INI file
    changing file specification
SYSMWCNT system parameter
SYSPFC system parameter
SYSSER_LOGGING system parameter
SYSTEM class record
    in Monitor utility
System Dump Priority registry
    adding records
    description
    displaying an in-memory copy of the file
    interaction with BUGCHECK
    listing records
    loading contents of file into memory
    modifying an entry in the file
    removing an entry in the file
    unloading an in-memory copy of the file
System Generation utility (SYSGEN)
    assign parameter values
    commands
        AUTOCONFIGURE
        CONFIGURE
        CONNECT/ADAPTER
        CREATE
        DEINSTALL
        DISABLE
        ENABLE
        INSTALL
        LOAD
        RELOAD
        SET
        SET/OUTPUT
        SET/STARTUP
        SHARE
        SHARE/INITIALIZE
        SHOW
        SHOW/ADAPTER
        SHOW/BUS
        SHOW/CONFIGURATION
        SHOW/DEVICE
        SHOW/DRIVER
        SHOW/STARTUP
        SHOW/TURBOCHANNEL
        SHOW/UNIBUS
        TERMINAL
        USE
        WRITE
    directing output #1
    directing output #2
    showing parameter values
    specifying file output #1
    specifying file output #2
    work area #1
    work area #2
    work area #3
System loadable image
    adding
    removing
System management
    clearing counters
    creating disk quota files
    defining target system
    deleting device information #1
    deleting device information #2
    deleting node information #1
    deleting node information #2
    displaying LAN device parameters #1
    displaying LAN device parameters #2
    displaying node information #1
    displaying node information #2
    displaying OPCOM messages
    displaying status and counters #1
    displaying status and counters #2
    displaying status and counters #3
    displaying target environment
    displaying user profile
    displaying wait time for node response
    invoking the LANCP utility
    LANCP SPAWN command
    limiting response time
    MOP console carrier
    MOP trigger boot
    setting device information
    setting wait time for node response
    SYSMAN tasks
System Management utility (SYSMAN)
    commands
        ALF ADD
        ALF REMOVE
        ALF SHOW
        ATTACH
        CLASS_SCHEDULE
        CONFIGURATION SET CLUSTER_AUTH
        CONFIGURATION SET TIME
        CONFIGURATION SHOW CLUSTER_AUTHORIZATION
        CONFIGURATION SHOW TIME
        DEFINE/KEY
        DISKQUOTA ADD
        DISKQUOTA CREATE
        DISKQUOTA DELETE
        DISKQUOTA DISABLE
        DISKQUOTA ENABLE
        DISKQUOTA MODIFY
        DISKQUOTA REBUILD
        DISKQUOTA REMOVE
        DISKQUOTA SHOW
        DO
        DUMP_PRIORITY ADD
        DUMP_PRIORITY LIST
        DUMP_PRIORITY LOAD
        DUMP_PRIORITY MODIFY
        DUMP_PRIORITY REMOVE
        DUMP_PRIORITY SHOW
        DUMP_PRIORITY UNLOAD
        EXIT
        HELP
        IO AUTOCONFIGURE
        IO CONNECT
        IO CREATE_WWID
        IO FIND_WWID
        IO LIST_WWID
        IO LOAD
        IO REBUILD
        IO REPLACE_WWID
        IO SCSI_PATH_VERIFY
        IO SET EXCLUDE
        IO SET PREFIX
        IO SHOW BUS
        IO SHOW DEVICE
        IO SHOW EXCLUDE
        IO SHOW PREFIX
        LICENSE LOAD
        LICENSE UNLOAD
        PARAMETERS DISABLE CHECKS
        PARAMETERS ENABLE CHECKS
        PARAMETERS SET
        PARAMETERS SHOW
        PARAMETERS USE
        PARAMETERS WRITE
        RESERVED_MEMORY ADD
        RESERVED_MEMORY EXTEND
        RESERVED_MEMORY FREE
        RESERVED_MEMORY LIST
        RESERVED_MEMORY MODIFY
        RESERVED_MEMORY REMOVE
        RESERVED_MEMORY SHOW
        SET ENVIRONMENT
        SET PROFILE
        SET TIMEOUT
        SHOW ENVIRONMENT
        SHOW KEY
        SHOW PROFILE
        SHOW TIMEOUT
        SHUTDOWN NODE
        SPAWN
        STARTUP ADD
        STARTUP DISABLE
        STARTUP ENABLE
        STARTUP MODIFY
        STARTUP REMOVE
        STARTUP SET DATABASE
        STARTUP SET OPTIONS
        STARTUP SHOW
        SYS_LOADABLE ADD
        SYS_LOADABLE REMOVE
    common tasks
    executing a command procedure
    executing SYSMAN commands
    exiting from
    initialization file
    invoking
    overview
    privilege requirements
    restrictions
    rights identifiers
System overview statistics
    in Monitor utility
System parameters
    ACP
    affected by AUTOGEN feedback
    categories
    changing
        recommended method
    changing during installation
    checking
    checking AUTOGEN's settings
    default parameter file #1
    default parameter file #2
    disabling checking
    displaying
        device configuration
        device driver addresses
        I/O subsystems
        parameter values
        startup procedure
        UNIBUS I/O addresses
        values
    modifying
        recommended method
    setting
        parameter addresses
        parameter values #1
        parameter values #2
        parameter values #3
        parameter values #4
        parameter values #5
        recommended method
    sharing multiport memory
    showing
    specifying startup procedure #1
    specifying startup procedure #2
    specifying startup procedure #3
    terminal behavior
    VIRTUALPAGECNT #1
    VIRTUALPAGECNT #2
    VMS
    work area #1
    work area #2
    writing contents of
    writing to file
System passwords
System shutdown
    to install changed system parameters #1
    to install changed system parameters #2
System time
    setting
SYSTEMS class
    adding or restoring
    fields belonging to
    removing
SYSTEM_CHECK system parameter
SYSUAF logical name
    defining
SYSUAFs (system user authorization files)
    creating
    default directory entry
    default values
    displaying records in
    modifying
    recreating
    renaming records
SYS_LOADABLE ADD command
    in SYSMAN
SYS_LOADABLE REMOVE command
    in SYSMAN


Previous Next Contents Index